@felinalainĀ Here he is all printed! He doesnāt look all that bad all things considered!
I figured the claws and wingy bits might not print well with the Ender 3 (Iāve noticed mine has a few problems with some fine details) but they turned out a little better than I thought. The wings and left arm came off when I removed the supports but a bit of super glue fixed the arm right back. The wingy bits Iāve since removed to be safe. Iāll probably make some replacements out of yoghurt lid and some wire to make them a bit more sturdy and poseable. Maybe white twist ties for his claws. (or Iāll need to borrow the Nephewās 3D doodler pen to do some tidy up)
I printed in the horizontal axis and went heavy with the supports and used a raft but I think I might try another orientation as well at another time as the underside is a mess from the support material being peeled off. For now Iāll just say this fellow is a battle damaged variant!
My slicer settings were: Material - Flashforge White PLA; Layer height- 0.2, 75% infill (gyroid);Ā Curaās supports manually set at a 15Ā° angle for āeverywhereā and used a raft to help it stick to the build plate. Total print time was 4 hours.
