#other tip

New sewing pattern <Kikyo> 3-in-1 Jacket

A new item is just released from Waffle Patterns. Meet the 3-in-1 Jacket <Kikyo> sewing pattern. This is a set of 3 items; an outdoor style jacket + zip-in/zip-out removable hood + zip-in/zip-out removable liner. Convenient and fun utility item for your trip, outdoor activity or daily use for all seasons!

You can make only an unlined utility jacket or a full set of items.

<design options>

-Jacket The jacket is unlined with a zipper+button opening. There are a lot of functional pockets. Please mix and combine the pocket designs as your usage.

The waist pockets have 2 kinds of hand-warmer layer designs. One is easy to sew patch type, and one is a welt type. The chest pocket designs are 2 types, too; flap+patch or zipper type.

My personal favourite is the zipper pocket on the chest and the sleeve pocket. I find they are very handy. I always put important things here like keyholders.

There are other functional details like a back belt, sleeve pleats, or shoulder tabs. You can skip some details.

The fit is loose-regular for room of the removable liner.

-Removable Liner The liner is zip-in / zip-out type. You can attach it to the shell at the front facing with zippers supported by small buttons and elastic loops.

It has a pocket and you can use as an inside pocket.

Of course, you can skip the liner. But it is very fun to add! And pretty easy to sew compared to the shell.

Btw, it is not really impossible to wear this liner as a jacket, especially if you make both inside and out clean. But the front area of the fitting goes off, so I do not recommend it officially.

-Removable Hood The zip-in / zip-out removable hood is lined and has a front button opening. You can attach it to the shell at the neckline on the collar by a zipper. The zipper is attached to the inside of the hood, so the hood layer comes outside of the garment. I found it is functional because when it rains, the rainwater should not sit between the layer of the Collar and hood. It has a string, but you can skip this.

Please make your creative style by mixing your favourite details!

<fabric recommendation>

<Shell> The pattern is drafted for woven fabrics. Light to medium weight durable but not too stiff woven jacket fabrics are recommended. like denim, gabardine, twill, canvas, etc.

Please consider the fabric with some body because it has to support the removable liner.

If your fabric is very thick/stiff, please consider using other lighter fabrics partly to avoid the thick layers, like pocket flaps or layered pocket parts.

Please choose a suitable one for your design intention and how you want to wear it. I strongly recommend checking with actual samples.

<Lining for shell> The hood and the pocket bags use lining fabric. Normal lining fabrics like plain cotton or acetate will work, but functional ones like quilted or faux fur will be fun, too.

<Removable liner> The liner constructed from; -Lining fabric(outside) -Thermal lining fabric (inside when you wear)

-Lining fabric(outside) Light weight lining fabric with a smooth texture will work like plain cotton or acetate etc.

-Thermal lining fabric (inside when you wear) Consider fabric like thin quilt, light weight fleece, flannel, or light faux fur, etc.

I recommend avoiding too heavy fabrics which cannot be supported by the shell. I made one with boiled wool. It is very warm but a bit heavy. A thick quilt may be too much volume. If you want to go with a volumy liner, maybe going 1-2 size up is a better idea.

For flannel and fleece versions, I used slippery fabric for the sleeve parts of the inside liner for comfort, but maybe no need to do that depending on your intention. If you use thick or fluffy fabric and worry about comfort about this part, please remember slippery fabrics are a safer choice.

<Sample fabrics in the photos> Here is a fabric list I used for the samples. I could not get all the shops which I bought from because some are too old or from wholesalers.

- Brick orange x plaid Shell ; cotton mixed twill Liner (thermal inside) ; wool mixed flannel Liner (outside) ; plain cotton lining

- Yellow sample Shell ; light weight water repellent outdoor fabric (from kniphal.nl) I think it is not for garments originally, but not very thick so it still worked. Liner (thermal inside) ; thin pre-quilted (thin insulation like under 80g backed with satin) Liner (outside) ; plain cotton lining

- khaki sample Shell ; cotton mixed twill (from nnstoffen.nl) Liner (thermal inside) ; light fleece (from nnstoffen.nl) Liner (outside) ; plain cotton lining

The fabric choice all depends on your design intention and how you want to wear it. I strongly recommend checking with actual samples as much as possible. Also researching store bought jackets will help your ideas.

