How can I set up the TP-link Range Extender?
Get a high-speed Wireless network across your home with the TP-Link Range Extender. The TP-link device boosts the overall Wi-Fi signal strength and eliminates the Wi-Fi dead zones. Setting up TP-link range extender is a straightforward process and you can complete the process in minutes. This article shows how to configure the TP-Link Wi-Fi range Extender.
You will need the following things to start the TP-Link extender setup process:
Ethernet Cables and Power cables
A computer with a full browser such as Chrome, Firefox, etc.
TP-Link Extender Default Gateway (IP/Web URL)
Network Name And Password
Admin Username And Password
Here are easy instructions to install and configure the TP-link Wi-Fi repeater:
Step 1: Place the TP-Link Extender and Turn it ON
First of all, find an optimal location to place the TP Link repeater. The best location to place the TP-link device is on a shelf. Try placing the extender at the half-way between your wireless router and the computer. Plug in the TP-Link device to the power socket and turn on the device. Wait for the power LED on the TP-link extender to turn green.
Step 2: Connecting to the Network
Now, you need to connect the TP-Link wireless extender to your current home network to extend its range. Connect the extender to the network using either the WPS button or a web-management page.
To set up the TP-Link extender via a WPS button:
Look for the WPS button on the TP-link device and press it. The LED on the extender starts blinking.
Within a minute, press the WPS button on your wireless router and wait for the LED to blink.
If you have a dual-band router then repeat the above steps for the second band (5GHz band).
Now, unplug the TP-Link repeater and move it to the area with poor Wireless range.
To find a good spot to place the device, you can use the LED of your router. Place the TP-Link range extender at a place where extender to router connection is optimal.
Step 3: Configuring the Setting of your TP-link Extender
Once you are connected to the network, you can access the web interface of your extender to control or manage its multiple settings. For this, you need to log into the TP-Link extender using the following simple steps:
First of all, click on the Wi-Fi icon on your computer system and connect to the extender’s network that is TP-LINK_EXTENDER_XXXXXX.
Now, launch a web browser and enter the TP-link extender default IP address in the address bar of the browser. Press ‘Enter’ to open the TP-Link login page.
On the admin page, you need to enter your default email address and password of the TP-link repeater.
Once you click the ‘Login’ button, you will be redirected to the TP-Link extender configuration page where you can manage the internet and security settings.
baratheonpilled
andulkaphoto
dededos