always reaching, never grasping

And that this is actually a really fun, low cost way to not only access news and larger cultural magazines, but also to get free patterns for many different crafts that you can screenshot if need be and that lower the financial barriers to entry for trying new things

From my experience working in both academic and public libraries, many libraries are use it or lose it funding-- I have to say this because a lot of patrons feel guilty for how much they use the library and how often they're using it funny enough, but the worst thing you can do for libraries is not try out new features and not use what's already given to you as much as possible.

go to discord support ( https://support.discord.com )

sign in or sign up (you do not, and imo should not, use the name and email you use for discord proper. this is a different account; if you've got Firefox, you can use an email relay mask very easily, and the email will end up in your inbox but the site won't know your email from it)

"Submit a request" (at the top)

fill all the dropdowns (I did "Help & Support" -> "Technical Support" -> "Account Settings" -> "[OS type"). it won't let you proceed until you do

Subject line: something about age verification

description box: keep it civil, but be clear. you don't like this, you're not participating, and you're not giving them your money anymore (whether you had nitro or not is irrelevant, remember that you didn't use your actual discord login to get here and they have no way to verify).

some reasons possibly worth mentioning: the insecurity of databases (Discord's had multiple leaks; databases being hacked isn't possible to prevent afaik, it's a matter of mitigation), the dangers of putting one's govt id on such a database, the technical problems people are already experiencing where it's already been established, how it will disrupt communities

be very clear that this is going to cost them money. "I won't use your service anymore" is a common threat ("I'm never shopping here again!") - you need to make them feel that they are losing money just by considering it, and it will get much worse if it's implemented.

Long time no update!

My apologies for that, my health kept taking more and more twists and turns. As of February, I am diagnosed with dermatomyositis in combination with my original diagnosis of POTS. In short, dermatomyositis is a disease where your immune system begins to attack your muscles. It also often presents with a painful skin rash but I, so far, have been lucky enough to not have that. One of the main symptoms of it is ironically struggling with stairs, who would have guessed?

While my health continued to decline before my diagnosis, I unfortunately did have to dip into my funds here in order to keep my current housing and to pay some of the rising medical debt. I missed a fair amount of work due to pain and other symptoms that I experienced as I went through a few different medications. Thankfully, I was eventually able to work remotely and that has helped the situation.

The other apartments I mentioned in the last post unfortunately never returned my phone calls once I was looking to sign a lease. I ended up signing a 6 month lease to stay in my current apartment out of necessity.

But in more positive news, I have been approved for a low income and ADA compliant apartment!!!

The catch is that it is across the state, closer to the coast. This means the distance I have to move is much greater (about 3 and a half hours) and therefore the costs are going to be higher than I originally anticipated.

I wanted the birds to look like they were actually in the space so first thing after doing the draft was to do a lighting study

after that I covered the walls in letters in lieu of a projector/vr headset bc i have neither of those :) Then i take a picture of the section of wall and superimpose the lineart over top of it so I can pencil in the lines

et voila

GIVE IT UP FOR BIRD NUMBUH 5, THE CANADIAN GOOSE, Branta canadensis!!!!

bird 5/14, Bluejay, Cyanocitta cristata

birds 6 and 7: American Goldfinch, Spinus tristis, male and female

BIRD NUMBER 8, (yellow shafted) NORTHERN FLICKERRRRR, Colaptes auratus

genuinely made me start questioning my sanity around day 3, it's half the size the of the goose, WHY did it take me 4 days to finish??

Bird number 9: Red-tailed hawk, Buteo jamaicensis

my chains are broken i am FREE. although i did have a great deal of fun with this, the barring on the wings itself took me like four days and i am READY to move on

this was a week and a half of continuous work so please excuse me for getting a little emotional in the bg 🙏

BIRD NUMBER 10!!! The Male Mallard Duck, Anas platyrhynchos

the male and female ones are gonna be posted separately bc they're taking a lot longer lol but yea! super happy i was able to capture the iridescent green of the head, i found metallic green and blue paint at a craft store that really made his head POP. it looks better in person i promise

ALSO!! As this is the 10th one, BIG announcement. The end is in sight!!!!! I plan to finish within the next 3 weeks and there will be a small dedication ceremony/ unveiling happening at the library to commemorate its completion on the 16th of May. If you live in the Western New York region and want to check it out for yourself shoot me a dm!

Absolutely nothing about this design is convenient to execute in wood. Every piece is curved, most have compound curves. This is artisan craftsmanship: it's inherently slow, manual, and skilled. Notice, also, that most features of this chair must be thicker and heavier than on the plastic chairs being imitated. Injection-molded chairs can be produced in this shape in a matter of minutes with far less material at very low cost.

The standard one-piece injection molded plastic chair is referred to as a "Monobloc", literally just describing it as a single piece. The history of this chair is fascinating, and it all starts back in 1946, with the D.C. Simpson Monobloc.

