#fc200

This guide demonstrates the process of reading a Toyota ECU using the CGDI FC200 ECU Programmer and the FC200 DAP adapter.

Connection Steps: 1. Connect the adapters in the correct sequence. 2. Refer to the wiring diagram and connect all pins accordingly. 3. Connect the device to a USB port and power supply. 4. Connect the host cable to the adapter, with the other end attached to your computer. 5. All connections are now complete.

Software Operation: 1. On your computer, open the FC200 software and enter the specific ECU model. 2. Click "Connect." Once the connection is successfully established, proceed to read the Pflash memory. 3. After saving the data, the task is complete.

For a visual walkthrough, please refer to the video guide:

Is CGDI FC200 ECU programmer already activated, or should I provide the device's serial number? How can I activate this device?

Locksmiths, please follow the step-by-step instructions provided by this CGDI blog to solve this problem.

Device Authorization

Step 1: CG FC200 software requires authorization before use

Step 2: Click Authorization Information button on the main interface to view the authorization list

Step 3: Click the Update Authorization button

Step 4: If "No" is still displayed after updating authorization, please contact your seller for further help.

For more information, download CGDI FC200 user manual

DjiDji Phantom 2 Vision Camera Fc200

14 Mega Pixel Still Images . HD Recording 1080/30P OR 1080/60I , FOV And Aperture – 140* Wide Angle F2.8 , DJI Phantom 2 Vision Camera FC200 Unit , DJI Spare Part No. 14. Product Features 14 Mega Pixel Still Images Easy to use A good quality product