#cabelinternet

Firstly, connect the modem to the internet port of the Netgear router and to your computer in any of the four LAN ports.

Press the router, computer, and boardband cable modem, off and on again. Wait until it finishes booting up.

Open the web browser page and type the router’s IP address http://192.168.01 or http://192.168.1.1 in the address bar and hit Enter.

Now you will be permitted to log into the router.

The default user name is the admin, and the default passwordis is password. The user name and password are case sensitive.

If the default user name and password is not working, try other passwords, or you may need to change the password. Or else you need to perform a factory reset to restore the router settings.

Click the Setup Wizard option. The Setup Wizard screen appears.

Select Yes and click Next option.

The Setup Wizard finds the type of internet connection. If you have a cable internet connection, the setup wizard detects a Dynamic IP address.

Click Next. The router will save the settings.

Don’t try to change the default settings unless your internet service provider gives you specific DNS information that must be configured.

Select Router Status under Maintenance to check if you are connected to the internet.

View the IP address field to see if the correct IP address is entered.