#key programmer

Learn how to quickly synchronize and clone original key data using the KEYDIY KD-X4, 13# Remote Chip Reading Adapter, and C29AX71 Smart Key. This method enables seamless key addition without complex on-board programming, making it ideal for water-damaged keys or vehicles with difficult learning procedures.

Thechip synchronization now supports the NCF29AX series, including NCF29A1, NCF29A4, NCF29A2, NCF2953, NCF29A3and NCF2954.

Required Tools & Preparation Ensure the following hardware and software are ready before proceeding: Main Devices: KEYDIY KDX4 or KD MAX. Specialized Key: KEYDIY C29AX71 Smart Key. Adapter: KEYDIY 13# Remote Chip Reading Adapter. Software: Update your KD App to the latest version before proceeding.

Note: This is not a simple read-and-copy procedure; some keys require chip removal and soldering. There is no need to generate a remote program before reading the original key data.

Step-by-Step Synchronization Guide 1. Extract the Original Chip Disassemble the original vehicle smart key and carefully remove the NCF29AX series chip.

2. Attach the Chip to the #13 Adapter Solder the chip onto the 13# Adapter and connect it to your KD-X4 or KD-MAX. Alternative Method: Follow the provided wiring diagram to solder wires directly to the keyboard to read and save data without removing the chip.

3. Synchronize via KD App Navigate to: Remote function >> Smart key clone >> Universal smart key synchronization>> Read Chip data. This process syncs the original chip’s remote data and key ID to the CAX and CA7 series.

4. Write to C29AX71 Smart Key ① Connect C29AX71 Smart Key to the KD-X4 using the 6-pin programming cable. ② Select "Generate dealer keys". ③ Once finished, snap the key shell onto the new hardware.

Final Results & Advantages The primary advantage of this method is efficiency. After writing the data, the new key works directly on the vehicle with no additional programming required. Always test both the new C29AX71 Smart Key and the original key to confirm all functions operate normally.

The new KEYDIY OBD Function Extension Cable is a dedicated hardware solution for Ford alarm reset (2015–2018) and All-Keys-Lost programming (2018–2022). Designed for stability and speed, this professional harness bypasses modern security hurdles and includes built-in interfaces to support future updates for Toyota and NIO vehicles.

Core Solutions Ford Specialist: Essential for Alarm Reset/Override (2015–2018) and All-Keys-Lost (2018+). EV Ready: Built-in interface for New Toyota and NIO vehicle matching. Third-Party Compatible: Works seamlessly with various diagnostic devices for New Energy Vehicles. Stable Power: Includes a 12V interface to prevent voltage drops during programming.

KEYDIY OBD Extension Cable Ford Support List Everest - Intelligent Key System - (2016-2019) Taurus - Intelligent Key System - (2016-2019) Raptor F-150 - Intelligent Key System - (2015-2017) Raptor F-150 - Intelligent Key System - (2017-2020) Raptor F-150 - Intelligent Key System - (2018-2019) Raptor F-250 - Intelligent Key System - (2016-2020) New Mondeo - Intelligent Key System - (2016-2020) Escape - Intelligent Key System - (2020) Edge - Intelligent Key System - (2016-2020) Explorer - Intelligent Key System - (2016-2020) Mustang - Intelligent Key System - (2016-2020) EcoSport - Intelligent Key System - (2018-2020) Ranger - Intelligent Key System - (2016-2020) EcoSport - Intelligent Key System - (2018-2022) EcoSport - Mechanical Key System - (2018-2022) Escape - Intelligent Key System - (2020-2022) Escape - Mechanical Key System - (2020-2022) Escort - Intelligent Key System - (2018-2022) Escort - Mechanical Key System - (2019-2022) Expedition - Intelligent Key System - (2020-2022) Explorer - Intelligent Key System - (2020-2022) New Focus - Mechanical Key System - (2018-2022) New Focus - Intelligent Key System - (2018-2022) Mustang - Intelligent Key System - (2020-2022)

Why Add This to Your Kit? 1. Skip the Workarounds: Directly bypass alarm locks on Ford systems. 2. Future-Proof: Support for upcoming NIO updates and Toyota protocols. 3. Reliability: High-quality connectors designed for heavy workshop use.