<Size>

The fitting is loose-regular. I made just size for the yellow and khaki, but the orange one is one size smaller because the liner is thinner. I strongly recommend making a muslin for perfect fit. Some of my testers made 1 size larger with a mid-weight liner. If you use very fluffy volumy liner or want to wear thick sweater underneath, maybe considering 1-2 size larger is a good idea.

<Other materials>

-Zipper for attaching the liner I used general width (about 28mm) plastic teeth zippers. Because 2 zipper tapes come on the R-side facing(see the 1st photo), wide type zippers are not suitable.

-Zipper for attaching the hood This part is curved, so should be flexible. I used plastic teeth type and have no problem. Maybe some coil types are more flexible. But, I avoided coil type because I broke them often for some reason (maybe only me?)

Also, this jacket comes with many zipper tapes, I prefer plastic type because of the light weight.

-Other I attached the tabs on the pocket flaps. Those are pieces of folded twill tape(keperband).

<Other>

-Because the jacket is unlined, I finished the most seams with flat fell seam. If you do this, maybe it is better to add extra 2-3mm to the seam allowance. Some parts are not suitable for flat fell finish like bulky parts or armholes. I used bias tapes for armholes, and serger for bulky parts(like front yoke with flap).

-If you do not like visible zipper tapes, you can add twill tape or folded strips of shell fabric over the zipper tape.

-Some store bought jackets with a zip-on hood use a placket over the zipper. I think it is suitable if your fabric is thin. (I tried one and find too bulky)

********************* The sewing pattern includes 18 pages of instructions and all the sewing processes are described with detailed illustrations. The pattern files are available for both home printers (A4 or US letter) and copyshop(A0 format).

You can check other photos of this model on my Flickr page.

The 3-in-1 Jacket -Kikyo- (size 32 - 54) PDF sewing pattern is available here. Also in the Etsy shop.

Special discount price until 14th Oct. 2024 (CEST) with other popular patterns. No discount code is needed! The sale page is here.

*****  Special offer for Paper pattern and free shipping Paper pattern + PDF option is available limited time. *The paper includes only the pattern, please print out the instruction by yourself or read it with your tablet or PC.  The PDF + Paper listing page is here.

Enjoy your sewing!

(Japanese post here 日本語ポストはこちら).

**********************

Meet new sewing pattern <Komugi> Over shirt

A new item is just published from Waffle Patterns. Meet Over shirt <Komugi> sewing pattern, a work wear style over shirt with many functional pockets. Depending on your fabric and design choice, it will be a work shirt, uniform-like service shirt or outdoor style shirt jacket. You can make just a simple shirt as well.

<design options>

View A features a hidden button stand front opening + patch side pockets + an inside pocket. The patch side pockets are 2 types ; side opening or layered type. The cuff is no-opening design.

View B has a normal button stand + seam pocket + back bent and cuff opening.

The chest pocket design has 2 options, layer type or zipper pocket.

View A is intended as non-scratch design suitable for a work shirt especially if you are working on fragile things. View B can be made as a more outdoor-like shirt jacket with details like cuff openings or a vent. But of course you can choose and mix the options as you like!

The khaki sample in the photos features viewA, and the red plaid one is view B. The caramel brown one has mixed features.

My favourite feature is the sleeve patches. Adding compliment textures/colours is really fun! But you can sew without them, too.

Please make your creative style by mixing your favourite details.

<fabric recommendation>

The pattern is drafted for woven fabrics. Light-medium weight durable shirt fabrics are recommended. like corduroy, duck, twill, denim, linen, flannel, light wool or canvas etc.

