Tea and Miscellany

In 2021, Swarovski (the company that makes the very sparkly crystals you see in certain jewelry, on figure-skaters' twinkliest outfits, on red carpet dresses), decided they didn't want the grubby fingers of small-time jewelers, clothing designers and costumers and crafters on their shiny beads and rhinestones anymore. They decided to limit their sales to "luxury" and couture creators, not girls who sell stuff on Etsy. The tenor of their press release on the subject was snide and insulting. Resellers (like your favorite bead shop) would no longer be allowed to carry their product; the average Jane on the street would not be able to purchase them. You could only get them if you had an authorized business agreement that bound you to very strict brand behavior. And those of us who still had good stock of the crystals would no longer be "permitted" to use the brand's name in our listings for sale.

Every bead shop and craft supply place and many, many small clothing makers--wedding shops, prom and dancing dress suppliers, the sort of salt of the Earth mom and pop time machines of shops that are the backbone of the field--scrambled to find something that could replace them. The last of the stock dwindled quickly, all of us grabbing what we could get while there was any chance of it, and then it was gone and we no longer had any access.

I was Big Pissed about it at the time. It was just so goddamn stuck-up, when wholesalers and indie jewelers had made them so much money, when some people I knew--when *I!*--had been brand-loyal for decades. But with no recourse, everyone pivoted fairly quickly, most of us to Preciosa Crystals. Those are Czech, quite sparkly, and considerably less expensive than Swarovski. The faceting method they use is different, but not worse; any differences are hardly noticeable when you're seeing them as a hundred pinpoints of light.

Well, out of nowhere, Swarovski just dropped this: https://www.harmanbeads.com/swarovski-brand-policy-update

"Effective June 1, 2026, Swarovski updated the distribution and brand usage policies introduced in 2021. Businesses may now purchase Swarovski Crystals without signing a Brand Control Agreement, and Authorized Distribution Partners may once again sell Swarovski Crystals to resellers, including bead stores and online retailers. Businesses may also use the Swarovski brand name when following Swarovski’s Proper Use Guidelines. Designers, manufacturers, artists, brands, retailers, and resellers are now eligible to purchase Swarovski Crystals through authorized distribution channels."

They want us back. A lot of the companies who could have kept a brand relationship with them also have swapped to Preciosa, over the last half-decade, in solidarity with indie creators and out of a sour awareness that it could be them, next. And it doesn't hurt that Preciosa was able to expand their line quite a bit now that everyone who wanted sparkle had no choice but to go to them.

And I'm not seeing nearly anyone who intends to return. The feeling is, "Y'all told us to fuck off! Off we fucked! And now, that's what you can do, too!" I'm seeing a lot of "How many of us did you stab in the back?" comments from the people whose money they're hoping to attract.

So you can avoid them stealing things from you, the artist/writer, etc.

Pro GenAI websites/Programs:

Facebook

Instagram

X/Twitter (Remember, Grok gives people cancer)

Threads

Pro Writing Aid

Grammarly

Duolingo

Google Docs

Microsoft Word/all Microsoft products Takes from and will feed their machine.

Youtube (taking advantage of people who are hearing impaired. ==;;)

Adobe Products. All of them. If you HAVE to use them (Some businesses require it), save offline because there is a film of at least some privacy protections there, so if you have to sue, you can say it violates US privacy law. Remember, contracts do not circumvent US law.

Corel won't feed the machines, but still uses AI stolen from other artists. Which sucks since Corel Draw is the second best overall for vector programs. (Plus I love Painter, but I bought the offline version to avoid AI). (Canadian company)

Canva Takes and feeds their machine.

Deviant Art Not only supports AI, but put a tool in and said they are going to steal your work if you like it or not for their machine.

Sketchup went Pro-GenAI. The thing is that you can do the same thing in Blender these days with precise measurements.

Autodesk has stated they are Pro-Gen AI here. It is not clear if they will use your models to feed their machine. But be on guard. They make Maya and 3Dmax. You can replace it with Blender.

