A tomato is a solar-powered sugar factory. For the first month or so, all of the sugar it produces is directed toward new leaf growth. During this stage, tomato plants grow very rapidly, doubling their size every 12 to 15 days. Eventually, the plants make more sugar than the single growing tip can use, which signals the plant to make new branches and to flower. This usually happens after 10 to 13 leaves have expanded, at which time the plant is 12 to 18 inches tall. In the next few weeks, the entire character of the tomato plant changes. If unsupported, the increasing weight of filling fruit and multiple side branches forces the plant to lie on the ground. Once the main stem is horizontal, there is an increased tendency to branch. Left to its own devices, a vigorous indeterminate tomato plant can easily cover a 4-foot by 4-foot area with as many as 10 stems, each 3 to 5 feet long. By season’s end, it will be an unsightly, impenetrable, disease-wracked tangle.
A properly pruned and supported single-stem tomato plant presents all of its leaves to the sun. Most of the sugar produced is directed to the developing fruit, since the only competition is a single growing tip. The result is large fruits that are steadily produced until frost. In general, more stems means more but smaller fruits, which are produced increasingly later in the season. (This is much less applicable to determinate plants, due to their shortened growing season and better-defined fruiting period. Therefore, determinate plants require little pruning. See “Indeterminate vs. Determinate,” below.) With tomatoes, we want to maximize the efficiency of photosynthesis and minimize the risk of disease. This is best accomplished by ensuring that each leaf has plenty of room and is supported up off the ground. A pruned and staked plant will produce larger fruit two to three weeks earlier than a prostrate one.
RULE 1: Get plants off the ground.
RULE 2: Give plants room.
RULE 3: Never prune or tie plants when the leaves are wet.
Pruning also affects plant health. The leaves of a pruned and supported plant dry off faster, so bacterial and fungal pathogens have less opportunity to spread. Soil is less liable to splash up onto staked plants. The bottom line: Upright plants have fewer problems with leaf spots and fruit rots because their leaves stay drier and free from pathogen-laden soil.
The way you choose to train and prune your tomato plants will affect how you space your plants, as well as the best method of support . There’s no one right way to do it. Instead there are a few good patterns to follow.
Side stems affect plant vigor
As a tomato grows, side shoots, or suckers, form in the crotches, or axils, between the leaves and the main stem. If left alone, these suckers will grow just like the main stem, producing flowers and fruit.
Suckers appear sequentially, from the bottom of the plant up. The farther up on the plant a sucker develops, the weaker it is, because the sugar concentration gets lower as you move up the plant. On the other hand, side stems arising from below the first flower cluster, although stronger, compromise the strength of the main stem. For a multi-stemmed plant, your aim is to have all stems roughly the same size, although the main stem should always be stronger, because it has to feed the entire plant for the next five or six months. Here’s how I achieve this.
I keep tomatoes free of side stems below the first fruit cluster. When trained to one vine and left free-standing, tomato plants develop strong main stems. To encourage a strong stem, I trim all suckers and I don’t tie plants to their supports until the first flowers appear.
Determinate tomatoes need no pruning other than removing all suckers below the first flower cluster, because pruning won’t affect their fruit size or plant vigor. If you do any pruning at all above the first flower cluster on determinate tomatoes, you’ll only be throwing away potential fruit.
Indeterminate tomatoes can have from one to many stems, although four is the most I’d recommend. The fewer the stems, the fewer but larger the fruits, and the less room the plant needs in the garden. For a multi-stemmed plant, let a second stem grow from the first node above the first fruit. Allow a third stem to develop from the second node above the first set fruit, and so forth. Keeping the branching as close to the first fruit as possible means those side stems will be vigorous but will not overpower the main stem.
Indeterminate vs. determinate
Indeterminate tomato plants continue to grow, limited only by the length of the season. These plants produce stems, leaves, and fruit as long as they are alive.
Determinate tomato plants have a predetermined number of stems, leaves, and flowers hardwired into their genetic structure. The development of these plants follows a well-defined pattern. First, there is an initial vegetative stage during which all the stems, most of the leaves, and a few fruit are formed. This is followed by a flush of flowering and final leaf expansion. Finally, during the fruit-fill stage, there is no further vegetative growth. As the tomato fruits ripen, the leaves senesce and die. Commercial growers favor this type of tomato because all the fruit can be mechanically harvested at once. The major advantage of planting determinate plants in a home garden is early harvest.