It is not impossible to use very light drapery fabric, but those are not suitable for some details like patch pockets or vent.

Also, some very thick/stiff fabrics might not work well for details like pockets with facing. In that case, please consider using other lighter fabrics partly like the inside yoke, facing, or pocket parts.

Please choose a suitable one for your design intension.

For the caramel brown sample in the photos, I used cotton canvas. Suitable for work shirts and very easy to handle. The contrast fabric used for the sleeve patch and pocket layer is faux suede.

If you want very durable patches, leather or rubber-mixed fabrics are used for professional work apparel. But for general daily usage, like mine, design oriented choice like nice compliment colours or textures will be enough. Using leftover or old clothes is a fun choice, too.

The khaki sample is cotton ripstop. This one is also very suitable for work wear. The patch part is mixed twill.

The red plaid one is light wool backed fleece. I backed all the pieces with fleece except the folded parts like pocket openings or hem.

I bought all those fabrics from my local fabric market, but most of them are from years ago. I wanted to share where I bought them, but I actually forgot all.

I think light water repellent or windproof fabrics are nice functional options, too.

<Size>

The shirt is drafted regular fit.

I made on size bigger the red plaid sample because I wanted to wear this as a jacket. Also because the fabric gets thicker with fleece backing.

The caramel brown and khaki samples were made with just fit size.

<Other material>

If you attach the hidden button stand design, it is better to use flat and thin buttons for clean look opening.

*********************

The sewing pattern includes 18 pages of instructions and all the sewing processes are described with detailed illustrations. The pattern files are available for both home printers (A4 or US letter) and copyshop(A0 format).

You can check other photos of this model on my Flickr page.

The over shirt -Komugi- (size 32 - 54) PDF sewing pattern is available here. Also in the Etsy shop.

Special discount price until 13th Mar 2024 (CET) with other popular patterns. No discount code is needed! The sale page is here.

*****  Special offer for Paper pattern and free shipping Paper pattern + PDF option is available limited time. *The paper includes only the pattern, please print out the instruction by yourself or read it with your tablet or PC.  The PDF + Paper listing page is here.

Enjoy your sewing!

(Japanese post here 日本語ポストはこちら).

**********************

Meet new sewing pattern <Kanoko> Tote bag set

Meet the new item from Waffle Patterns Tote bag set <Kanoko> sewing pattern. This is a fun and functional tote bag 3 sisters set with many pockets. All sizes are perfect for daily use. Please make your favourite size with your favourite fabric. Those can be made with a relatively small amount of fabric, so, it is also nice to use your leftover fabrics from your stash.

<design options>

3 sizes are available; L - grocery size, M - commuter size, and S - accessory size. The grocery size is quite large and enough for supermarket or fabric shopping. The commuter size is suitable for daily use and the size for about 10″ iPad and other small things like a make-up pouch, wallet, or snacks. The accessory size is a very cute mini size for small staffs like a lip balm or candy.

L and M are basically the same design. Both have large 3D-shaped pockets on the front, side pockets with pleats, and a small pocket on the back. There are 2 kinds of functional inside pockets, too. There are 2 options for the opening. The L size sample shows magnet fastener + strap + side release buckle opening. The M sample features a zipper opening. You can add a shoulder strap on M size.

S size has also front/back and side pockets and a very small inside pocket. The closure is a magnet/snap fastener and an inside closure with tape+button.

<fabric recommendation>

The pattern is drafted for woven fabrics. Mid-heavy weight woven durable fabrics are suitable. like duck, twill, denim, linen, canvas or décor weight fabric etc. I think waxed fabrics or water repellent outdoor fabrics are great options, too. For the lining, plain cotton or linen will be a good option.

Depending on your fabric and your design intention, please consider using additional interfacing on the bag panels for adding extra strength or body.

Here are my sample’s materials.

The shell fabric of smoky pink samples is mixed twill. I wanted to add body on M size, so I used woven mid weight interfacing on bag panels. For L size, I only use interfacing on the facing parts to keep it light weight. I also made a sample of M size with mid weight denim + fusible fleece combo for stable shape.

