Reliable Heating and Air

When you hire Reliable, expect to have questions knowledgeably answered and problems solved. The most common leak with a toilet is internal, and while there is no evidence of a leak on the floor, you will see it on your water bill. Sometimes the problem is simply a bad flapper valve and it's quite inexpensive to fix.

When there's a leak, you typically also hear a water running sound. Just like a faucet, or any valve that is frequently opened or closed, proper water pressure is a very important factor in maximizing the useful life of the valve that controls water flow at the toilet tank.

If you see water on the floor at the toilet, the leak could be at the water supply to the toilet tank, at the base where the drain penetrates the floor, or at the connection of the tank to the bowl.

Whether your current toilet leaks or you would like to have a new toilet installed, we provide expert solutions to your plumbing problems.

Toilet Flushing Problems

Due to the EPA regulations requiring toilets having to use only 1.6 gallons of water each flush, many people experience problems with their toilets flushing properly. They find themselves flushing 2 or 3 times and constantly having to use a plunger to unclog the toilet. This is no fun and can be an embarrassment when guests use their bathroom.

Reliable Heating & Air has the answer!

Let Reliable Heating & Air install an American Standard Champion toilet and your problems are gone. Due to a special design and flush valve, this toilets can flush 20 golf balls down in one try! Reliable Heating & Air can install one in your home and flush all your worries away!

Additional Services We Offer

Sewage Ejector Pump Installation- If you plan to have a bathroom in your basement or anywhere that’s below your main sewer line our state licensed master plumbers will determine what type of sewage ejector pump you’ll need and can install it quickly and easily.

In the winter, a properly installed ceiling fan can be used to push hot air down on the occupants of a room providing "free heating" and in the summer the fans direction can be changed to provide enhanced cooling and a higher level of comfort by providing air movement and circulation.

Can I install a fan myself?

Some people feel comfortable performing this type of work themselves, but most homeowners do not like the combination of high voltage electrical wiring, carpentry and ladder climbing that is required to properly install a fan.

A ceiling fan often requires a new electrical box to be installed and mounted to a roof truss and if it is not secured properly, it could fall due to the weight and movement of unit. Reliable Heating & Air electricians are trained to securely and properly mount fans so you can be assured of a safe installation.

Do I purchase my fans from Reliable?

Good

Assessment (Free) – What Occurs?

Educating the Home Owner: BPI Certified Technician explain how a house works – and the whole-house approach to comfort issues.

Visual Inspection:

Attic bypasses, insulation levels, health and safety issues, duct inspection

Living space comfort issues

Crawl space / basement bypasses, insulation levels, duct inspection, health and safety issues

Best

Audit ($450 for two-system homes) – What Occurs?

Includes Everything Listed for the Assessment Plus:

Scientific Diagnostic Tests:

Blower Door Testing (tests air leakage of the house)

Duct Blaster Test (tests air leakage of the ducts)

Carbon Monoxide Tests (on all gas appliances)

Written Detailed Report Provided (findings, plus resolutions and efficiency of the home compared to other homes)

Natural gas is also one of the most efficient fossil fuels.  It’s easily ignited and produces larger amounts of heat per unit of fuel than most other fossil fuels.  This is why it is widely used as a fuel source in America.  Safe Gas Indiana indicates that 63 million homes in America (52% of American homes) use natural gas.

Natural gas is colorless and odorless.  You can’t see it or smell it.  So gas leaks would go undetected if it was not odorized.  Gas distributors put a chemical in natural gas called ethyl mercaptan that gives off a strong rotten egg odor.  This is to warn people that gas has leaked.  Leaking fuel gas is a problem.  Remember how efficient natural gas is?  That means a little bit of loose natural gas can cause a lot of damage if it finds an ignition source.

That doesn’t mean that natural gas is any more dangerous than any other fuel.  Remember the purpose of any fuel is to be ignitable.  Any loose fuel in your home presents a hazard.  Regular maintenance of all fuel-burning appliances is an outstanding preventative measure that will help guard against leaks or failed appliances.

There are some things you should do if you smell that rotten egg odor in your home from leaking natural gas.  These tips are courtesy of Avista Utilities.

