Mikrometry instruments limited

https://www.mikrometry.com/products/etg15fn-eddy-current-digital-coating-thickness-gau.html

Mikrometry digital coating thickness meter gauge ETG15FN is an economical choice that provides high quality measurement of the paint thickness of car. ETG15FN is a dual-purpose elecoat coating thickness gauge with integrated design of sensor and host. It adopts the principle of magnetic method and eddy current method for measurement.

 This gauge for measuring thickness can automatically identify ferrous and non-ferrous substrates. It can be used for non-destructive measurement of non-magnetic metal substrates or the thickness of the non-conductive coating layer on the non-magnetic substrate, this instrument is suitable for non-destructive with fast and precise measurement.

 Compared with magnetic coating thickness gauge, the curent digital coating thickness meter gauge is suitable for non-conductive layer thickness measurement on conductive metals.

 Features Of ETG15FN Eddy Current Digital Coating Thickness Gauge

· Very compact size with integrated probe.

· Magnetic induction method & Eddy Current (ISO 2178, ISO2160, ASTM D7091), Measure of the thickness of non ferromagnetic coating on ferromagnetic substrate and non-conductive coating on non-magnetic metal collective.

· Quick one-hand operation. Place instrument on specimen and see the measured value.

· Ready to measure immediately without calibration.

· Easy to perform zero-point correction provides correct measurement results for measuring applications with little changes in shape and substrate material.

· The one-point calibration function allows for an adaptation in cases of severe changes in shape or substrate material and enables high-precision measurements in selected measurement ranges.

· Data transmitting to PC via USB cable.

· Statistic function allows for evaluation of a measurement series and display of the most significant characteristic statistical values.

· Auto power off.

· Wireless mini-printer.

 Specifications Of ETG15FN Eddy Current Digital Coating Thickness Gauge

 Test Method

Magnetic induction & Eddy current

Measuring Range

0-1500um(0-60mil)

Resolution

0-999um:0.1um ≥1000um:1um

Accuracy

0-100um:±1.5um 101-1500um:≤1.5%

Data Memory

1500 readings

Interface

USB data transmission (with PCB software)

Display

Dot matrix LCD screen with backlight (128X64)

Operating Temperature

0-50℃

Power Supply

1.5V*3 (AAA alkaline batteries)

Dimension

88*67*30 mm

Weight

120 g

Matrix

Iron matrix, aluminum matrix

 Standard content of shipment

 Thickness gauge, Substrate plate, Certification foils set, 3 AAA alkaline batteries, Data cable, Data logger software, Leather sheath, User's manual, Manufacturer's certificate.

 Other Coating Metal Thickness Gauge

https://www.mikrometry.com/products/etg12n-eddy-current-digital-paint-thickness-gauge.html

The paint coating thickness gauge meter is designed for non-destructively measuring the thickness of coating and painting. The digital coating thickness meter gauge tester is essential for material surface treatment and widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and able to work steadily in the laboratory, workshop and outdoor, used as the paint gauge for cars or paint mil thickness gauge tester. This paint thickness measuring device with n probe works on the eddy current principle and should be used for detecting the insulating coating's thickness such as paint/anodizing/ceramics on the aluminum/copper/brass substrate.

 With plenty of features and advantages, paint thickness measuring gague instrument can enhance your working effeciency and reduce your cost. We have a series of paint thickness measurement device for sale, with good performance and attractive price. So, if you have any interest about our paint inspection gauge, please make contact with us or directly make a purchase.

 Feature of ETG12N Eddy Current Digital Paint Thickness Gauge

 · Very compact size with integrated probe

· Eddy current method (ISO 2360, ASTM D7091), measurement of non-conductive coating on non-magnetic metal collectives

· Data memory is up to 500 readings.

· Ready to measure immediately without calibration.

· Easy to perform zero-point correction provides correct measurement results for measuring applications with little changes in shape and substrate material.

· The one-point calibration function allows for an adaption in cases of severe changes in shape or substrate material and enables high-precision measurements in selected measurement ranges.

· Statistic function allows for evaluation of a measurement series and display of the most significant characteristic statistical values.

