#eaccelerator

Solution: Apc, xcache or eAccelerator? What should I use for WordPress? #dev #solution #computers

Apc, xcache or eAccelerator? What should I use for WordPress?

Im trying to configure a server for a WordPress site. What should I use for opcode caching? Apc, xcache or eAccelerator?

Answer [by Logic Wreck]: Apc, xcache or eAccelerator? What should I use for WordPress?

I would use apc on a nginx+php-fpm configuration. This is generally what we use for our site.

Answer [by Julian Fernandes]:…

How to install XAMPP 1.8.3 with PHP 5.5.11 on Centos Sever

XAMPP is a collection of packages includes Apache web server, MySQL databse server, PEARl, SQLite, ProFTPD, phpMyAdmin, OpenSSL, GD, Freetype, openLDAP and nessary libraries. If you are not comfortable to install/configure each package separately, XAMPP is a good choice for you since everything is configured with XAMPP. XAMPP isn’t only run on Linux, XAMPP is an open source cross-platform means…

New Post has been published on http://mocco.sk/running-processwire-on-nginx-lemp-on-debian-wheezyubuntu-13-04/

Running ProcessWire On Nginx (LEMP) On Debian Wheezy/Ubuntu 13.04

Version 1.0 Author: Falko Timme <ft [at] falkotimme [dot] com> Follow me on Twitter Last edited 08/19/2013

This tutorial shows how you can install and run ProcessWire on a Debian Wheezy or Ubuntu 13.04 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced “engine x”) + MySQL + PHP). nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

I want to install ProcessWire in a vhost called www.example.com/example.com here with the document root /var/www/www.example.com/web.

You should have a working LEMP installation, as shown in this tutorial:

A note for Ubuntu users:

Because we must run all the steps from this tutorial with root privileges, we can either prepend all commands in this tutorial with the string sudo, or we become root right now by typing

sudo su

2 Installing APC

APC is a free and open PHP opcode cacher for caching and optimizing PHP intermediate code. It’s similar to other PHP opcode cachers, such as eAccelerator and XCache. It is strongly recommended to have one of these installed to speed up your PHP page.

APC can be installed as follows:

apt-get install php-apc

Reload PHP-FPM as follows:

/etc/init.d/php5-fpm reload

3 Installing ProcessWire

The document root of my www.example.com web site is /var/www/www.example.com/web – if it doesn’t exist, create it as follows:

mkdir -p /var/www/www.example.com/web

Next download ProcessWire from the ProcessWire web site, uncompress it and place it in your document root:

mkdir /tmp/processwire cd /tmp/processwire wget https://github.com/ryancramerdesign/ProcessWire/archive/master.zip unzip master.zip rm -f master.zip cd ProcessWire-master mv * /var/www/www.example.com/web/

It is recommended to make the document root and the ProcessWire files in it writable by the nginx daemon which is running as user www-data and group www-data:

chown -R www-data:www-data /var/www/www.example.com/web

If you haven’t already created a MySQL database for processwire (including a MySQL ProcessWire user), you can do that as follows (I name the database pw in this example, and the user is called pw_admin, and his password is pw_admin_password):

mysqladmin -u root -p create pw

mysql -u root -p

GRANT ALL PRIVILEGES ON pw.* TO ‘pw_admin’@'localhost’ IDENTIFIED BY ‘pw_admin_password’; GRANT ALL PRIVILEGES ON pw.* TO ‘pw_admin’@'localhost.localdomain’ IDENTIFIED BY ‘pw_admin_password’;

FLUSH PRIVILEGES;

quit;

Next we create an nginx vhost configuration for our www.example.com vhost in the /etc/nginx/sites-available/ directory as follows:

vi /etc/nginx/sites-available/www.example.com.vhost

server { listen 80; server_name www.example.com example.com; root /var/www/www.example.com/web; if ($http_host != "www.example.com") { rewrite ^ http://www.example.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } client_max_body_size 100M; location ~ /(COPYRIGHT|LICENSE|README|htaccess)\.txt { deny all; } location ~ ^/site(-[^/]+)?/assets/(.*\.php|backups|cache|config|install|logs|sessions) { deny all; } location ~ ^/site(-[^/]+)?/install { deny all; } location ~ ^/(site(-[^/]+)?|wire)/(config(-dev)?|index\.config)\.php { deny all; } location ~ ^/((site(-[^/]+)?|wire)/modules|wire/core)/.*\.(inc|module|php|tpl) { deny all; } location ~ ^/(site(-[^/]+)?|wire)/templates(-admin)?/.*\.(inc|html?|php|tpl) { deny all; } ### GLOBAL REWRITE location / { try_files $uri $uri/ /index.php?it=$uri&$args; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_intercept_errors on; } }