The red and yellow plaid set are made with wool coating. Those are all leftover of my winter projects. I used woven interfacing on the panels on the M size. The lining is plain cotton.

Again, please consider the material combination depending on your fabric and design intention.

<other materials>

The samples are using 30mm~40mm webbing for the handles and straps. If you cannot find perfect colour or width, making those with contrast fabrics are the option.

I used the shoulder strap from ready made bags, but you can make them by yourself, too.

For additional strength, I added the plastic plates on the base of M and S size. The special materials for the bag base are sold at notion stores, but I used plastic plate cutting from old clear files and ice cream package.

Please choose suitable materials/parts for your design and shell fabrics. I strongly recommend checking actual material samples as much as possible and experimenting your fabrics before start the project.

<other>

For smoky pink samples, I used twill tape on the pocket opening of side and back pockets for strengthen and as a design accent. It is also good option if your fabric is too stiff or thick.

********************* The sewing pattern includes 17 pages of instructions and all the sewing processes are described with detailed illustrations. The pattern files are available for both home printers (A4 or US letter) and copyshop(A0/A1 format).

You can check other photos of this model on my Flickr page.

The Tote bag set -Kanoko- (3 sizes) PDF sewing pattern is available here. Also in the Etsy shop.

Special discount price until 13th June 2023 (CEST) with other popular patterns. No discount code is needed! The sale page is here.

*****  Special offer +17.5EUR for Paper pattern and free shipping Paper pattern + PDF option is available with plus 17.5EUR. *The paper includes only the pattern, please print out the instructions by yourself or read it with your tablet or PC.  The PDF + Paper listing page is here.

Enjoy your sewing!

(Japanese post here 日本語ポストはこちら).

**********************

Meet new sewing pattern <Kaede> Utility apron / Tool belt

A new item is just released from Waffle Patterns. Meet Utility apron / Tool belt <Kaede> sewing pattern. You can choose a bib apron type or tool belt with many useful pockets and functional parts!

Please freely mix and combine the design options as you like and make functional gear for sewists, gardeners, carpenters, makeup artists, florists, or all cool creative workers!

<Design options>

View A is an apron type with a bib and the apron is slightly longer than View B. The bib pocket has a layer and pen holder. There is a large layered pocket on the center of the apron and useful cargo pockets, zipper pockets, and hanger loops are on the side parts.

View B is a tool belt type with belt loops, and slightly shorter than View A. The center pocket has one more layer for the artist tool pocket where we can store brushes, seam rippers, or any other stick-shaped equipment. It features belt loops&belt. you can make a belt for this or use a belt you already have. Also, it can be changed to View A type of belt.

My personal favourite is the detachable tool pocket. If you want to make this, please attach the hunger loop or belt loops/belt for attaching it.

Please mix and match the options for your design intention and materials.

<fabric recommendation>

The pattern is drafted for woven fabrics. Mid-heavy weight durable fabrics like duck, twill, denim, linen, or canvas will be suitable.

Some very thick/stiff fabrics might not be suitable for details like double folded edge or flap etc, because of the thickness of fabric layers. Please consider proper finishes for your material or try to use a contrast fabric for some parts.

I partly used folded nylon tape instead of the double folded pocket opening edges on the sample. Depending on the fabric, maybe this is a good option for the hem, too. Also, I used a contrast fabric for the facing on the gray sample and skip interfacing on some parts, because the shell is quite stiff.

The salmon pink sample was made with mid-weight cotton duck, I made other workwear series with this like Anzu or Azuki. I bought it at local traveling fabric market years ago. Since the construction is like chambray or dungaree, similar fabrics may be found in coloured denim section.

The gray sample is a teflon-coated outdoor fabric. It’s a bit stiff for clothing but perfect for this item. This fabric is also from my local fabric market years ago.