Upgrade your tool kit with KEYDIY. Professional tools for professional results.

KEYDIY PAK09 allows you to add up to 6 remote keys to your Mercedes-Benz, including a smartphone key with proximity functionality. Follow these clear steps to program your new key easily.

Watch Video Tutorial:

Step 1: Prepare the Hardware ① Remove the PCB from your original car key. ② Refer to the wiring diagram in the KDAPP (under Learning Center → Help Center → Wiring Diagram From Original Remotes) to solder the PCB correctly. ③ Connect the adapter cable to the trigger port, then place the PCB into the PAK09 case and close it. ④ Press the power button: short-press once, then long-press for 3 seconds until the indicator flashes.

Step 2: Generate Remote Program ① Place the new remote (KDB/ZB Universal Key) into the KD-X4 holder. ② Open KDAPP → Remote Function → Vehicle Remote→ Select the correct remote control → Generate → Wireless Generation. ③ Wait for "Generation Successful."

Step 3: Pair Key with Car ① In KDAPP, go to Settings → Device Management. ② Search and select your PAK09 kit. Enter default password: 000000 (change it on first use).

Step 4. Add Key ① Go to Settings → Key Management → Enter Matching Mode. ② Before the countdown ends, press any button on the new remote to add it. Confirmation will appear once added.

Final Step: Test the Key Check remote functions: lock, unlock, and proximity detection if using the phone key. Your Mercedes-Benz now supports up to 6 keys, including a convenient phone key.

The EONEBOSS TLK1 is a professional diagnostic tool specifically designed to reprogram and reactivate locked or accidentally deleted Toyota and Lexus keys. Using advanced technology, it enables direct matching of used keys—eliminating the need for an initial unlocking step. This streamlines key recycling, improves workflow efficiency, and lowers operating costs.

Step 1. Simulate Key Generation

Place the locked or deleted key into the TLK1 sensing area. Press the device button to begin reading. The TLK1 reads the key’s secure identifier (e.g., Key ID) and uses internal data to simulate a compatible key profile. What happens: The device captures the key’s secure identifier and generates a virtual key that can be recognized by the vehicle during programming.

Step 2. Match to Vehicle

Use the TLK1 as a temporary replacement key during the vehicle’s standard key programming procedure. Follow the specific key matching steps required by your Toyota/Lexus model. The TLK1 transmits the key ID and necessary credentials to the vehicle, while storing related data (such as passwords and system flags) internally. What happens: The vehicle recognizes the simulated key and registers the key ID into its immobilizer system as a new, valid key.

Step 3. Write-Back Operation

After the vehicle has accepted the simulated key and the TLK1 has retrieved all necessary data, place the original locked key back into the sensing area. Activate the write-back function on the TLK1. The device will write the completely restored key information to the original key. Wait for a visual or audible confirmation (e.g., LED indicator or prompt) that the process is complete. What happens: The original key receives the restored access credentials and is fully reactivated for normal use.

Final Confirmation – Test Key Functions

Once the write-back process is finished, remove the key from the TLK1 and test all remote and ignition functions—such as locking, unlocking, and starting the vehicle—to ensure everything operates correctly. The key programming is now complete.

For a limited time only, until October 9th, unlock incredible value with the KEYDIY KD-MP Five-in-One Promotion Package - the smart choice for automotive locksmiths, car key professionals, and DIY enthusiasts!

What’s Included in the KD-MP Promotion Package? This powerful package contains everything you need to program keys for a wide range of vehicles with ease and confidence: - KD-MP Complete Device Set × 1 - MLB08 Key (Non-OEM Solution) × 1 - MLB19 Key (OEM Solution) × 1 - MLB26 Key (OEM Solution) × 1 - KD-MATE Programmer × 1 - KD-MP PROGRAM KIT (Compatible with MQB/MLB platforms)

Exclusive Free Gift - Limited Time Only! Order now and receive FREE: 1 × High-Quality 12V Power Supply 5 × 1.8PF Capacitors

Perfect for ensuring smooth and stable performance during all your key programming sessions!