Neutral ground:

Tumblr (there is a way to opt out [Link] and they don't have an active AI machine.) https://www.tumblr.com/dookins/743519550598987776/heres-how-to-disable-third-parties-like-ai

Etsy allows GenAI, but still has some (minor) restrictions. I'd still be cautious. (Also be cautious of drop shippers). Complaints about too much AI and AI images+patterns made by Ai still exist on the website. They lean slightly more pro-AI, but still won't let it run completely amok, say like Facebook. They won't feed your work into a machine, but also don't ban it through robots.txt.

Bluesky They don't use an AI algorithm except for in the "Discover" section of their website, but while they are anti-GenAI strongly, they don't seem to block the Gen AI bots from entry, so you'd still have to use Nightshade or Glaze (links below). There is no opt-out because they don't need an opt out. (Leaning towards strong position on AI, but I wish they would block GenAI bots).

Searxng- If you super want to screw over Google, in general, and have some tech savvy, you can set up your own search engine through searxng. It's easier on Windows and Linux than it is on a Mac. (Mac you need Docker), but if you're determined on privacy, Searxng adds a layer of privacy. Some of it sometimes uses bits of AI, but most of it doesn't and you can fuss with the settings so it doesn't spit out AI results. At sheer minimum Google will stop spitting out weird videos on Youtube at you because in your private browsing, you searched for the origin of ball bearings while not logged in for a book and Google likes to break privacy laws.

Strong positions against AI:

Scrivener (Creator vowed against AI) Writing program. There is an active forum, and versions for Mac, Linux and PC. It is paid, but at ~60 USD, it's cheaper than most programs. There is usually a holiday sale around Christmas. It has a learning curve, but with an active forum with the programmer of it there to ask obscure questions it's not a dead zone. They often take suggestions and implement them over time. (Especially if you rank the importance, applications, etc) US company.

LibreOffice Open source and free Spreadsheet and Word processor program that can replace Microsoft Word. Some people might have seen older versions where it was called Neo Office (now extinct) and Open Office. LibreOffice is still populated, plus the forums are super helpful if you get stuck. The UX is pretty intuitive if you've used Microsoft Word. Scrivener, BTW, supports exporting to odt (the native file) as well as .doc, and this can open both. The slight thing is that sometimes it doesn't export to .doc smoothly. And I DO wish more magazines, and agent (big clue here) supported .odt files since it is free. Part of the reason .odt isn't as supported is because Microsoft and Adobe have a deal with the devil with each other, so Adobe's Book formatting program InDesign doesn't support ODT. (BTW, if you have a good open source replacement for InDesign that supports ODT, let me know.)

Dabble (as suggested by SF stories, see reblog) is a writing program. Similar to Scrivener. Has vowed against AI and to resist it. 108 dollars a year for Basic. It is almost twice the price of Scrivener who lets you update for fairly cheap. 29 dollars a month, v. 59 dollars for the whole program (Scrivener) for the same features of Premium. You choose.

yWriter is a free Writing program and like Scrivener, and has vowed against AI Last I looked it had some UX issues, but some people swear by it. The learning curve is higher than Scrivener which is saying something.

Ellipsus is an online writing program and vowed against AI. The main feature I like (which Scrivener doesn't have) is the ability to change spellcheck based on region/language. It is a requested feature of Scrivener, but lower priority. So if you have a Brit, you can get the spelling for the character. They are a British-based company.

Cara.app (The creator of the website sued GenAI there is no chance they'll convert) is an artist website. Cara is trying to institute an auto Glaze/Nightshade into the website if given enough funds. People see it as a soft replacement for deviant art. (which went fully AI) If you believe in human art, please donate if you can. Zhang Jingna, the Creator,is Chinese-Singporean. She lives in Singapore.

Clip Studio Paint added AI, but saw the light and decided to protect artists instead because of protest and removed it. There are tutorials and a good forum if you get super stuck. Based in Japan, so the UI and UX is really clean.

Davinci Resolve Pro is a film editing software that's super good. There is a free version and a paid version. The forums are responsive. The programmers aren't always present. There is a healthy group of tutorials. US company. Clean UX. It does take a little bit of time to remember the shortcuts.

Tahoma2D is anti-AI and open source animation program. Takes a little getting used to, but is good for animations and doesn't crash as often as Animate. Programmers are in the forums and some bugs are fixed within hours. The forums are super responsive and helpful.