To enable the vhost, we create a symlink to it from the /etc/nginx/sites-enabled/ directory:

cd /etc/nginx/sites-enabled/ ln -s /etc/nginx/sites-available/www.example.com.vhost www.example.com.vhost

Reload nginx for the changes to take effect:

/etc/init.d/nginx reload

Now we can launch the web-based ProcessWire installer by going to http://www.example.com – click on Get Started:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

The installer checks if all prerequisites are fulfilled. When you scroll down…

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

… you will see a warning regarding Apache mod_rewrite. Since we are not using Apache, you can ignore this warning and click on Continue to Next Step:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

In the next step, fill in the MySQL database details, …

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

… then scroll down and click on Continue (the default directory and file permissions are ok):

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

On the next page, fill in a username, password, and email address for the ProcessWire administrator. The default admin login URL should be ok. Click on Create Account afterwards:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

After successful installation, you should see the following screen:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Now write-protect the configuration file and delete the installer:

cd /var/www/www.example.com/web chmod 444 site/config.php rm -f install.php rm -fr site/install/

You can now browse the ProcessWire example site by going to http://www.example.com:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

The backend can be accessed under http://www.example.com/processwire (unless you have specified another admin login URL during installation):

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

This is how the backend looks:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

4 Links

About The Author

Falko Timme is the owner of Timme Hosting (ultra-fast nginx web hosting). He is the lead maintainer of HowtoForge (since 2005) and one of the core developers of ISPConfig (since 2000). He has also contributed to the O’Reilly book “Linux System Administration”.

New Post has been published on http://mocco.sk/running-cs-cart-on-nginx-lemp-on-debian-wheezyubuntu-13-04/

Running CS-Cart On Nginx (LEMP) On Debian Wheezy/Ubuntu 13.04

Version 1.0 Author: Falko Timme <ft [at] falkotimme [dot] com> Follow me on Twitter Last edited 08/19/2013

This tutorial shows how you can install and run CS-Cart on a Debian Wheezy or Ubuntu 13.04 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced “engine x”) + MySQL + PHP). nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

I want to install CS-Cart in a vhost called www.example.com/example.com here with the document root /var/www/www.example.com/web.

You should have a working LEMP installation, as shown in this tutorial:

A note for Ubuntu users:

Because we must run all the steps from this tutorial with root privileges, we can either prepend all commands in this tutorial with the string sudo, or we become root right now by typing

sudo su

2 Installing APC

APC is a free and open PHP opcode cacher for caching and optimizing PHP intermediate code. It’s similar to other PHP opcode cachers, such as eAccelerator and XCache. It is strongly recommended to have one of these installed to speed up your PHP page.

APC can be installed as follows:

apt-get install php-apc

Reload PHP-FPM as follows:

/etc/init.d/php5-fpm reload

3 Installing CS-Cart

The document root of my www.example.com web site is /var/www/www.example.com/web – if it doesn’t exist, create it as follows:

mkdir -p /var/www/www.example.com/web

Next download CS-Cart from the CS-Cart web site (I’m using CS-Cart Ultimate here) to your local computer; from there, upload it to your server (e.g. create a /tmp/cscart directory and upload it there), uncompress it and place it in your document root:

cd /tmp/cscart tar xvfz cscart_v4.0.1-ultimate.tgz rm -f rm -f cscart_v4.0.1-ultimate.tgz mv * .htaccess /var/www/www.example.com/web/

