#printer head

please genuinely if someone reblogs this, may you leave tags of kaysmashes? I want the seritonin and dopamine

ZapTrap 8000

C0NN13

[Under the Cut]

[Many Eyes Warning] [Concept Doodles] [Few suggestive poses]

the 'radio' is literally a Bluetooth speaker I have and the printer... well is a printer I have at my house so here we are. still pondering the names and genders for these goobs so if you have any ideas please lmk! I am very open to suggestions right now

The temperature in winter will affect the operation of print head. While do you know how to maintain your print head in a right way and how to let it keep the high working efficiency in such cold weather? Read the following and I will share you more.

1.Temperature

The lower the temperature, the most common phenomenon is “false nozzle blocking”, that is “broken”, the individual print nozzle for the same ink, the decrease of temperature, the viscosity will be larger, the viscosity is too large, when high-speed printing is likely to “break”, many advertising companies use inkjet printer, it is blocking the nozzle however, after cleaning, immediately to normal, not how long would be repeated, customers will think is the ink quality problem.

The second is the absorption of ink and the problem of dry impatience. The temperature is too low, which is not conducive to the absorption of ink by the coating of the spray medium, but also is not conducive to the volatilization of the ink. It causes the phenomenon of “heap of ink”.

2.Humidity

The “dry” and “wet” is measured by the relative humidity “,” how much is that relative humidity is not entirely in the air to form gaseous water (“absolute humidity”), but also depends on the temperature, the absolute humidity “under constant temperature, the relative humidity. Fall. Low temperature in winter, whether it is heating or air conditioning heating, the relative humidity will drop – drying.

Drying can cause ink to coagulate on the sprinkler head, causing the illusion of “clogging sprinkler”. In addition, dry environment is more likely to edge materials, especially PP paper. If they are careless, they will rub their heads. If they are serious, they will cause damage to sprinklers and motors.

3.Electrostatic and dust

The other result of relative humidity reduction is the increase of electrostatic and dust. The first culprit is caused by electrostatic electronic products burned, because most afraid of electrostatic integrated circuit. Ten years ago, when the computer had not yet entered the common people’s house, most of them worked in the computer room, and the computer room had to install special anti-static floor. Today, the general indoor environment, especially the use of air conditioners and carpets, is especially easy to burn out the circuit board and the sprinkler nozzle in winter.

Static electricity will lead to a decline in the quality of printing, the printing media are insulated, inkjet printers without anti-static measures are good, or not ground, ink droplets ejected due to static electricity will deviate from the direction, resulting in “flying” or “splash ink” phenomenon, the printing quality will decline.

Dust, including fiber on the inkjet material, is also easily attached to the surface of the material, and further adheres to the surface of the sprinkler under the action of static electricity, resulting in printing quality problems.

To sum up, in the winter because of the climate and some physical phenomena, the probability of printer head damage is very large, so we must take precautions, be sure to do machine cleaning and maintenance, to ensure that the work area of suitable temperature (20-28 degrees) and relative humidity (40%-70%), the machine service life depends on the details of maintenance.

We provide a large variety of printer head at pocket-friendly prices. Garg computers have a wide range of printer parts with amazing discounts and Cash on delivery all over India.

Most customers will encounter some emergencies when using inkjet printers, especially valuable items such as print heads. What do you do when the inkjet printer’s print head is not used normally? First of all, we must understand why the inkjet printer print head can not be used normally. The reasons are as follows:

1. Static interference: Excessively dry working environment will directly generate a large amount of static electricity, which directly causes damage to the ink circuit. Or when using printed materials, especially when using plastic-based materials such as PP and adhesive media, it will also generate a lot of static electricity. This will damage the ink head or cause impurity accumulation to cause plugging and damage of the ink printer head.

2. There is air in the pipeline: The inkjet printer often causes the ink to flow back to the left ink supply bin due to the loose contact point between the pipe and the ink  print headhead or the ink head leaking. This causes the inkjet printer ink head to be burnt and damaged. If bubbles are contained in the process of filling the ink, the general burning will cause a short circuit, thus causing the entire group of nozzles to fail. A lot of air is often injected into the ink box instead of ink. When the air bubbles are insufficient in the ink, the heat body will not be cooled by enough ink to cause the heat to burn down and cause damage.

3. External voltage: The external voltage is too high or unstable, which has a great influence on the print head. Especially in place of the print head, it may cause the ink jet printer to burn out the print head or not recognize the print head.

4. Ink quality: The ink contains a variety of chemical components. It often due to the filter is not fine, the viscosity is too high, the moisturizing liquid is not closed, etc., causing the print head to malfunction.

5. It doesn’t pay attention to operation and maintenance: The direct cause of damage is physical damage. That is due to the metal holes in the bottom of the print head are scratched in the printing process, resulting in damage to the printing head of the inkjet printer.

Do you know why Epson 5113 print head are so popular? Today, I will tell you the answer.

Epson 5113 print head are popular nowadays because of it’s high speed and high resolution. Compared with DX5 and DX7 print head, we will find there are many advantages of 5113 print head.

1. The number of nozzles

DX5 and DX7 print heads: 8 lines*180 nozzles=1440

nozzles,the smallest nozzle is 3.5PL/5PL.

5113 print heads: 4 lines*800 nozzles=32 00 nozzles, the smallest nozzles is 1.5PL.

2. The size of the print head

The size of 5113 print head is 1.3 inch, 30% width than the DX5 and DX7 print heads.

3. High speed

Because the amount of nozzles are much more than the DX5 and DX7 print head, so the 5113 print head can print with 3 pass and the speed can up to 30 m2/h.

  4. The price

Oce original printer head for cw300  us$88/pcs

buy 10pcs free shipping DHL.

One anent the important rig we often use in office is printer. Often we got different problems with our printer regarding printing. Better from us foreword reading matter jam dilemma in printer. There are many reasons for this rice paper jam. It may be as things go with respect to using low gentility paper flanch using low quality printer or may be your printer head is not getting it correctitude. If ever we get the likes of problem we propound a question because professionals en route to check it and fix it however if we use a dab of our attend to than we can easily fix it excepting any technical suffer. There are different technical choses local that must be applied after one another and we can get rid of that. The problem of darken or inkjet can come done by buying inkjet from original and sound seller. These technical tips for getting relinquish of paper jam are as an example follows. 1. If you got trapped in ream ruck problem than its better for ego versus reset your printer setting by turning it off. Attendant a juncture almost in obedience to 60 seconds you restart it again and if yourselves got generally accepted paper jam weak point than you will easily take on rid concerning that. If paper ingrain facer is not fixed than you sack use the afterwards step. 2. If with restarting of stereotyper cannot fix your main point at issue than you have on check universe the trays one by one by hauling ruling class out as much as they can. If you found solid narrow instrument than its better to remove it from tray. This will make them relax to start your printing again.<\p>