Semi-determinate plants, as the name implies, are somewhere between these two other types. Although there aren’t many semi-determinate tomatoes, one of the most popular hybrids, ‘Celebrity’, falls into this category. I think semi-determinates are best grown to three or four stems.
Simple vs. Missouri pruning
In Missouri pruning, you pinch out just the tip of the sucker, letting one or two leaves remain. The advantage is that the plant has more leaf area for photosynthesis and to protect developing fruit from sun-scald. The disadvantage is that new suckers inevitably develop along the side stems, adding to your future pruning chores.There are two ways to deal with a sucker that isn’t destined to become a stem. The simplest is to pinch it off entirely; not surprisingly, this is called “simple pruning.” This should be done when the sucker is still small and succulent. Grab the base of it between your thumb and index finger and bend it back and forth. The sucker should snap off, producing a small wound that will heal quickly. Avoid cutting the sucker with a knife or scissors, because the resulting stump can become easily infected. Once a sucker becomes too tough and leathery to snap off, however, you’ll have to use a blade. I recommend a retractable razor knife.
Missouri pruning is necessary when things have gotten out of hand. When you’re dealing with large suckers, it’s better to pinch off just the tip than to cut off the whole thing close to the main stem. For one thing, if disease hits, it’s farther away from the main stem. And for another, removing just the growing tip is less of a shock to the plant than removing a foot or so of side stem.
Suckers grow very quickly during the hot summer months. This is indeed a situation that tests one’s resolve. It helps to know that side stems started this late in the season will always be spindly and produce inferior fruit. You must be heartless and tip them all.
A final pruning pays off
About 30 days before the first frost, there is one last pruning chore: The plants must be topped. The fruit that has set must be given every opportunity to mature. Removing all the growing tips directs all sugar produced by the plant to the fruit. This can be hard to do, as every gardener is reluctant to admit the season is coming to an end. However, this final pruning can make all the difference between hard, green fruits, hurriedly picked before frost, which later rot in a paper bag, and ripe, home-grown tomatoes in your Thanksgiving salad. Be tough, fight your nurturing instincts, and top those plants.
Supporting your tomatoes
Cages work for plants with three to five stems. I use them almost exclusively for determinate tomatoes. Ready-made tomato cages are too little for all but the smallest determinate cultivars. My ideal tomato cage is made from 5-foot-tall galvanized fencing with openings at least 4 inches square, so I can reach in and pick the fruit. A 4-foot section makes a cylinder about 15 inches in diameter. Secure it with baling wire, and stabilize it with two stakes, one of which is at least 6 feet long. Drive the stakes in within a week of planting, but wait to set cages over the plants until the first fruits form, to simplify weeding and pruning. Space caged plants about two-thirds of their final height in all directions.
Use the same type of fencing to make a tomato fence, which works best for plants with one or two stems. To get a good, solid fence, you need a helper. Secure the fencing with 6-foot stakes every 4 feet. Here’s how I keep the fence taut. Loop each non-end stake through the bottom rung of the fence, then start to drive it into the ground so its bottom is angled away from the previous stake. Once it’s about 4 inches into the ground, bring the stake upright and drive it in the rest of the way. Set single-stemmed plants 18 inches apart, and double-stemmed plants 24 inches apart. If you stagger the planting (successive plants on opposite sides of the fence), you can knock 6 inches off these distances. Erect the fence before you plant your tomatoes.
Stakes work well for plants of one to four stems. I use 1-inch by 1-inch by 6-foot lengths of untreated oak or cedar, sharpened on one end. Drive the stakes 8 to 12 inches into the ground, depending on your soil (deeper for loose, sandy ground). To avoid damaging roots, drive your stakes in within a week of planting. Space staked plants at 18 inches for a single stem, 24 inches for two stems, and 36 inches for three or four stems.
How to tie a tomato
There are two types of ties. Training ties direct plant growth upwards, and supporting ties keep it there. The top foot of a tomato stem, or leader, is very succulent and easily snapped; it needs to be directed upwards, gently. I wrap a short piece of twine around the middle of the leader, cross it over on itself, and loosely tie it to the support. The resulting figure-eight tie reduces the chance the tender stem will rub against the support and get bruised. Once flowering commences, all tomato vines must be tied to their supports. Although vigorous, the plants are also easily damaged, so take care in how you tie them and what you use. Cloth strips work well as long as they’re not too old and threadbare. Pieces of panty hose cause the least damage to plants, but they’re not biodegradable. Twine should be at least 1/8 inch thick, or else it can cut into the tomato stems.