I want to make another one with oil clothes, raw denim or nylon ripstop if I can find nice fabric.

<Other material>

The samples are using durable webbing tape for the belt and neck straps etc. Those tapes and parts like adjusters are sometimes found in bag making material section at stores. If you cannot find perfect materials, make the tape from a shell or contrast fabric of the same width.

<Size>

3 sizes XS/S, M/L, and XL/XXL are available. As for choosing your size, I recommend referring to the finishing measurement, too. I think some people like to use a tool belt of a smaller size. In that case, please choose a smaller size, then adjust the length of the belt and neck strap to fit your body. If you use the apron over jackets or outers, a larger size will be the option. Since the pattern is quite flat, those are suitable for men, too. The length might be too short. If you want to lengthen, off-setting the hem is the easiest way.

*********************

The sewing pattern includes 15 pages of instructions and all the sewing processes are described with detailed illustrations. The pattern files are available for both home printers (A4 or US letter) and copyshop(A0/A1 format).

You can check other photos of this model on my Flickr page.

The Utility apron / Tool belt -Kaede- (size XS - XXL) PDF sewing pattern is available here. Also in the Etsy shop.

Special discount price until 12th Sep 2022 (CEST) with other popular patterns. No discount code is needed! The sale page is here.

*****  Special offer +12EUR for Paper pattern and free shipping Paper pattern + PDF option is available with plus 12EUR. Shipping worldwide. But please note that, in the current situation, all the shipments are affected by the measure of COVID-19. There might be some shipping delays or accidents. *The paper includes only the pattern, please print out the instruction by yourself or read it with your tablet or PC.  The PDF + Paper listing page is here.

*In the sale period, the shipping of the paper pattern starts 13th Sep 2022.

Enjoy your sewing!

(Japanese post here 日本語ポストはこちら).

**********************

Meet new sewing pattern <Anzu> Cargo Skirt

Meet the new item from Waffle Patterns Cargo skirt <Anzu> sewing pattern. This is a work/outdoor-wear inspired A-line skirt with functional details and many pockets, like a tool pocket, hammer loop, or holster pocket.

Make it with all the fun options or just keep it simple for daily use as you like. Depending on the design options or fabrics, it will be a hiking skirt, work apron or travel skirt, etc.

This is also a skirt version of my popular pattern <Azuki> cargo pants. If you like work/outdoor items, please try Azuki pants, too.

<Design options>

The front opening has 2 options; double-breasted with button closure or zipper opening. I think the zipper type is suitable for daily use and double breasted will be fun for a work apron. The side pockets are also 2 types. Please choose from the edge type and easy patch type.

For the long-length version, you can add three more patch pockets. They are all workwear-inspired functional designs; zipper pocket, flap pocket, and back tool pocket.

My favorite is the back zipper pocket on the yoke. I think it’s also nice to make with waterproof materials like thin nylon for hiking or travel skirts.

You can sew with or without the details like adjuster belt, hammer loop, inside pocket, back pleats, or lining. Please choose them as your fabric and design intention.

The yellow sample in the photos is intended for daily casual wear, featuring short length + side patch pockets + zipper opening. The salmon pink sample is more like a workwear style. I made it with long length + back pleats + double-breasted front opening and add many fun pockets.

<fabric recommendation>

The pattern is drafted for woven fabrics. Medium weight skirt fabrics will be suitable. For the authentic workwear style, denim, canvas, duck, cotton twill or chino are suitable. For travel/hiking skirts, outdoor fabric like softshell, water-repellent or some quilted fabric will be an interesting option. Just make sure that some specially thick fabrics are not suitable for details like pockets or pleat. Also some fabrics may require size adjustment, I recommend to make muslin for perfect fit.

It includes the lining pattern, too. Of course you can sew without a liner. Please choose suitable lining material depending on the shell and your design intention.

The salmon pink sample was made with mid-weight cotton duck. It was very easy to handle and a very fitting material for workwear.