Krita open source and free, no AI. I'd rank it secondary to Clip Studio Paint (which is paid) I haven't tried the forums, but it's pretty intuitive and can stand for a lower level replacement for Painter, and do a lot of the basics of Photoshop. It's usually ranked higher than the equally open source Gimp.

Writer P AKA Writer+ (app for when you're on the go) is a simple word processor app for your phone that doesn't use AI. The original programmer stopped updating, so Writer+ person took over and isn't out to make a profit since it's free in the spirit of the original app. It has subfolders you can use. Since it was programmed before GenAI it doesn't have AI. Intuitive, easy to use. Fairly easy to upload the files through three dots->share. The files can save to your card or phone with some settings fussing. Simple word processor.

Inkscape is a free vector program and no AI. It is harder to use than illustrator and has less features. But if you're doing smaller vectors for one-offs with less complexity, it'll do you after some learning curve. Best of the lot. I hate Affinity Designer which is the same thing, only paid. (Neither Affinity program was worth the money paid)

Affinity (Designer, etc) swore to be AI-free and does Vector and Photos. The UX is messy, I dislike the program and regret paying for it. Inkscape and Krita are better UX and do the same thing. The forums aren't as friendly since there has been an onslaught of people seeing it's supposed to be a replacement for Photoshop and Illustrator, but the programmers aren't present. The people on the forums are often on edge about this assertion. And the capabilities of the program don't outshine basically Krita or Inkscape capabilities (both free). What is usually intuitive is not. UK company. If you're going to pay for a program, go for Clip Studio Paint which rivals Corel Painter.

Blender is a 3D art program and does not use GenAI. It can do 2D animation, but Tahoma is easier to use in this regard. It's open source and free. Plus there are plenty of tutorials. The forums can be touch and go sometimes, but there are plenty of sub Blender communities that might be responsive. It can also do animation.

Handmade vowed against AI and promised to never sell itself for stock prices to prevent AI (as a replacement for Etsy.)

Proton (to replace Google Suite) as suggested by SF Stories (see reblog) Vowed against AI. They are missing a spreadsheet, but have online and offline capabilities, plus a built-in VPN.

But you need a pro website...

Look up robots.txt and AI bots: https://www.cyberciti.biz/web-developer/block-openai-bard-bing-ai-crawler-bots-using-robots-txt-file/

Use cloudflare:

Use Nightshade:

https://nightshade.cs.uchicago.edu/whatis.html

which will poison the algorithm

Use Glaze:

Take Away:

The thing is you think you doing it alone will do nothing, but the more AI feeds on itself, AI images, the worse they become, and the less detailed so, denying it the images, adding poison or not being able to read the human text is eventually going to lead to an AI collapse.

And why not help that along?

I explained very clearly to the manager my issue with the meat section not having the price tags listed, and they claimed it was only going to be for the meat, since meat is by weight, and the price of each item is printed on the packs of each item.

Sure. That’s how they get their foot in the door. Fast forward not even two weeks, and here we are:

Bar codes. No prices, no item descriptions. No price stickers on the individual items. Heck, not even the name of the item that is SUPPOSED to be there.

No. The only way to see the price is to scan it on your phone app, which is also recording what you looked at recently, as a way of gauging what you might be looking for in the future.

So here’s what we’re gonna do gang:

Every time you go into a store that has implemented these price-less tags:

Take 1-3 items up to the cash register. Ask the cashier for the price, or hit the price check item on the self checkout, which will likely call over the attendant.

Express that you didn’t actually want it, you just couldn’t see on the shelf how much it was.

POLITELY, AND WITH A THANK YOU FOR THE PRICE CONFIRMATION, Give the items to the cashier or attendant to put back.

When they inevitably try to push the app, politely decline. If pressed for why not, say you don’t want to have to carry your phone in-hand the whole time you are shopping in order to see how much things cost. (Not having cell service or data to use the app is NOT a valid excuse, as stores already often have complimentary WiFi AND more stores will provide WiFi rather than give up on this push for surveillance pricing)

If it’s a shelf-stable item, the cashier will have to set it aside, taking up room in their limited operating space, and eventually pass it off to someone to put in a holding area to put back later. If it’s a fridge/freezer item, it might have to get tossed due to food product sale regulations.