Fruit will form along this stem. If left to the devices of the loose training ties, the weight of the fruit will pull the ties down the stake. Eventually, the stem will bend over and crease. Luckily, as the stem matures, it toughens; by the time fruit develops, the stem can tolerate a tighter tie. To support a fruit cluster as it fills and gains weight, I loop a longer piece of twine, 12 to 18 inches, around the stem just above the fruit cluster, creating a sling. Then I gently pull it up to take the weight off the stem. I wrap the twine twice around the stake, and firmly tie it to the stake 6 to 10 inches higher than the point of attachment to the vine. To keep the tie from slipping, I knot it underneath the point where the sling meets the stake.
Anya is live and ready to show you everything. Watch her strip, dance, and perform exclusive shows just for you. Interact in real-time and make your fantasies come true.
✓ Live Streaming✓ Interactive Chat✓ Private Shows✓ HD Quality✓ Free Actions
Free to watch • No registration required • HD streaming
It started with a Google search on how to prune tomatoes. Attending to the tomatoes was high on my garden list but was pushed down a notch when fifteen pounds of beets needed to be harvested so the butternut squash starts could go in the ground. You know how that goes. So I was late to the task of initial pruning.
Though I’ve been growing tomatoes for decades, reviewing the basics can be useful. Some of the stems that had to go were larger than I felt comfortable snapping off. Several of my “go to” websites provided helpful tips. For example, the suggested side to side snapping proved preferable to up and down in order to prevent damage to the main stem.
After pruning was complete i tied the main stem to the stake with twine. As the tomato plant gets taller I’ll allow some branching which the cage will support.
The Tomato Dirt website, in a 5-minute read, gives the rationale for pruning tomatoes and the basics.
Pruning tomato plants: how and when to do it
If you have a little more time check the Harvest to Table post
How to Prune a Tomato
The author, Steve Alpert first offers six reasons to prune tomatoes;
To grow more flavorful tomatoes.
To grow larger tomatoes.
To grow more tomatoes over the length of a season.
To keep plant leaves and fruits off the ground and away from pests, insect damage, and fungal disease.
To keep plants smaller and more compact.
To allow tomatoes on the plant at the end of the season to ripen before the first frost.
Both Tomato Dirt and Harvest to Table have many other links and posts on growing tomatoes that are worth exploring.
Hilled the potatoes a second time. They've grown very fast since the first time I did this.
Today's big project was tomato supports & pruning. I drove in fence posts at the ends of each tomato row and wove twine along the plants (Florida weave method). Most rows got one level, and I'll add more as they get taller. One row had plants already big enough to need two heights of twine.
I should have done this earlier, as usual, but it worked out ok anyway.
In the second pic above, the left row (which is also there one with the biggest, unruliest plants) has not been supported or pruned yet. The right row, and the following pics, show the "after". I'm pruning off the bottom leaves, up as far as the first fruit/flower cluster, to increase airflow. This is meant to help with fungal diseases. I'm also removing suckers, damaged or yellowing leaves, and any branch growth that will create a crowded or difficult to manage plant shape.
I didn't take off any branches that had yet produced flowers, so I shouldn't be reducing fruit production, but rather encouraging it, instead of excessive foliage growth. I did take a lot off some of the plants, though, so they'll get a while to recover before I do anything else to them.
I have like 28 tomato plants! I hope I get a lot of tomatoes!
Anya is live and ready to show you everything. Watch her strip, dance, and perform exclusive shows just for you. Interact in real-time and make your fantasies come true.
✓ Live Streaming✓ Interactive Chat✓ Private Shows✓ HD Quality✓ Free Actions
Free to watch • No registration required • HD streaming
Spring is still a little ways away, but it's never too early to start planning your garden. Tomatoes are one of the most popular vegetables gardeners grow every year. Tomatoes are easy to grow, but easy to mess up if you don't know what you're doing. Left alone to grow as they please - tomato Read more at http://freedomprepper.com/food-production/this-is-why-you-need-to-be-pruning-your-tomatoes/
Container tomatoes a need suckers kept under control
Gardening on a small acreage is a bit different than gardening in two-foot by two-foot container. When you have unwieldy plants in a large garden, it is easy to just let them grow naturally and not give a second thought to the suckers multiplying off the main stem. On the other hand, if your plant is growing in a container, small suckers left…
There are a lot of good reasons to prune your tomato plants. Leaves that are too shaded will not produce as much sugar for the tomato. A well pruned and staked tomato plant will bear larger fruit two to three weeks earlier than a non pruned plant. For the original post and pruning tips click HERE.