It is recommended to make the document root and the CS-Cart files in it writable by the nginx daemon which is running as user www-data and group www-data:

chown -R www-data:www-data /var/www/www.example.com/web

If you haven’t already created a MySQL database for CS-Cart (including a MySQL CS-Cart user), you can do that as follows (I name the database cscart in this example, and the user is called cscart_admin, and his password is cscart_admin_password):

mysqladmin -u root -p create cscart

mysql -u root -p

GRANT ALL PRIVILEGES ON cscart.* TO ‘cscart_admin’@'localhost’ IDENTIFIED BY ‘cscart_admin_password’; GRANT ALL PRIVILEGES ON cscart.* TO ‘cscart_admin’@'localhost.localdomain’ IDENTIFIED BY ‘cscart_admin_password’;

FLUSH PRIVILEGES;

quit;

Next we create an nginx vhost configuration for our www.example.com vhost in the /etc/nginx/sites-available/ directory as follows:

vi /etc/nginx/sites-available/www.example.com.vhost

server { listen 80; server_name www.example.com example.com; root /var/www/www.example.com/web; if ($http_host != "www.example.com") { rewrite ^ http://www.example.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } client_max_body_size 100M; rewrite /api/(.*)$ /api.php?_d=$1&ajax_custom=1 last; location ~ \.(png|gif|ico|swf|jpe?g|js|css|ttf|svg|eot|woff)$ { if (!-e $request_filename){ rewrite ^/(.*?)\/(.*)$ /$2 last; } expires 1w; } location ~ store_closed.html$ { if (!-e $request_filename){ rewrite ^/(.*?)\/(.*)$ /$2 last; } } location / { index index.php; try_files $uri $uri/ /index.php?sef_rewrite=1&$args; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_intercept_errors on; fastcgi_temp_file_write_size 10m; fastcgi_busy_buffers_size 512k; fastcgi_buffer_size 512k; fastcgi_buffers 16 512k; fastcgi_read_timeout 1200; } }

To enable the vhost, we create a symlink to it from the /etc/nginx/sites-enabled/ directory:

cd /etc/nginx/sites-enabled/ ln -s /etc/nginx/sites-available/www.example.com.vhost www.example.com.vhost

Reload nginx for the changes to take effect:

/etc/init.d/nginx reload

Now we can launch the web-based CS-Cart installer by going to http://www.example.com/install – accept the license and click on Next step:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

On the next page, fill in your MySQL database details, then scroll down…

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

… and provide an email address (this will be your username) and password for the CS-Cart backend; you can also choose to install demo data for your CS-Cart shop:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

On the next page, select the store mode. If you have a CS-Cart license number, select Full, otherwise Free or Trial:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

If everything goes fine, the installation should finish successfully. It is recommended that you click on the Go to the Settings Wizard button to configure the initial settings for your CS-Cart shop.

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

You can reach the backend under http://www.example.com/admin.php (unless you have chosen to rename the admin.php script in the Settings Wizard):

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

This is how your CS-Cart shop looks if you have chosen to install demo data during installation:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

4 Links

About The Author

Falko Timme is the owner of Timme Hosting (ultra-fast nginx web hosting). He is the lead maintainer of HowtoForge (since 2005) and one of the core developers of ISPConfig (since 2000). He has also contributed to the O’Reilly book “Linux System Administration”.

New Post has been published on http://mocco.sk/running-prestashop-1-5-x-on-nginx-lemp-on-debian-wheezyubuntu-12-10/

Running PrestaShop 1.5.x On Nginx (LEMP) On Debian Wheezy/Ubuntu 12.10

Version 1.0 Author: Falko Timme <ft [at] falkotimme [dot] com> Follow me on Twitter Last edited 04/02/2013

This tutorial shows how you can install and run a PrestaShop 1.5.x web site on a Debian Wheezy or Ubuntu 12.10 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced “engine x”) + MySQL + PHP). nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

I want to install PrestaShop in a vhost called www.example.com/example.com here with the document root /var/www/www.example.com/web.

You should have a working LEMP installation, as shown in this tutorial:

A note for Ubuntu users:

Because we must run all the steps from this tutorial with root privileges, we can either prepend all commands in this tutorial with the string sudo, or we become root right now by typing

sudo su

2 Installing APC

APC is a free and open PHP opcode cacher for caching and optimizing PHP intermediate code. It’s similar to other PHP opcode cachers, such as eAccelerator and XCache. It is strongly recommended to have one of these installed to speed up your PHP page.

