#katdana

Most brides plan their wedding outfit. Almost no bride plans the maintenance of their wedding outfit.

The lehenga that sheds beads after the first function is a story I hear too often. So let me share the maintenance routine that has gotten my client lehengas through five major wedding-season functions without visible damage.

Pre-function prep.

Two days before each function, pull the lehenga out of storage. Hang it on a wooden hanger covered with a clean cotton cover. Air it for 24 hours in a shaded, low-humidity room.

This step releases the storage muskiness. The cloth feels fresher. The katdana clusters relax back into their natural drape.

Steam vs no steam.

Never steam katdana directly. The hot moisture loosens thread anchors holding each bead.

If you must remove crease, take the lehenga to a dry cleaner with a katdana specialty. They use vacuum-press techniques that do not apply steam to bead clusters.

For minor creases, lay the lehenga flat for 12 hours. Most katdana creases relax on their own when the cloth lies flat.

During the function.

Sit carefully. Bead clusters break when the wearer sits on the worked panels of the lehenga.

Avoid leaning back against rough chair surfaces. Some wedding chair covers have velcro fasteners that snag bead anchors.

If you spill anything, dab gently with a dry cotton napkin. Do not rub. Water spreads the stain. Pressure breaks beads.

After the function.

Air the lehenga for 6 hours in a shaded room before storing.

Inspect for any loose beads. A loose bead at hour-three of inspection is easier to re-anchor than a lost bead at month-three.

If you find a loose cluster, mark it with a small safety pin. Take the lehenga to a karigar within 14 days for repair. Repair costs are 200 to 600 rupees per cluster restoration if caught early.

Between functions storage.

Roll the lehenga around a cotton-wrapped cardboard core. Do not fold. Folds create stress lines that crack bead coating over time.

Wrap the rolled lehenga in muslin. Add two silica gel sachets. Place in a flat storage box on a shelf, not in a vertical wardrobe hang.

Replace silica sachets every six weeks during monsoon. Once every three months in dry seasons.

Where to source maintenance-grade katdana.

Bridal-grade hand katdana with proper anchor work survives five major functions when cared for properly. Machine katdana with lower thread density needs more careful handling.

The katdana fabric in India collection at Paras Gallery labels bead density and anchor type clearly. Bridal-grade products come with care recommendations on the product page. Use the information to plan your maintenance routine before the wedding date.

Closing thought.

A bridal lehenga is not a one-function garment in 2026. Brides wear their cloth across sangeet, mehendi, reception, and post-wedding family functions. The cloth that survives five functions becomes part of the family memory archive.

The hand-versus-machine debate in katdana fabric never ends. Boutique owners argue it. Brides argue it. Karigars argue it.

Let me share the two-second spot test that ends the debate at the shop counter.

The flip test.

Flip the cloth. Look at the back.

Hand katdana shows individual thread anchors holding each bead. Tiny knots. Slight imperfections in spacing. The back tells you a human stitched this.

Machine katdana shows a continuous machine-stitch trail. Uniform spacing. No knot variation. Looks identical across the whole panel.

Two seconds. Flip and look. You know.

Why this matters.

Hand katdana costs more because hours of human work go into it. The motif depth is richer because the karigar adjusts pressure and angle. The cloth has a tactile quality that machine work cannot replicate.

Machine katdana costs less. Speeds up production. Looks identical from a distance in the photo. Good for budget bridal pieces and mid-tier occasion wear.

Neither is better universally. Each has its place.

When to pick which.

For a main bridal lehenga where the cloth is the centrepiece, hand katdana. The work shows up under camera flash and direct light. The depth carries.

For sangeet bridesmaid outfits, second-day reception pieces, and dressier festive wear, machine katdana works fine. Lower budget, same visual punch from a distance.

What to ask the seller.

Two questions before you order.

One. Is this hand or machine katdana.

Two. Can you send a photo of the back of the cloth.

A genuine seller answers both within a day. The shop that dodges the question or sends only the front photo is hiding something.

Where I source.

The collection at Paras Gallery labels hand and machine katdana separately in the product descriptions. Macro photos cover the front weave. Back-side photos are available on request. If you are looking for genuine katdana fabric in India with the right transparency, this is the workflow.

Start with one metre trial. Confirm the work matches what was described. Then place the full bridal order.

Closing thought.

The flip test takes two seconds and saves you twenty thousand rupees of regret. Use it every time. The cloth will not lie to your hand.

Tiny bead. Big mood. Patient bride energy.

Katdana fabric rewards the bride who picks slowly. The one who handles the fabric in person before committing. The one who studies how the cut beads sit on the base cloth instead of rushing to the discount banner.

Sharing what has been sitting in the katdana corner of my saved folder this month.

Coral katdana on net. The shade of coral that reads warm without being orange. Bead work scattered like a light dusting across the base. Mehendi function obvious match. The kind of piece that photographs beautifully in afternoon sun.

Smoke blue katdana on chiffon. A newer palette direction. Cool-toned. Modern. Worked with silver-lined glass beads that catch light without going loud. Cocktail evening territory. The bride who refuses the standard red script will love this.

Aubergine katdana on raw silk. Deep purple base. Antique gold cut beads worked in mughal floral motifs. Looks heavy in photographs. Lighter on the body than expected because raw silk holds bead weight better than net does. Reception lehenga material.

Champagne katdana on organza. The destination wedding pick. Organza has that crisp transparency that lets the cut beads catch sun on a beach venue. Bride morning function or pre-wedding shoot fabric of choice.

Powder pink katdana with crystal cut beads. The dreamy engagement function pick. Soft. Romantic. Pairs naturally with rose gold jewellery without competing for attention.

What separates good katdana fabric from the disappointing ones.

The bead spacing. Too sparse looks unfinished. Too dense looks like a sequin imitation. Good katdana has rhythm to the placement.

The thread used to attach. Polyester thread will dull within a season. Cotton or silk thread holds and ages well.

The base cloth weight. Net under 40 GSM cannot carry serious bead work without sagging. Always check the cloth before falling for the embroidery.

The patient bride checks all three. The patient bride wins.

A katdana curation I keep returning to when planning the bridal saved folder is katdana fabric in India and the range covers both pastels and the deeper jewel tones.

Adding the smoke blue to the cocktail folder. The aubergine to the reception folder. The powder pink might just steal the engagement slot. The coral is on the maybe-mehendi-maybe-haldi debate.

Tiny beads. Slow decisions. Beautiful outcomes.

Carret Plazzo Dress. #zenfashions

- Carret Featuring Georgette Sequence, Katdana And Pearl Work. - Its Georgette With Boat Neck. - It Comes With Georgette Plazzo And Chiffon Dupatta.