Douglas Colborne Simpson was an architect mostly active in the 40's and 50's, designing a lot of classic mid-century style buildings in Vancouver, Canada(1). In 1946, as part of a government project to find new uses for materials developed for WWII, he and engineer James Donahue developed the design you see above, simply called the Monobloc(2). Unfortunately, we don't know a lot about this chair as it was only ever a prototype, and no modern examples have survived, nor have most of the records surrounding it(3). To my knowledge, we don't actually know if this was technically injection molded, or crafted some other way. We can't even be sure if it was technically the inspiration for the designs that followed, but no matter the case it has lent its name to the entire genre.

Plastics technology was simply not what it is today back in the 1940's. Most people would have had very little plastic in their homes, most likely just a few pieces of Bakelite (the first commercially viable plastic, made from a formaldehyde based resin in a Bakelizer, the best name for any industrial manufacturing equipment ever). Over the following few decades, however, as a wider variety of plastics were both developed and came down in price to the point of commercial viability, the concept of the plastic chair was revisited, and the first folks to revisit it were Helmut Batzner, in 1964, and Joe Colombo, in 1965.

This, is the Bofinger chair, Batzner's design:

The elements of D.C.Simpson's Monobloc were pretty alien compared to todays mass-manufactured plastic chairs, but here we start to see some more modern elements come into play. The first thing you probably notice is the front legs, which have that characteristic visible 90 degree bend in them for added rigidity, plus a much more comfortably leaned back and slightly scoop-shaped seat. We also see much more support in the back rest, with broad triangles allowing for a more efficient use of materials without losing back support.

Similar to Simpson, Batzner was not an industrial designer, but an architect, and this chair had a very specific purpose. Batzner and his team designed it as part of a project to build a new theater in Karlsruhe, Germany, which required a large amount of additional seating which could be easily packed away into storage or distributed around the theaters rooms by the staff (4). As such, it was designed to be both lightweight and stackable, so several of them could be moved by one person, and they could be stored compactly. This piece of furniture was a huge hit a the theater, and was so popular that 120,000 units would ultimately be manufactured and sold around the world, with each one taking just 5 minutes to produce (4).

Around the same time, Joe Colombo enters the scene with this:

Colombo was an artist in several mediums who, after taking over his families appliance company in the 50's, made the shift towards architecture and interior design, and started designing a wide array of trend-setting furniture(5). The chair shown above is known as the Universale (sometimes referred to as the Chair Universal 4867), designed in 1965. This chair differs pretty greatly from the ones that came after it, it many ways it represents a different path that could have been taken, but it's also very widely referenced as an inspiration for what is broadly considered the origin of the white plastic chair the world over.

Enter: the Fauteuil 300

This is, arguably, the first iteration of the white plastic chair we all know today. Designed by Henry Massonnet in 1972, the Fauteuil 300 and it's imitators are, collectively, the single most widely used piece of furniture in the entire world(6). Before that, however, it was something else entirely: works of art.

What might be hard to recognize in hindsight is that all of these chairs described so far were not everyday objects. They were on the forefront of modern design, they made use of brand new materials and manufacturing processes, and at the time they were each made, they were slick, stylish, and fairly expensive. Despite the speed at which they could be manufactured, these innovative, high-end chairs rose sharply in cost up through the early 1980's due to the sheer demand for them. They weren't cheap spare seating you stuck in the garage, they were placed at dining tables and on fine patios, and they were a wildly popular talking point. That's not to say their expense justified their artistic value, but rather that their expense and popularity was a product of their status as highly contemporary and boundary-pushing designs.

With the price of plastics declining after the 70's, the increasing accessibility of injection molding to manufacturers, and the widespread popularity of these designs, copycats proliferated rapidly, and eventually drove the price down. This era, in the 80's and 90's, is when these chairs became cheap an ubiquitous, and where they became manufactured the world over.

And here is where we reach this piece, "Plastic chair in wood", by Maarten Baas, and a piece of the history I've left out so far. The Monobloc was designed to be made out of wood. Like the the other chairs designed by Joe Colombo, like the chairs that predated the Simpson, the Monobloc was designed with the intention of using laminated plywood, but as the artists and designers behind them began to experiment with new materials they fell in love with the idea of making them from plastic, and so they did. They redesigned and redesigned until they made something that would be impossible to make in wood at a price most people could afford, but which could be made from plastic in mere minutes. The organic curves and thin profiles would take so much time, so much waste material, so much skill and effort to create if made of wood that they could never be furniture, they could only be art. Baas' chair is a perfect, beautiful reflection of that.

That, in brief, is the history of the design of the white plastic Monobloc chair, but it's not all there is to know. In fact, it's kind of just the start. I've linked my sources below, but I would strongly recommend checking out the German documentary Monobloc, by Hauke Wendler. It goes over the history, but it's far more interested with what the Monobloc means, and what it's place is in our world today. The impact it's made, the better and the worse, and what it says about us. It's fascinating, and well worth your time.

sources below.