Autel MaxiIM IM608 II IM608S II XP400Pro IMMO Key Programming OBD2 Scanner Car Diagnostic Tool IMMO Key PK IM508 IM508S IM608

4.7

3 Reviews

15 sales ౹ 45 cross-platform sales

$2,575.20 43% off $4,546.25

In this article, we will show you how to use Autel Maxi IM608 and XP400 key programmer to read EEPROM data in three different ways. These methods offer you flexibility and convenience for accessing EEPROM data. The three methods are:

Method 1: Reading with Autel XP400 Pro and APA103 (EEPROM Clamp)

Required Devices:

Maxi IM608 Tablet

XP400 Key Programmer

Autel APA 103 EEPROM Clamp

Programmer USB cable

Steps:

Prior to starting, it is advised to wear electrically insulated gloves.

Align the redline of the EEPROM Clamp with EEPROM pin #1.

Connect the other end of the APA103 EEPROM Clamp to XP400 Pro device.

Use the programmer USB cable to connect XP400 Pro and Autel IM608.

Method 2: Using APA002 EEPROM Socket

Required Devices:

Maxi IM608 Tablet

XP400 Pro Key Programmer

Autel APA002 EEPROM Socket

Programmer USB cable

EEPROM chip

Clip

Steps:

Identify the correct position corresponding to EEPROM pin #1.

Grab the clip with the clip and put it in the right spot of EEPROM Socket

Insert the APA002 EEPROM Socket into XP400 Pro.

Utilize the programmer USB cable to connect the XP400 Pro and Autel IM608.

Method 3: Employing APB129 EEPROM Adapter Shell

Required Devices:

Maxi IM608 Tablet

XP400 Pro Key Programmer

Autel APB129 EEPROM Adapter

Programmer USB cable

EEPROM chip

Clip

Welding tool

Notes: APB129 supports both 6-Pin and 8-Pin chips.

Steps:

Determine the correct position aligned with EEPROM pin #1.

Use a clip and a welding tool to attach the EEPROM chip securely onto the APB129 EEPROM Adapter.

Connect the APB129 EEPROM Adapter to the XP400 Pro device.

Establish a connection between the XP400 Pro and Autel IM608 using the programmer USB cable.

Reading EEPROM Data on IM608 Autel Tablet:

Navigate through the following menu path on IM608 tablet:

Programmer > Accept the disclaimer > Chip (EEPROM, MCU, ECU) > Chip read & write > EEPROM.

Choose the appropriate EEPROM type for your operation.

Autel MaxiIM IM508S Plus XP400 Pro All System Diagnostic

🚗 Unlock Your Car's Potential: Autel MaxiIM IM508S Plus XP400 Pro, built to handle all your immobilizer and key programming needs. With a powerful quad-core processor and an easy-to-use Android-based touchscreen tablet, it offers lightning-fast performance and a straightforward interface.

🔑 Master Key Programming: IM508S comes with the XP200 key programmer, providing exceptional service functions for immobilizer systems. Diagnose modules for a wide range of makes/ models, making it indispensable. Plus, it's packed with special functions, making it a versatile and powerful tool for both IMMO and diagnostic services.

💡 Highlights: ✅ Powerful RK3566 processor for enhanced performance. ✅ 7" 1024x600 LCD capacitive touchscreen for a clear display. ✅ Internal 64GB memory for data and software storage. ✅ Android Operating System for fast boot-up and multitasking. ✅ Expert Mode for advanced key learning options. ✅ OE-level diagnostics for over 80 US, Asian, and European makes and models. ✅ Support for active tests and complete special functions.

Customer Problem: I connect my XP400 Pro to the tablet, the green light is on, then I click the programming software in the main menu to enter, but the error "The programmer is disconnected" appears, what's the problem? How to fix it?

Solution: Try XP400Pro to connect PC software and check if it works. If you still get the same error, you need to contact your reseller for repair. Download the PC software from the link below: https://pro.autel.com/myAccount.html?userType=1