 Specifications of ETG12N Eddy Current Digital Paint Thickness Gauge

 Model

ETG12N1

Test Method

Eddy Current

Measuring Range

0-1250 um (0-50 mil)

Resolution

0-999 um: 0.1 um

≥1000 um: 1 um

Accuracy

≤100 um: ±2 um

101-1250 um: ≤2.5%

Data Memory

500 readings

Display

Dot backlit dot matrix LCD screen ( 128* 64)

Power Supply

1.5V*3(AAA alkaline batteries)

Operating Temperature

0-50℃

Size

128*51*31 mm

Weight

110 g

Matrix

Aluminum substrate

 Other Coating Metal Thickness Gauge

https://www.mikrometry.com/products/etg12f1-magnetic-coating-thickness-gauge.html

The Coating Magnetic Thickness Gauge ETG12F1 is a professional tool and at the same time easy-to-use device that is used for accurate measurements of coatings or coatings on various metal surfaces. High dust, gas pollution, changes in humidity and temperature will not stop the operation of this magnetic pull off gauge device. This magnetic paint thickness gauge is designed to not-destructively measure the thickness of non-magnetic coatings(including paint, enamel, plastic, epoxy, etc)on iron or steel.

 The measuring paint thickness on metal is mainly measured and determined based on this pulling force. Thinner coatings generally have greater magnetic attraction, while thicker film coatings have relatively less magnetic attraction. The magnetic pull off thickness gauge is very sensitive to measuring the surface roughness, curvature, substrate thickness and composition of metal alloys of samples.

 Different from magnetic coating thickness gauge, current digital coating thickness gauge  is generally used to measure the thickness of insulating coatings on non-ferrous metal substrates. This method is also a non-destructive measurement method.

 As one of the advanced testing and measuring instruments companies, our magnetic paint and coating thickness gauge is durable, simple, cheap and easy to carry, and usually does not require calibration and adjustment. They will be a good low-cost measurement solution.

 Feature of ETG12F1 Magnetic Coating Thickness Gauge

 · Very compact size with integrated probe

· Magnetic induction method (ISO 2178, ASTM D7091), measurement of non-magnetic coatings on magnetic substrates

· Data memory is up to 500 readings.

· Ready to measure immediately without calibration.

· Easy to perform zero-point correction provides correct measurement results for measuring applications with little changes in shape and substrate material.

· The one-point calibration function allows for an adaption in cases of severe changes in shape or substrate material and enables high-precision measurements in selected measurement ranges.

· Statistic function allows for evaluation of a measurement series and display of the most significant characteristic statistical values.

 Specifications Of ETG12F1 Magnetic Coating Thickness Gauge

 Test Method

Magnetic induction

Measuring Range

0-1250μm (0~50 mil)

Resolution

0~999 μm:0.1μm

≥1000μm：1μm

Accuracy

0~100：±2.0μm

101~1250μm：≤ 2.5 %

Data Memory

500 readings

Display

Graphic LCD with backlight

Power Supply

1.5V*3(AAA alkaline batteries)

Operating Temperature

0~50℃

Dimension

150 * 50.5 * 29 mm

Weight

110 g

Accessories

Thickness gauge, substrate, certification foils set, user manual, manufacturer certificate

Certificate

CE

 Other Coating Metal Thickness Gauge

https://www.mikrometry.com/products/est-tt2-manual-torque-test-stand.html

Mikrometry EST-TT2 torque test stand is a vertical diesel engine test bench, used for pressure wrenches, screwdrivers, rotors and other diesel testing, the overall structure design is reasonable, the handwheel operation loading, reducing the error of manual measurement.

 Our sensor or ETT series digital torque tester can be optionally matched by our EST-TT2 torque test stand.

 Feature of EST-TT2 Manual Torque Test Stand

 Handwheel, reducer loading more labor-saving.

The slider can be adjusted up and down.

All aluminum frame, more stable measurement

Optional with our sensor or ETT series digital torque tester

 Specification of EST-TT2 Manual Torque Test Stand

 Maximum Torque

100 N.m

Angular Travel

CW or CWW no limit

Angular Rate

9°/ wheel rev.

Throat

120 mm

Slider Adjustable Height

430 mm (Max)

Slider Stroke

45 mm

Dimension

336*330*750mm

Weight

19 kg

 Other Test Stand

https://www.mikrometry.com/products/est-hs2-manual-durometer-test-stand.html

EST-HS2 durometer test stand is a test stand for durometer. The test stand is a workbench for loading Shore hardness tester testing. Using three-point leveling stainless steel work platform, the durometer test stand is more stable, the measurement result is more accurate, the overall structure is reasonable.