APC can be installed as follows:

apt-get install php-apc

Reload PHP-FPM as follows:

/etc/init.d/php5-fpm reload

3 Installing PrestaShop

The document root of my www.example.com web site is /var/www/www.example.com/web – if it doesn’t exist, create it as follows:

mkdir -p /var/www/www.example.com/web

Next download PrestaShop from http://www.prestashop.com/en/download to your local computer; from there, upload it to your server (e.g. the /tmp directory), unzip it and place it in your document root:

cd /tmp unzip prestashop_1.5.4.0.zip cd prestashop/ mv * /var/www/www.example.com/web/

It is recommended to make the document root and the PrestaShop files in it writable by the nginx daemon which is running as user www-data and group www-data:

chown -R www-data:www-data /var/www/www.example.com/web

If you haven’t already created a MySQL database for PrestaShop (including a MySQL PrestaShop user), you can do that as follows (I name the database presta in this example, and the user is called presta_admin, and his password is presta_admin_password):

mysqladmin -u root -p create presta

mysql -u root -p

GRANT ALL PRIVILEGES ON presta.* TO ‘presta_admin’@'localhost’ IDENTIFIED BY ‘presta_admin_password’; GRANT ALL PRIVILEGES ON presta.* TO ‘presta_admin’@'localhost.localdomain’ IDENTIFIED BY ‘presta_admin_password’;

FLUSH PRIVILEGES;

quit;

Next we create an nginx vhost configuration for our www.example.com vhost in the /etc/nginx/sites-available/ directory as follows:

vi /etc/nginx/sites-available/www.example.com.vhost

server { listen 80; server_name www.example.com example.com; root /var/www/www.example.com/web; if ($http_host != "www.example.com") { rewrite ^ http://www.example.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } rewrite ^/api/?(.*)$ /webservice/dispatcher.php?url=$1 last; rewrite ^/([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ /img/p/$1/$1$2$3.jpg last; rewrite ^/([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ /img/p/$1/$2/$1$2$3$4.jpg last; rewrite ^/([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ /img/p/$1/$2/$3/$1$2$3$4$5.jpg last; rewrite ^/([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ /img/p/$1/$2/$3/$4/$1$2$3$4$5$6.jpg last; rewrite ^/([0-9])([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ /img/p/$1/$2/$3/$4/$5/$1$2$3$4$5$6$7.jpg last; rewrite ^/([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ /img/p/$1/$2/$3/$4/$5/$6/$1$2$3$4$5$6$7$8.jpg last; rewrite ^/([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ /img/p/$1/$2/$3/$4/$5/$6/$7/$1$2$3$4$5$6$7$8$9.jpg last; rewrite ^/([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ /img/p/$1/$2/$3/$4/$5/$6/$7/$8/$1$2$3$4$5$6$7$8$9$10.jpg last; rewrite ^/c/([0-9]+)(\-[\.*_a-zA-Z0-9-]*)(-[0-9]+)?/.+\.jpg$ /img/c/$1$2$3.jpg last; rewrite ^/c/([a-zA-Z_-]+)(-[0-9]+)?/.+\.jpg$ /img/c/$1$2.jpg last; rewrite ^/images_ie/?([^/]+)\.(jpe?g|png|gif)$ /js/jquery/plugins/fancybox/images/$1.$2 last; try_files $uri $uri/ /index.php$is_args$args; error_page 404 /index.php?controller=404; location ~* \.(gif)$ { expires 2592000s; } location ~* \.(jpeg|jpg)$ { expires 2592000s; } location ~* \.(png)$ { expires 2592000s; } location ~* \.(css)$ { expires 604800s; } location ~* \.(js|jsonp)$ { expires 604800s; } location ~* \.(js)$ { expires 604800s; } location ~* \.(ico)$ { expires 31536000s; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_intercept_errors on; } }

To enable the vhost, we create a symlink to it from the /etc/nginx/sites-enabled/ directory:

cd /etc/nginx/sites-enabled/ ln -s /etc/nginx/sites-available/www.example.com.vhost www.example.com.vhost

Reload nginx for the changes to take effect:

/etc/init.d/nginx reload

Now we can launch the web-based PrestaShop installer by going to http://www.example.com/install/ – first you have to select the language you want the installer to use:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Next accept the PrestaShop license:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Fill in your database details and click on Next:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Running PrestaShop 1.5.x On Nginx (LEMP) On Debian Wheezy/Ubuntu 12.10 – Page 2

