#canadasolar

Most people think snow is always bad for solar panels. And yes—when snow covers the front of a panel, production drops until it melts or slides off.

But here’s the twist:

If you use bifacial solar panels, snow can actually help you produce more energy in winter.

Bifacial panels generate electricity from both sides:

Front side: direct sunlight

Rear side: reflected light bouncing up from the ground

And in Canada, fresh snow can turn the ground into a giant reflector. ✨

Full reference guide here (SolarElios): 👉 https://solarelios.com/blogs/bifacial-solar-panels-in-snow-how-winter-reflectivity-can-boost-output-in-canada/

Why Snow Matters for Bifacial Solar

Bifacial panels benefit from something called albedo (basically: how reflective the ground is).

Dark ground absorbs light → low reflectivity

Fresh snow reflects a lot of light → high reflectivity

So instead of sunlight being “lost” to the ground, snow sends more of it back up toward the rear of the panel.

What that means: snow can increase rear-side generation, which adds to total system output.

How “Bifacial Gain from Snow” Works (Simple Version)

Imagine your panel has a second solar face on the back.

When snow covers the ground:

Sunlight hits the snow

Snow reflects it upward

The rear of the panel captures it

You get extra energy beyond what the front side produces

Winter’s low sun angle can make this reflection effect even more noticeable—especially in open ground-mount setups.

The Design Stuff That Actually Makes It Work

Snow isn’t magic by itself—the layout has to allow reflected light to reach the rear side.

✅ Tilt + Spacing

A slightly steeper tilt can help with low winter sun

More spacing reduces shadows (winter shadows get long)

✅ Racking Height

Higher mounting often helps because:

there’s more “air space” for light to bounce under the panels

rear shading from nearby rows is reduced

drifting snow is less likely to block the rear side

But: higher racking can increase wind loads and cost—so it has to be engineered properly.

✅ Avoid Rear Shading

Rear-side shading kills bifacial gain fast. Common culprits:

conduit/wires behind panels

thick rails casting shadows

equipment placed directly behind modules

vegetation shadows in winter

Roof vs Ground vs Pole Mount (Winter Potential)

Not all installations get the same winter benefit.

Roof Mount: usually limited rear clearance → lower bifacial advantage Ground Mount: easier to optimize height + spacing → strong winter potential Pole Mount: elevated + great rear exposure → strong winter potential (but higher cost + wind loads)

Real-World Winter Scenarios (Canada Style)

🏡 Rural Ground-Mount (Alberta)

Ground-mount bifacial panels with higher clearance and wider spacing can see stronger winter afternoon production thanks to snow reflectivity.

🏢 Commercial Roof Retrofit (Quebec)

Roof clearance limits bifacial gains, so monofacial panels go on the roof—while a small bifacial ground array captures snow reflectivity outside.

🛖 Remote Cabin (North)

Elevated pole mounts reduce drifting snow buildup and improve reflected-light capture—especially helpful when paired with batteries for winter resilience.

Do You Need to Clear Snow?

Usually… not aggressively.

Snow on the front blocks output temporarily. Snow on the ground can increase reflected light.

You might clear snow only when:

you need immediate power right after storms

panels stay buried for long periods

drift patterns block the area under/around the array

Also: glare is a real consideration near roads or neighbors—tilt and placement help manage it.

Quick Winter Checklist ✅

Know your local snow patterns

Model expected winter bifacial gains conservatively

Choose a racking height that balances gain vs wind/cost

Optimize tilt + spacing for low winter sun

Keep the rear side clear of shading

Use racking/modules rated for Canadian snow loads

Plan safe winter access for inspection

How SolarElios Can Help

SolarElios provides end-to-end bifacial solutions across Canada—panels, racking, hybrid inverters/UPS systems, batteries, monitoring, and generator + ATS options.

If you want to design for real winter performance, start here: 👉 https://solarelios.com/blogs/bifacial-solar-panels-in-snow-how-winter-reflectivity-can-boost-output-in-canada/

Tip: Share a basic load list + site photos when requesting a quote—racking height and spacing decisions depend heavily on your site.

Final Takeaway ❄️☀️

Snow can reduce output when it covers your panels… …but it can also boost output when it reflects light onto bifacial modules.