 Compared with shore hardness gauge, EST-HS2 durometer test stand can test various types of Shore hardness.

 Features of EST-HS2 Manual Durometer Test Stand

 It can test various types of shore hardness.

Cam-type loading and unloading make the test process more stable.

Operation type: the indenter pressed against the sample

The measuring rod can be adjusted by lifting.

Workbench adjustment: three-point leveling.

 Specification of EST-HS2 Manual Durometer Test Stand

 Operating Type

Inverter to specimen

Loading Method

Cam loading

Loading Stroke

18 mm

Specimen Thickness

60 mm

Throat Depth

65 mm

Support Table(dia.)

Φ116 mm

Lifting Adjustment

Screw adjustment

Table Adjustment

Three-point leveling

Net Weight

5.6 kg (excluding S weight)

Package Weight

7.6 kg (excluding D weight)

 Other Test Stand

https://www.mikrometry.com/products/est-fg2-manual-force-measurement-test-stand.html

The test stand EST-FG2V/H is a electric motor test stand. It has a built-in DC motor, displacement measurement device, good load stability, wide application range; wide bench test speed, high accuracy; manual control, displacement cycle, and force value cycle functions. The manual test stand can be connected with a dynamometer to measure the force value and displacement, which is suitable for various industries such as push-pull load, plug-in force, fatigue test, and destruction test.

 Features of EST-FG2 Manual Force Measurement Test Stand

 Motorized driving.

Rugged construction

Capacity Up to 650 N (140 lbf,65kgf)

Multiple operation modes

Three-stage programmable cycle

Teaching & Playback programming

Force gauge data integration

USB connection to PC

Multiple limit protection functions

 Specification of EST-FG2 Manual Force Measurement Test Stand

 Capacity

650N (65KG, 140lbf)

Stroke

220 mm

Speed

Adjustable Range: 30~720 mm/min

Resolution:0.1 mm/min

Accuracy: ±1 mm/min

Displacement

Resolution: 0.01 mm

Accuracy: ± 0.2mm/min

Operation Mode

Manual, Cycle, Demo, Locating Mode

Protection Functions

Position Limit

Force Limit (connected to force gauge)

Locked rotor.

Power Protection

Cycle Program

Three-stage cycle

Displacement-based (D-cycle)

Force-based(F-cycle)

Outputs

USB-B(connect to PC)

RS232 outputs

Set point output,

RS232(connect with force gauge)

Operating Environment

0 to 40℃,20 to 80% RH

Power Supply

AC100~240V,1A

Dimensions

630 x 320 x 180 mm(EST-FG2V)

640 x 125 x 278 mm(EST-FG2H)

Weight

Approx. 13kg

https://www.mikrometry.com/products/est-fg1v-motorized-force-measurement-test-stand.html

The force gauge test stand EST-FG1 is widely used in various industries or scientific research institutions for tension and compression load, insertion and extraction force, damage test, etc. The frame of the motorized test stand is driven by trapezoidal screw, with manual operation, simple and stable, and can be equipped with digital caliper to measure the displacement changes of various test forces.

 Other Test Stand

https://www.mikrometry.com/products/ehs-shore-durometer.html

EHS1A/5D is a high-precision shore hardness meter. This EHS digital shore hardness tester adopts high-precision displacement sensor and spring design with high test accuracy.

 Shore durmeter meter/tester has three measurement modes: maximum mode, maximum average mode, and timing mode; 500 measurement data can be stored as one type of hardness test instrument, and the measurement data can be connected to PC software to export, built-in wireless printing function, you can connect wireless printer to print measurement data.

 The digital shore hardness tester/durometer gauge price from our measuring instruments manufacturing company is very reasonable, welcome to order our durometer rubber roller hardness tester units. The shore A durometer gauge is used to measure soft plastic, rubber, synthetic rubber, felt, and leather. The shore A hardness test method is either hand-held for measurement or used in conjunction with the supporting load frame, and durometer hardness unit is the "degree". Different from the leeb portable hardness tester which is mainly used to test the hardness of metal materials, the shore durometer meter is focused on rubber and soft plastic hardness test.