Why Choose the KEYDIY KD-MP Package? Wide Vehicle Coverage: Supports both OEM and non-OEM key solutions for popular platforms like MQB and MLB.

User-Friendly: Designed for professionals and beginners alike.

All-in-One Convenience: No need to purchase separate tools - everything is included in one budget-friendly bundle.

Reliable Performance: Trusted by automotive technicians worldwide.

Don’t Miss Out - Offer Ends October 9! This special promotion won't last long. Stock up now and elevate your key programming capabilities with KEYDIY's top-quality equipment.

Click to Order Yours Today & Secure Your Free Gift! Perfect for locksmiths, car garage owners, key makers, and automotive enthusiasts looking to expand their service offerings efficiently and affordably.

Grab your KEYDIY KD-MP Package now before this offer expires!

You may also like: KEYDIY Deal: FREE KD-X4 Tool with $1,500 KD Remote Purchase! http://blog.obd2shop.co.uk/keydiy-deal-free-kd-x4-tool-with-1500-kd-remote-purchase/

VAPON has released a major software update (Version 2.00) for its VP996 Key Programmer on July 21, 2025, expanding its capabilities for Suzuki and Honda vehicles. This update brings powerful new features, including PIN code reading and smart key programming, making the VP996 an even more versatile tool for automotive locksmiths and technicians.

Features of the Update 1. Suzuki Support (2018-2024 Models) PIN Code Reading Function - Now compatible with all Suzuki models from 2018 to 2024, allowing for seamless key programming without dealership dependency.

2. Honda Support (2022+ Models) 1) Smart Card System Programming - Full coverage for popular models like CR-V, XR-V, Accord, and Civic (2022 and newer).

2) All 2022+ Honda Models - Enhanced support for advanced smart key systems.

Why Choose the VP996 Key Programmer? No Internet Required - Works offline for faster, more reliable programming. Fast & Efficient - Reduces programming time, improving workflow efficiency. Free Future Updates - More enhancements are coming soon, ensuring long-term usability.

Conclusion The VAPON VP996 continues to set the standard in automotive key programming with this latest update. Whether you're working on Suzuki or Honda vehicles, this tool delivers speed, convenience, and expanded functionality - all without needing an internet connection.

Stay tuned for more updates, and upgrade your VP996 today to take advantage of these powerful new features!

Mercedes-Benz models 204, 207, and 212 may experience steering lock (ESL/ELV) failures, causing no-start issues. This guide outlines two replacement methods, with Method 2 (direct data calculation and writing it into ELV by APPRO2 APP2) recommended for safety.

Replacement Methods Method 1: Erase & Synchronize Lock Data Steps: 1. Retrieve the key code. 2. Save the original lock EIS data (includes key password). 3. Erase the lock data and clear TP protection. 4. Write back the saved EIS data to the new lock. 5. Synchronize data to the steering lock (ESL). 6. Insert the working key to activate.

Disadvantage: Risk of lock damage if data erasure fails.

Method 2: Direct Data Calculation (Recommended) Steps: 1. Retrieve the key code. 2. Save the original EIS data (includes key password). 3. Upload EIS data to the server to calculate ESL sync data. 4. Erase the new steering lock and clear TP protection. 5. Write the calculated ESL data to the lock. 6. Insert the working key to activate.

Advantage: Safer, avoids lock damage from erasure.

Notes 1. Blank Lock Requirement: Ensure the new steering lock is erased and writable before synchronization. 2. Lock Status: Verify "Initialized,""Personalized," and "Activated" flags in the tool interface.

Simulator Use: Simulators must be erased before reuse. Check stored passwords to confirm successful personalization.

here is a guide on how to add smart key for 2022 Cherry Tiggo 8 Plus by Lonsdor K518 Pro All-In-One Key Programmer