The yellow sample is a mixed cotton twill. It is quite thick, so I avoided unsuitable details like the back pleat, layered pocket, etc.

I’m planning to make one more for the winter season with quilted fabric or water repellent fabric with warm fleece lining.

<Other> 

You can make it with or without the back pleat. For outdoor/work use, the pleat version will be more reasonable for more movement ease. The detachable holster pocket shares the same size/design as Azuki cargo pants. If you already made the pants, you can use the same pattern if the size is the same.

********************* The sewing pattern includes the 19 pages instruction and all the sewing processes are described with detailed illustrations. The pattern files are available for both home printers (A4 or US letter) and copy shop(A0 format).

You can check other photos of this model on my Flickr page.

The Cargo skirt -Anzu- (size 32-52) PDF sewing pattern is available here. Also in the Etsy shop.

Special discount price until 15th April(CEST) with other popular patterns. No discount code is needed! The sale page is here.

*****  Special offer +12EUR for Paper pattern and free shipping Paper pattern + PDF option is available with plus 12EUR. Shipping worldwide. But please note that, in the current situation, all the shipments are affected by the measure of COVID-19. There might be some shipping delays or accidents. *The paper includes only the pattern, please print out the instruction by yourself or read it with your tablet or PC.  The PDF + Paper listing page is here.

*In the sale period, the shipping of the paper pattern starts 16th Apr.

Enjoy your sewing!

(Japanese post here 日本語ポストはこちら).

**********************

Meet new sewing pattern <Yomogi> Shirt jacket

A new item for the fall season is just released from Waffle Patterns. Meet Shirt jacket <Yomogi> sewing pattern. A safari jacket inspired design with many functional details.

I love the classic safari shirt design because it’s functional sportswear but still looks neat and smart. Also, I saw a lot of safari jacket inspired runway look in recent seasons. Since this item is on my to-make list years long, I’m so happy finally can release it.

The base of the design is a regular fit shirt jacket with waist shaping. Of course, there are many pockets with design options including an inside pocket. Please play with the options and make it as you like. Depending on the fabric, it is going to be a very authentic safari shirt with khaki cotton twill or a vintage style with tweed wool fabric.

<Design options>

This shirt jacket has 2 chest pockets, 2 waist pockets, and an inside pocket. Both the chest and waist pocket are patch pockets, so very easy to install. 

The waist pocket design has 2 options. One is a patch pocket with flap and pleat. The other is a layered pocket with 2 pocket openings, it can be used as a hand warmer pocket. Please see the photo below about the detail.

The front opening has 2 options, too; a standard button closure or a hidden button stands. The brick-red sample in the photos shows the standard button opening. I attached large buttons for making them a design point. The gray herringbone sample features a hidden button stand. I like that makes a neat minimal style. You can also make with or without pockets. Please choose them as your fabric and design intension.

<fabric recommendation>

The pattern is drafted for woven fabrics. Light - medium weight jacket fabrics will be suitable. For the classic safari jacket, cotton twill, chino or duck will be nice options. I think wool, denim, corduroy, tweed, faux leather will be great, too.

The brick-red sample is cotton twill. I like the bright color and it’s very easy to sew and iron. I combine this very fun Koi print cotton as a liner. If you want to use non-lining fabric for liner like this, it is better to use for only bodice parts and use normal slippery lining material for sleeve parts for comfort.

The gray sample is mixed wool herringbone. I like this vintage and classic look! Maybe I should make matching pants and wear them like a suit.

I wanted to make one more with houndstooth wool. Unfortunately, under current measure influences, I could not find the perfect fabric in time.

<Other> You can make with or without lining. The instruction shows both ways. There are no big differences except the cuff opening part. Please check the instruction about the details of how to sew the cuff opening w/wo lining.

The interfacing on the Yoke parts is optional. If you want to make like a shirt, without interfacing will be no problem. I did not use on the brick-red sample, because the fabric is stiff enough. But I used on the gray wool sample for adding the structure on the soft material. Please choose depending on your fabric and your design intension.