 Features Of EHS Shore Durometer-1600

 · Calibration certificate included

· Conforms to ASTM D 2240, GB/T 531.1, ISO7619-1

· A large, easy to read LCD display with a backlight

· Measurement mode: Averaging mode, Max mode, Max-Average mode

· Measurement data can be stored, browsing, and batch printing.

· Printing: Wireless mini printer

 Specifications Of EHS Shore Durometer-1600

Shore hardness testers are usually classified into following types. Digital durometer shore A is used for measurements below 90 degrees, and shore D hardness durometer tester is used for measurements above HA 90 degrees. Shore O hardness shore o durometer tester for rubber is used when the measuring degree is less than 20 degrees and the thickness of the measuring object is less than 3mm (the two are actually used less).

 Accuracy

≤±1 H

Resolution

0.1 H

Display

128 * 64 dot matrix LCD with backlight

Memory

500 readings

Power

1.5V *3 (AAA alkaline batteries)

Operating Environment

-10 to 40℃，20 to 80% RH

Dimensions

150 * 50.5 * 29 mm

Weight

170g

  Model

Type

Indenter

Application

EHS1A

A

 Soft vulcanized rubber, natural rubber, nitriles thermoplastic elastomers. flexible polyacrylics and thermosets. wax, felt, and leathers

EHS5C

C

Medium-hard rubber, thermoplastic elastomers, medium-hard plastics, and thermoplastics

EHS5D

D

 Hard rubber. thermoplastic elastomers. harder plastics, and thermoplastics

EHS1B

B

Moderately hard rubber, thermoplastic elastomers, paper products, and fibrous materials

EHSoo

OO

 Soft rubber, thermoplastic elastomers, very soft plastics, and thermoplastics, medium-density textile windings

EHSo

O

Extremely soft rubber, thermoplastic elastomers. sponge extremely soft plastics and thermoplastics, foams, low-density textile windings, human and animal tissue

EHSdo

DO

Moderately hard rubber, thermoplastic elastomers, and very dense textile windings

 Other Hardness Tester

https://www.mikrometry.com/products/ehp110-rebound-leeb-hardness-tester.html

The NEW Leeb Hardness Tester is a very handy portable, but powerful and versatile hardness tester for different kind of metallic materials including steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminum alloys, brass (copper-zinc alloys), Bronze(copper-aluminum alloys/copper-tin alloys) and wrought copper alloys with high accuracy, suitable for use under tough working conditions.

 This type of digital hardness testing machine can be used at any angle, even upside down. The rebound hardness tester can be used on rapid testing in a large range and multi-measuring areas for the large-scale workpieces.

 Feature Of EHP110 Rebound Leeb Hardness Tester

 · Large screen LCD, showing all functions and parameters. With background light.

· Seven optional impact devices are available for special application. Automatically identify the type of impact devices.

· Test at any angle, even upside down.

· Direct display of hardness scales HRC, HRA, HRB, HB, HV, HSD, MPa

· Large memory could store 100 groups of information including single measured value, mean value, impact direction, impact times, material and hardness scale etc.

· Conforms to the Standard GB/T17394, GB/T1172,ASTM A956 & DIN 50156

 Specification Of EHP110 Rebound Leeb Hardness Tester

 Accuracy

± 6 HL

Scales

HRC, HRA,HRB, HB, HV, HSD, MPa

Display

160 * 128 dot matrix LCD with backlight

Testing direction

All direction

Optional Impact Device

D,DC,DL,C,D+15,G

Data Memory

1000 readings

Operating voltage

4.5V (3 AAA batteries)

Operating environment

Temperature ：-10～+40℃

Humidity: 20%～85%

Storage environment

Temperature ：-30～+80℃

Humidity:5%～95%

Dimensions

154mm*82mm*26mm

Weight

Approx.230g

Accessories

Display Unit, Impact Device D, Test Block, Mini-printer, Charger, Little Support Ring, Cleaning Brush

Optional

Mini printer

Certificate

CE

 Other Hardness Tester

https://www.mikrometry.com/products/torque-tester/

Torque tester are mainly divided into two types: dynamic torque meters and static torque meters. Dynamic torque meters are generally dedicated dynamic torque sensors. Static torque meters are generally measured manually. Our main products are static digital torque meters.

 The use of torque meters is very wide, from the tightness of the lids of various containers such as cosmetics, medical equipment and beverages, the tightness of screws, the torque of valve opening and closing, and various torques can be accurately measured. Now it is widely used in the camera industry, mainly to measure the torque of the camera lens when zooming.

