#thrift-store

Skip the furniture-store sticker shock. Instead go thrifting to find sturdily built furniture with character. Our instructions and tips make it easy to give new life to an old bookshelf that needed just a bit of freshening up.

By Camille Styles, HGTV.com; Photos by Molly Winters

What You’ll Need

A screw driver or drill; pry bar; handheld vacuum cleaner; several microfiber cloths and a bucket full of water; orbital sander with sandpaper pads ranging from 150-grit to 400-grit; loose sheets of sandpaper ranging from 150-grit to 400-grit; gel stain; bristle brush; ketchup (yes really!); and temporary wallpaper.

Source: Yahoo Makers

What to Look For

When it comes to choosing an antique to refinish, there are a few key things to keep in mind. First, look for a piece that has a shape you love, and that’s made of solid, good quality wood — no veneers. Then, ensure that the piece is structurally sound. Refinishing the exterior of a large piece of furniture is one thing, but completely rehabilitating it is another. For beginners, a solid, sturdy antique is ideal for a cosmetic makeover. Think you’ve found just the one? Inquire about its history, and smell it to ensure you’re not bringing the stench of mothballs or mildew into your home. Tip: Don’t hesitate to consult with a professional. We had our friends at Hunter Wagner Designs inspect this piece before purchasing, and they informed us that the piece was made with quarter-sawn oak, making it more stable and resistant against warping. After that, our decision was made.

Source: Yahoo Makers

Fully Disassemble the Piece

Start by removing all doors, drawers and shelves. Use a drill or screwdriver to remove all hardware (hinges, latches or knobs), and a pry bar to to remove crown molding if possible. Set hardware to the side, and lay out all other parts flat in your workspace.

Source: Yahoo Makers

Clean Everything

Use a handheld vacuum cleaner to clean out cobwebs, dust and dirt. Then use a damp towel to wipe down all surfaces (including any removed doors, drawers or crown molding). Allow all pieces to fully dry.

Source: Yahoo Makers

Sand Larger Areas

An electric orbital sander is extremely helpful when it comes to sanding down large, flat areas. Begin with a coarser 150-grit sandpaper — always moving with the grain —  to get through any polyurethane, then continue sanding with 300- to 400-grit sandpaper until smooth.

Source: Yahoo Makers

Sand Any Detailing

For smaller, harder-to-reach areas like crown molding and corners, sand using loose sheets of sandpaper. Again, begin with a coarser grit and end with a fine grit until all polyurethane has been sanded off. Tip: Sanding is the the most time-intensive and messiest part, so be patient, take breaks, and work in a space that has plenty of ventilation.

Source: Yahoo Makers

Wipe Clean

Ensure that all sanding residue is removed by wiping your whole piece down with a damp microfiber cloth. Allow to dry completely.

Source: Yahoo Makers

Apply Stain

Begin the staining process by working in a less-conspicuous area of your piece, especially if you’ve never worked with a wood stain before. Use a bristle brush to apply a generous amount of gel stain to the wood, then continue brushing with the grain to evenly distribute the stain. Note: If you’ve chosen to paint your antique instead of staining it, this is the time to prime and paint the wood.

Source: Yahoo Makers

Wipe Stain

Use a staining pad or microfiber cloth to wipe away excess stain, moving with the grain. Repeat this step and the previous step until the entire piece, including its removed parts, has received a solid coat of stain. Following manufacturers’ instructions, allow stain to dry completely. On Choosing a Stain: We recommend gel stains because of their ease of use, and they produce a lustrous, hand-rubbed finish. The gel consistency minimizes drips and the thickness ensures even coverage throughout — meaning your sanding doesn’t have to be as precise as it would need to be with a thinner, less-forgiving stain. We used General Finishes’ Gel Stain in Candlelight to closely match the original color of the bookcase. 

Source: Yahoo Makers

Polish Hardware

Chances are, the metal hardware on your antique is rusted or tarnished. Our trick to getting them shiny as new? Classic store-bought ketchup. To use it, completely cover all hardware with ketchup and allow to sit for 15-30 minutes, then scrub with a sponge under warm running water, and allow to dry completely.

Source: Yahoo Makers

Add a Pop of Pattern

If you want to keep your antique as close-to-the-original as possible, but still want to give it some flair, temporary wallpaper is a great solution. Simply peel the backing, then adhere the wallpaper to the bookcase’s back panel.

Source: Yahoo Makers

Make Your Piece Functional

Feel like your piece would work better for you if it only had that one thing? Now’s the time to add casters, custom shelves, a keyed lock, a marble top, or anything else that improves your piece’s functionality. And don’t hesitate to enlist the help of a professional! Our friends at Hunter Wagner Designs built these custom shelves better than we ever could have.

Source: Yahoo Makers

Reattach All Parts

Reassemble your piece. We reattached the crown molding with a nail gun, then screwed the hardware back in place and mounted the cabinet doors. Fill the piece with all your favorite belongings, then enjoy your hard work for years to come.