********************* The sewing pattern includes the 19 pages instruction and all the sewing processes are described with detailed illustrations. The pattern files are available for both home printers (A4 or USletter) and copy shop(A0/A1 format).

You can check other photos of this model on my Flickr page.

The shirt jacket -Yomogi- (size 32-52) PDF sewing pattern is available here. Also in the Etsy shop.

Special discount price until 20th Oct with other fall/winter patterns. No discount code is needed! The sale page is here.

*****  Special offer +13EUR for Paper pattern and free shipping Paper pattern + PDF option is available with plus 13EUR. Shipping worldwide. But please note that, in the current situation, all the shipments are affected by the measure of COVID-19. There might be some shipping delays or accidents. *The paper includes only the pattern, please print out the instruction by yourself or read it with your tablet or PC.  The PDF + Paper listing page is here.

*In the sale period, the shipping of the paper pattern starts 21st Oct.

Enjoy your sewing!

(Japanese post here 日本語ポストはこちら).

*********************

Meet new sewing pattern <Azuki> Work pants

I feel it’s a bit strange time to release a new product. But I also hope this helps people enjoying to spend time at home. Meet my new sewing pattern, Work pants <Azuki>. 

I am a big fan of utility/work items and making or sketching those a lot. This pattern was made with those researches.

The base of the pants design is a very authentic regular ~ loose-fitting straight pants. But there are many functional options inspired by traditional workwear, like a tool pocket, hammer loop or knee patches with 3D shape. Make them with all the fun options or just keep them simple for daily use as you like.

<Design options>

Besides the edge pockets on both sides, there are 3 additionals for the front pockets, thigh pocket with zipper, flap thigh pocket and detachable holster pocket. Please choose them as your usage.

Back pockets are also customizable. I personally like this asymmetric look but you can make them like normal denim pants.

There are many other details inspired trad work pants like adjuster belt, hummer loop, or knee patches. Making those details requires time but they are well worth the effort. I hope you enjoy choosing and customizing the detail.

<fabric recommendation>

The pattern is drafted for woven pants fabrics. For the authentic work pants, denim, canvas, duck, cotton twill or chino are suitable. I also want to try with water-repellent fabrics like oil-coated fabric, depending on the usage.

Although the pattern is for woven, I tried to make them with stretch. The yellow ocher sample in the photo was made with low tension(under 7%) stretch denim. I needed to adjust the pattern around hip about -6mm on Front and Back. If you need to use stretch fabric, I recommend a low tension one and to consider altering the pattern for fitting by making a muslin.

The salmon pink sample was made with mid-weight cotton duck with contrast fabric. It was very easy to handle and very fitting material for workwear.

Generally, woven fabrics are more durable than stretch so they are suitable for utility items. But when I researched a workwear trade show, I saw many companies are recently using stretch fabrics on full-body or some specific parts for helping body movement. In countries with humid weather, like my mother country Japan, it looks 100% cotton woven is still very standard for comfort.

*********************  The sewing pattern includes the 15 pages instruction and all the sewing processes are described with detailed illustrations. The pattern files are available for both homeprinter(A4 or USletter) and copy shop(A0/A1 format).

You can check other photos of this model on my Flickr page.

The Work pants -Azuki- (size 32-52) PDF sewing pattern is available here. Also in the Etsy shop.

Special discount price until 20th May with other summer patterns! No discount code needed! The sale page is here.

*****  Special offer +11EUR for Paper pattern and free shipping Paper pattern + PDF option is available with plus 11EUR. Shipping worldwide. But please note that, in the current situation, all the shipments are affected by the measure of COVID-19. There might be some shipping delays or accidents. *The paper includes only the pattern, please print out the instruction by yourself or read it with your tablet or PC.  The PDF + Paper listing page is here.

*In the sale period, the shipping of the paper pattern starts 21st May.

Enjoy your sewing!

(Japanese post here 日本語ポストはこちら).

*********************