 Type of torque tester

https://www.mikrometry.com/products/test-stand/

Mikrometry test stands can be programmed for advanced test sequences for demanding applications.

https://www.mikrometry.com/products/hardness-tester/

Portable hardness testers are used for checking the surface hardness of very large and hard materials. Test any materials in almost any situation with the Mikrometry hardness tester. It's small and light, easy to carry. To take a reading, simply load the impact body, place it on the test piece (a flat or round surface), and then press the button to take the reading.

 Types of Hardness Tester

https://www.mikrometry.com/products/ettb-torque-meter.html

The series ETTB digital torque tester is a simple operation test instrument, the torque tool tester provides testing manual, electric, and pneumatic torque screwdrivers, wrenches, and other tools.

 Feature Of ETTB Torque Meter

Curve or digital display modes

Reverse display setting

Calibration certificate Included

Charger with US/EUR/UK Plugs selectable

USB or RS232 communication interface, easy to communicate with PLC

Accuracy: ± 0.3% Readings

Sampling Rate: up to 2KHz

 Specifications Of ETTB Torque Meter

 Range

5%~100% Capacity

Accuracy

± 0.3% Readings

Selectable Units

N.m、N.cm、kgf.cm、lbf.ft、lbf.in

Display

240*160 dot matrix LCD(3.1 inch) with LED Backlight

Overload Capacity

120% of F.S.

Measurement Mode

Track, Peak, First Peak、Auto Peak、Auto First Peak、Double Peak

Display Mode

Digital / Curve

Data Sampling Rate

Up to 2KHz

Memory

1000 data

SetPoint

Programmable high and low limits

Battery Indicator

The display flashes the battery icon when the battery is low

Power

3.6VDC 1600mAH Ni-Mh rechargeable batteries

Battery Life

Approx. 25 hours per charge

Charger / Adaptor

Universal USB/BM charger, Input:110~240VAC

Temperature Effects

<0.03% FS per °C

Communication

USB or RS-232

Software

Free software for USB communication

Outputs

RS-232, "Within" set point output， "Under or over" set point output

Operating environment

Temperature: -10 to 40°C

Relative Humidity:  20 to 80%

Storage environment

Temperature: -20 to +50°C

Relative Humidity:  5 to 90%

Dimension

197X183X83 mm

Weight

~ 1.6 kg

Accessories

AC adapter/charger, USB cable, Square drive adapter

Options

Mini-printer, RS-232 Cable, Rundown Adapter, ETS-TT1 Torque Test Stand, ETS-TT2 Torque Test Stand.

 Model

Capacity/Resolution

N.m

N.cm

kgf.cm

lbf.ft

lbf.in

Interface

ETTB2

0.1~2/0.0002

10~200/0.02

1~20/0.002

0.07~1.48/0.0002

0.89~17.7/0.002

☐ 12.5(1/2"), ☐ 6.3(1/4")

ETTB5

0.25~5/0.005

25~500/0.05

2.5~50/0.005

0.18~3.7/0.0005

2.2~44.3/0.005

ETTB10

0.5~10/0.001

50~1000/0.1

5~100/0.01

0.37~7.4/0.001

4.4~88.5/0.01

ETTB20

1~20/0.002

100~2000/0.2

10~200/0.02

0.7~14.8/0.002

8.9~177/0.02

☐ 12.5(1/2"), ☐ 10(3/8")

ETTB50

2.5~50/0.005

250~5000/0.5

25~500/0.05

1.8~36.8/0.005

22~443/0.05

ETTB100

5~100/0.01

500~10000/1

50~1000/0.1

3.7~74/0.01

https://www.mikrometry.com/products/etta-advanced-digital-torque-indicator.html

Mikrometry digital torque gauge is a designed with our torque senser. It main used in testing and calibrating tighten force, parts torsional destructive testing, etc. With features of simple operation, high precision, easy to carry, complete functions etc. It’s widely used in various kinds of electric, light industry, machinery manufacturing, research institutions, etc.