New Post has been published on http://mocco.sk/running-activecollab-3-on-nginx-lemp-on-debian-wheezyubuntu-12-10/

Running ActiveCollab 3 On Nginx (LEMP) On Debian Wheezy/Ubuntu 12.10

Version 1.0 Author: Falko Timme <ft [at] falkotimme [dot] com> Follow me on Twitter Last edited 04/10/2013

This tutorial shows how you can install and run activeCollab 3 on a Debian Wheezy or Ubuntu 12.10 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced “engine x”) + MySQL + PHP). nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

I want to install activeCollab in a vhost called www.example.com/example.com here with the document root /var/www/www.example.com/web.

You should have a working LEMP installation, as shown in this tutorial:

A note for Ubuntu users:

Because we must run all the steps from this tutorial with root privileges, we can either prepend all commands in this tutorial with the string sudo, or we become root right now by typing

sudo su

2 Installing APC

APC is a free and open PHP opcode cacher for caching and optimizing PHP intermediate code. It’s similar to other PHP opcode cachers, such as eAccelerator and XCache. It is strongly recommended to have one of these installed to speed up your PHP page.

APC can be installed as follows:

apt-get install php-apc

Reload PHP-FPM as follows:

/etc/init.d/php5-fpm reload

3 Installing activeCollab

The document root of my www.example.com web site is /var/www/www.example.com/web – if it doesn’t exist, create it as follows:

mkdir -p /var/www/www.example.com/web

Next download activeCollab from the activeCollab web site (you need to buy a license – it’s not freeware) to your local computer; from there, upload it to your server (e.g. the /tmp directory), unzip it and place it in your document root:

cd /tmp unzip activecollab-corporate-3.2.12.zip cd for-upload/ mv * /var/www/www.example.com/web/

It is recommended to make the document root and the activeCollab files in it writable by the nginx daemon which is running as user www-data and group www-data:

chown -R www-data:www-data /var/www/www.example.com/web

If you haven’t already created a MySQL database for activeCollab (including a MySQL activeCollab user), you can do that as follows (I name the database activecollab in this example, and the user is called ac_admin, and his password is ac_admin_password):

mysqladmin -u root -p create activecollab

mysql -u root -p

GRANT ALL PRIVILEGES ON activecollab.* TO ‘ac_admin’@'localhost’ IDENTIFIED BY ‘ac_admin_password’; GRANT ALL PRIVILEGES ON activecollab.* TO ‘ac_admin’@'localhost.localdomain’ IDENTIFIED BY ‘ac_admin_password’;

FLUSH PRIVILEGES;

quit;

Next we create an nginx vhost configuration for our www.example.com vhost in the /etc/nginx/sites-available/ directory as follows:

vi /etc/nginx/sites-available/www.example.com.vhost

server { listen 80; server_name www.example.com example.com; root /var/www/www.example.com/web; if ($http_host != "www.example.com") { rewrite ^ http://www.example.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } location / { try_files $uri $uri/ /index.phppath_info=$uri&$args; access_log off; expires max; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_intercept_errors on; } }

To enable the vhost, we create a symlink to it from the /etc/nginx/sites-enabled/ directory:

cd /etc/nginx/sites-enabled/ ln -s /etc/nginx/sites-available/www.example.com.vhost www.example.com.vhost

Reload nginx for the changes to take effect:

/etc/init.d/nginx reload

Now we can launch the web-based activeCollab installer by going to http://www.example.com – click on the Validate button to have the installer check if the system requirements are fulfilled:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

If the system requirements are fulfilled, you can now fill in your database details and click on Connect:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Next, specify an email address and password for the administrator account, accept the license agreement and click on Install:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

That’s it – click on the Log in Now! button or go to http://www.example.com/public/index.php…

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

… to log into activeCollab:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

This is how the activeCollab interface looks:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

4 Links

About The Author

Falko Timme is the owner of Timme Hosting (ultra-fast nginx web hosting). He is the lead maintainer of HowtoForge (since 2005) and one of the core developers of ISPConfig (since 2000). He has also contributed to the O’Reilly book “Linux System Administration”.