Don’t cause any ignitions.  Don’t smoke, light matches, use any phones or switch any appliances (on or off).  Any of these actions can cause a spark that could ignite fuel and you want to avoid that if you suspect a gas leak.

Get everyone outside as soon as possible.  Keep them out until a gas company technician tells you it’s safe to re-enter the building

Open windows and doors to the outside on your way out, if possible.  This allows the gas to escape your home and it keeps fuel from being bottled up, which makes ignition worse.

Call 911 and then your gas company from outside of the house.

1. Changing Indoor Temperatures

If the indoor temperatures of your home are constantly changing, that's a sure sign that your crawl space and attic insulation should be replaced. Oftentimes, this is due to insulation that has shifted in the attic areas and is allowing cold air or heat into the home, sabotaging the heating and cooling system's attempts at regulating the indoor temperature. Simply resetting the insulation and adding additional batting can sometimes easily rectify such problems. However, in many cases, replacement is required.

2. High Energy Bills

High energy bills are a symptom of poor attic or crawl space insulation. Inadequate insulation or a complete lack of insulation in the attic and crawl space areas causes the outdoor weather temperatures to sneak into your home. In summer, the air conditioner must work twice as hard. In winter, the heater has to clock overtime hours to keep your home at a comfortable temperature. In both of these cases, energy costs rise dramatically.

3. Animal Infestation

If squirrels, rats, mice, snakes, opossums, or bats have made your attic or crawl space their latest residence, it's time to replace your insulation. The last thing you want is to evict the critters only to find that they've left feces and grime all over your insulation. It's also possible that some pests have left babies hidden in the insulation. Even if you don't see any evidences of animals in your attic or crawl space, it is important to inspect your insulation for traces of these little rascals.

4. Wet Insulation

If the insulation become moist, damp, or sopping wet, there is no salvaging the material. It must be replaced immediately. Blocked vents, a leaky roof, a basement flood, or the absence of vapor barriers can cause crawl space or attic insulation to get wet. Not only can wet insulation grow mold that releases dangerous mycotoxins in to the air, but the moisture causes the insulation to become ineffective. The tiny air pockets that are instrumental in trapping the air and maintaining the temperature are plugged with water, rendering the insulation useless.

5. Indoor Drafts

Lint and other debris can build up in your dryer hose and vent duct, reducing air flow, backing up exhaust gases and eventually creating a fire. These hazards can be avoided by thoroughly inspecting and cleaning your dryer vent every year. (This is particularly true if your dryer vent duct was not designed or installed properly.) Not only are you reducing the risk of fire, you’re also putting money back into your wallet by improving the dryer’s efficiency.

So how do you know if your dryer vent system is a ticking “time bomb”? Check out our list below of 5 Warning Signs that it’s Time to Clean Your Clothes Dryer Vent.

1. Drying time for clothes takes longer and longer.

When a dryer vent is clogged, the drying cycle can double or triple in time.  You’ll notice that clothes are not completely dry at the end of a regular cycle. A dryer is designed to push out the hot moist air for clothing to dry. If your vent is blocked by lint, the air will stay in your dryer keeping your clothes hot and moist. And when it takes twice as long to dry clothes, your dryer runs longer, putting more wear and tear on it and therefore cutting the machine’s life in half.

2. Your clothing and the outside of the dryer are very hot.

Do you notice that your clothing is very hot at the end of a cycle or the dryer is hot to touch? This warning sign means the vent is not exhausting properly. If your system is clogged, it not only wastes energy, but can cause the heating element and blower in the dryer to wear out faster.

3. You notice a burning smell.

When you run your dryer do you smell a burning odor? Lint, which is very flammable, can build up in the exhaust tube, lint trap and even in the drum casing. If it gets too hot, it can catch on fire, causing a burning smell. (Remember to empty the lint trap often). Discontinue use of your dryer and have it inspected as soon as possible.

4. The vent hood flap doesn’t open properly.

Another visual red flag that you’re due for a cleaning: You can see lint or debris around the dryer hose or outside vent opening: or the duct hood flap does not open as it is designed to do. An outside vent that doesn’t open when the dryer is running means air flow has been restricted due to lint buildup.

5. It’s been longer than a year since your last inspection.