 Feature Of ETTA Advanced Digital Torque Indicators

 Durable metal case

Automatic reversible display

Touch key for minimized disturbance

Automatic load cell identification

Curve or digital display modes

Calibration certificate Included

Charger with US/EUR/UK Plugs selectable

USB or RS232 communication interface, easy to communicate with PLC

Low battery alarm

Accuracy: ± 0.3% @Readings

Sampling Rate: up to 2KHz

 Specifications Of ETTA Advanced Digital Torque Indicators

 Range

5%~100% Capacity

Accuracy

± 0.3% @Readings

Selectable Units

N.m、N.cm、kgf.cm、lbf.ft、lbf.in

Display

160*128 dot matrix LCD(2.8 inch) with LED Backlight

Overload Capacity

120% F.S.

Measurement Mode

Track, Peak, First Peak,Auto Peak, Auto First Peak

Display Mode

Digital / Curve

Sampling Rate

Up to 2KHz

Memory

1000 data

Set Point

Programmable high and low limits

Battery Indicator

Display flashes battery icon when battery is low

Power

3.6VDC 800mAH Ni-Mh rechargeable batteries

Battery Life

Approx. 14 hours for continuous use

Charger

Universal USB/BM charger, Input:110~240VAC

Temperature Effects

<0.03% FS per °C

Communication

USB or RS-232

Software

Free software for USB communication

Outputs

RS-232, "Within" set point output， "Under or over" set point output

Operating environment

 Temperature: -10 to 40°C

Relative Humidity:  20 to 80%

Storage environment

 Temperature: -20 to +50°C

Relative Humidity:  5 to 90%

Accessories

AC adapter/charger, USB cable

Options

Mini-printer, Measuring Adapters, RS-232 Cable, EST-TT2 Torque Test Stand

 Model

Capacity/ Resolution

N.m

N.cm

kgf.cm

lbf.ft

lbf.in

Drill Chuck

ETTA1

1/0.0001

100/0.01

10/0.001

-

8.85/0.001

1~10 mm

ETTA5

5/0.0005

500/0.05

50/0.005

3.69/0.0005

44.3/0.005

ETTA10

10/0.001

1000/0.1

100/0.01

7.38/0.001

88.5/0.01

https://www.mikrometry.com/products/etipd-leeb-hardness-testing.html

Mikrometry hardness tester ETIPD is a kind of portable measuring tool; it can be quick, nondestructive, and high accuracy when measuring common metal materials hardness. It can be used in the laboratory, as well as the on-site engineering field. It is indispensable for material nondestructive hardness testing.

 Feature Of ETIPD Leeb Hardness Testing

Self-contained (Impact Device D integrated): no cables.

Integrated impact direction sensor.

Highly accurate (±4HL) in any impact direction (360°) – automatically.

Integrated display of results for all common hardness scales.

Large, high contrast LCD for optimum viewing in all conditions.

 Easy calibration.

Full USB communication with PC, software included free of charge.

The internal storage of data with day and time.

Battery: Rechargeable Li-ion, charges through the USB port.

Intelligent sleep mode.

Standards and Guidelines applied: DIN 50156 (2007), DGZfP Guideline MC 1 (2008), VDI / VDE Guideline 2616 Paper 1 (2002), ISO 18625 (2003), ASTM A956 (2006), GB/T 17394 (1998), JB/T 9378 (2001), JJG 747 (1999), CNAL T0299 (2008), JIS B7731 (2000).

 Printer: Wireless (Bluetooth) mini printer. 4

 Specification Of ETIPD Leeb Hardness Testing

 Accurate

±4 HLD

Units

HRC、HRB、HB、HV、HSD

Display

128*64 dot matrix LCD(1 inch) with backlight

Memory

500 data

Testing Direction

Automatic identification, no wiring required

Data Transmission

USB

Power

Built-in 110 mAh Li-ion Battery

Operating Environment

Temperature：-10~+40℃

Humidity：20%~85%

Storage Environment

Temperature：-30~+80℃

Humidity：5%~95%

Dimension

147* 35*22 mm

Weight

100g

Accessories

Hardness Tester, Test Block, Mini printer, Charger, USB Cable, Printer Charger Cable, Litter Support Ring, Cleaning Brush, Suitcase

Standard

https://www.mikrometry.com/products/

Since our founding in 2007, our products have proven themselves in numerous applications at companies in the automotive, machinery, electric product, film, medical device, textile, pharmaceutical, cosmetic, packaging, food, and many other industries. We also offer optimized solutions for special requirements.