In either case, you are making it a pain in the ass for them to have these digital bar codes. Tie up the checkouts. Give the employees more busywork that the company has to pay them to do. Hurt their bottom line having to toss the pint of ice cream you carried around in your cart for 20 minutes before giving it back to the cashier.

Anyway I was bitching about how hard it is to come up with feasible planets in Star Wars because sometimes you need a new planet from scratch and sometimes you need to know more about a planet than the 'has jungles, is probably a moon technically' than Wookieepedia will give you, and they're like 'oh yeah I can do something about that'.

So they've written (in Matlab but they swear it will run as a .exe as well and I may be conscripted to embed it as a web tool at some point) a star system generator.

You input what you know about the planet (ecosystem, population, sun colour, does it have liquid water, does it have a moon or moons, is it a moon or moons, temperature averages, atmosphere, you get me) and it will give you the... everything else about the star system, in obedience to real-universe physics. And if you input nothing you get a randomly generated star system.

And I’m like oh I know people who will be into this with a vengeance, and they're not on Tumblr, so this is me seeing who exactly would be keen on, and I cannot stress this enough, a real-physics comprehensive star system generator.

Anyway I was bitching about how hard it is to come up with feasible planets in Star Wars because sometimes you need a new planet from scratch and sometimes you need to know more about a planet than the 'has jungles, is probably a moon technically' than Wookieepedia will give you, and they're like 'oh yeah I can do something about that'.

So they've written (in Matlab but they swear it will run as a .exe as well and I may be conscripted to embed it as a web tool at some point) a star system generator.

You input what you know about the planet (ecosystem, population, sun colour, does it have liquid water, does it have a moon or moons, is it a moon or moons, temperature averages, atmosphere, you get me) and it will give you the... everything else about the star system, in obedience to real-universe physics. And if you input nothing you get a randomly generated star system.

And I’m like oh I know people who will be into this with a vengeance, and they're not on Tumblr, so this is me seeing who exactly would be keen on, and I cannot stress this enough, a real-physics comprehensive star system generator.

air travel is a mess? shortage of air traffic controllers - for some mysterious reason

logistics a mess? shortage of truck drivers - for some mysterious reason

public transit can't meet demand? shortage of bus drivers - for some mysterious reason

We even mysteriously have shortages of doctors, nurses, teachers... FOR SOME MYSTERIOUS REASON

We need to add some *light* weight lifting. I know, boo, hiss, throw the tomatoes.

So you’re stretching out tendons when you work your arms, specifically your wrists. I want you to think of that tendon like a rubber band. What happens when you stretch a rubber band too much? It weakens and eventually breaks. There is such a thing as too much stretching, especially if it doesn’t seem to help the pain. Which is why we also need to build up strength in our arms and hands to counteract that. You don’t need to lift anything heavy. I usually don’t lift heavier than 25 lbs if I’m trying to rehab my hands and arms. And literally all you have to do is walk around with the weights in your hands. Like a suitcase. You can do dumbbells, you can do kettlebells, you can carry your 25lb kid around, I just want you to do it. You can even just carry jugs of milk around at the store if your hands can’t do the weights. And it feels good after a while. You might feel weird just walking around with weights but this is literally how farmers get strong.

No transphobes allowed, only transborbs.

Check out my stuff!

Like. I’ve always sorta understood that things grow moldy or stale or sour or such if left out, but I never really internalized it in a meaningful way.

But now I’m just like.

Yeah. The hungering dust. There exists omnivorous dust in the air that will eat my food if I don’t.

Those bagels have been sitting there for a week. Are we going to eat them soon or are we leaving them for the hungering dust?

Pizza’s been sitting out on the counter for an hour. Everyone’s enjoying the pizza, but if we don’t want “everyone” to include the hungering dust then we should probably put it away soon.

That’s just. That’s how food works to me now. There exists an invisible predator in the air that hungers for your yummies, and it will not hesitate to eat your food if you don’t make the effort to protect and preserve it. And eat what can’t be preserved before the dust can.

“go bad”, it just gets eaten

by something else first