World's Okayest Slipcase Tutorial (?) Part 1 with a lot of badly taken photos and explanation
A while ago me and @edelkirschehandmade were making Project Hail Mary rebinds at the same time, and both of us went the extra mile of making slipcases for it and during the whole process I created a step-by-step tutorial how to make one for edelkirsche in the @renegadeguild satellite channel
Part 1 will be how I made the casing and put them together
Part 2 will be how to glue the cloth on
I learned how to make slipcases by following DAS video tutorial, but if you're like me and not the biggest fan of video tutorial, I will try my best to explain my steps here.
This is not a 1:1 tutorial of DAS slipcase tutorial, this is how I have been making mine. I also use various tool I purchased from Schmedt/iBookbinding that help me keeping the pieces in place when assembling. I will also link them in my posts (nothing is sponsored, needed to hit Schmedt's minimum order amount couple of times and grabbed them.)
So the very first thing you should do is measure your book and write it down on paper. Make sure you are measuring from different spots, as book binding is a manual process and sometimes the measurement can vary by 1-2mm. Write down the biggest measurement you get
I write down the measurements for the TOP/BOTTOM and SPINE piece, and add ~3-4mm. This is to account for the inside paper lining thickness and bookcloth when you fold it over the edge.
Adding too many extra mm could make the slipcase too loose and your book will slip out very easily, and making it too tight means you can't put the book in without having to use force and risk damaging the book and slipcase. My slipcases do tend to end a wee bit on the snug side, still easy to push in but need to shake a few times to get the book out, so I usually add a ribbon to the case to make it easier to remove the book.
DAS measures all the pieces at once. For the FRONT and BACK pieces, you'll have to account in the board thickness into the measurement too, so the math is something like
board thickness*2 + SPINE Length
and the width is 140mm (same as TOP/BOTTOM Length)
BUT, I am bad at math. I had to redo the FRONT and BACK pieces for slipcases soooo many times now I just assemble the SPINE - TOP - BOTTOM pieces first, measure the total from there and then cut the FRONT and BACK. If you hate cutting, and you're more confident in your measurement and math you can also cut the front and back piece at this stage
Another important thing to keep in mind is the grain direction of the board, when you're cutting the pieces the grain direction should be running like this:
Once the pieces are cut, I glue them onto the inside paper lining. Make sure that here the grain direction is also running the same as the board pieces:
After that is done and I have cut the pieces from the paper, I start assembling it:
Make sure that the SPINE piece is sandwiched between the TOP/BOTTOM pieces. A cleaner visual of what I mean by that:
I use the following tools to keep boards in place while the glue is drying:
Magnetic corner clamp, 90°
Corner clamp with guide grooves
Corner clamp, 90°
Once that done, I note down the measurements for the FRONT/BACK pieces:
As I mentioned before, the formula for the FRONT/BACK Length is
board thickness*2 + SPINE Length
my boards are 2.5mm thick
my SPINE length is 213mm
so that means 2.5mm*2 + 213mm = 218mm (which is also the measurement my ruler is giving me yay me)
the width for the FRONT/BACK is 140mm (same as TOP/BOTTOM Length)
Once again, make sure the grain direction of your board is correct, glue the inside paper lining to the board
aaaand it's assmebling time!
I like to use my 3kg coin box as a weight for pressing the board pieces down lmfao
After the glue is dry, your slipcase should look like this:
aaaand that's it for part 1 :) will work on part 2 this weekend, how to apply cloth on
Anya is live and ready to show you everything. Watch her strip, dance, and perform exclusive shows just for you. Interact in real-time and make your fantasies come true.
✓ Live Streaming✓ Interactive Chat✓ Private Shows✓ HD Quality✓ Free Actions
Free to watch • No registration required • HD streaming
Extremely WIP animation to test out character physics. It's not got a whole bunch of life to it and isn't super anatomically accurate yet, but I wanted to share something this week. Very happy with how things are shaping so far.
I was hoping to be able to finish their clothing and environment in time but that's increasingly becoming it's own whole project for when the animations are finished, so for now enjoy the generic onesie and blank test-desert.
Anya is live and ready to show you everything. Watch her strip, dance, and perform exclusive shows just for you. Interact in real-time and make your fantasies come true.
✓ Live Streaming✓ Interactive Chat✓ Private Shows✓ HD Quality✓ Free Actions
Free to watch • No registration required • HD streaming
Pinch hitting for James Jean? What an honor when the best creative director in the biz Eric Skillman called me to do the interior tri-fold discpak for Guillermo Del Toro and Mark Gustafson's Criterion Collection release of Pinocchio. James' insane poster serves at the cover art and he was busy hanging his insane show in Shenzen at the time so I was called in for the additional art. Remember, this film won the Oscar for best animated feature last year! Back to James Jean, he was my hero when I was in school so even being considered to sub for him is crazy to me. You can see the mind of Eric Skillman in image 3 where he mocked up his plan. The last image is an inside baseball peak at additional bleed that needed to be added. I'll post a clip of the whole fold out in action when I get one. Thank you thank you to all involved and Gris Grimly who's also a hero of mine and who's 2003 Pinocchio book was their inspiration and he exec produced too.
Slipcases for Commodore 64, Commodore Amiga and Sinclair ZX Spectrum hardbacks
This triple pack contains slipcases designed to hold the hardback editions of Commodore 64: a visual compendium, Commodore Amiga: a visual compendium and Sinclair ZX Spectrum: a visual compendium. These titles do not come with a slipcase, unlike our more recent visual compendiums, such as N64: a visual compendium.