New Post has been published on http://mocco.sk/running-redaxo-4-4-x-on-nginx-lemp-on-debian-wheezyubuntu-12-10/

Running Redaxo 4.4.x On Nginx (LEMP) On Debian Wheezy/Ubuntu 12.10

Version 1.0 Author: Falko Timme <ft [at] falkotimme [dot] com> Follow me on Twitter Last edited 04/02/2013

This tutorial shows how you can install and run a Redaxo 4.4.x web site on a Debian Wheezy or Ubuntu 12.10 system that has nginx installed instead of Apache (LEMP = Linux + nginx (pronounced “engine x”) + MySQL + PHP). nginx is a HTTP server that uses much less resources than Apache and delivers pages a lot of faster, especially static files.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

I want to install Redaxo in a vhost called www.example.com/example.com here with the document root /var/www/www.example.com/web.

You should have a working LEMP installation, as shown in this tutorial:

A note for Ubuntu users:

Because we must run all the steps from this tutorial with root privileges, we can either prepend all commands in this tutorial with the string sudo, or we become root right now by typing

sudo su

2 Installing APC

APC is a free and open PHP opcode cacher for caching and optimizing PHP intermediate code. It’s similar to other PHP opcode cachers, such as eAccelerator and XCache. It is strongly recommended to have one of these installed to speed up your PHP page.

APC can be installed as follows:

apt-get install php-apc

Reload PHP-FPM as follows:

/etc/init.d/php5-fpm reload

3 Installing Redaxo

The document root of my www.example.com web site is /var/www/www.example.com/web – if it doesn’t exist, create it as follows:

mkdir -p /var/www/www.example.com/web

Next we download Redaxo (the .tar.gz version) from http://www.redaxo.org/de/download/ and place it in our document root:

cd /tmp wget http://www.redaxo.org/files/redaxo4_4_1.zip unzip redaxo4_4_1.zip cd redaxo4_4_1/ mv * /var/www/www.example.com/web/

It is recommended to make the document root and the Redaxo files in it writable by the nginx daemon which is running as user www-data and group www-data:

chown -R www-data:www-data /var/www/www.example.com/web

If you haven’t already created a MySQL database for Redaxo (including a MySQL Redaxo user), you can do that as follows (I name the database redaxo in this example, and the user is called redaxo_admin, and his password is redaxo_admin_password):

mysqladmin -u root -p create redaxo

mysql -u root -p

GRANT ALL PRIVILEGES ON redaxo.* TO ‘redaxo_admin’@'localhost’ IDENTIFIED BY ‘redaxo_admin_password’; GRANT ALL PRIVILEGES ON redaxo.* TO ‘redaxo_admin’@'localhost.localdomain’ IDENTIFIED BY ‘redaxo_admin_password’;

FLUSH PRIVILEGES;

quit;

Next we create an nginx vhost configuration for our www.example.com vhost in the /etc/nginx/sites-available/ directory as follows:

vi /etc/nginx/sites-available/www.example.com.vhost

server { listen 80; server_name www.example.com example.com; root /var/www/www.example.com/web; if ($http_host != "www.example.com") { rewrite ^ http://www.example.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } location ^~ /redaxo/include { deny all; } location / { try_files $uri $uri/ /index.php$args; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_intercept_errors on; } }

To enable the vhost, we create a symlink to it from the /etc/nginx/sites-enabled/ directory:

cd /etc/nginx/sites-enabled/ ln -s /etc/nginx/sites-available/www.example.com.vhost www.example.com.vhost

Reload nginx for the changes to take effect:

/etc/init.d/nginx reload

Now we can launch the web-based Redaxo installer by going to http://www.example.com – first select your preferred language:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Next accept the Redaxo license by clicking on the Start setup and accept licence agreement link:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

The installer checks if the prerequisites are fulfilled. If everything is ok, click on Proceed to step 2:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Next fill in the domain of the web site, an email address, and your database details. Click on the Proceed to step 3 button:

(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Running Redaxo 4.4.x On Nginx (LEMP) On Debian Wheezy/Ubuntu 12.10 – Page 2

При входе в PhpMyAdmin после установки eAccelerator выдается белый экран.

Необходимо в /etc/apache2/conf.d/phpmyadmin.conf в раздел Directory внести следующие изменения:

php_admin_value eaccelerator.enable 0