Mohrigan Cosplay Tutorials

Dragon wings tutorial

*sorry for my English* This wings took me about 2 days.

1. I took my height measurment and opened a file on Photoshop and drew the wings pattern the size I wanted them.

2. I printed the pattern.

3. Made the skeleton with wire.

4. I used news paper and masking tape to make the base And added copper wire to make it stronger and prevent it from wigeling.

5. Made the spikes out of Eva foam.

6. Covered the wings with cloth mache to give that skin texture.

7. For the wings skin I used craft foam and used head to give the wavy effect.

8. Painted it. (i ha to remake the harness since the first one was to big. Second one was way smaller and I could. Wear it with the chest piece on top)

9. For the harness used one belt under the chest and shoulder straps.

Super lightweight horns!

You can find this foam in a roll at Wal-Mart.

1. Trace the patterns 3 times For each horn in the foam.

2. Cut them and glue them together. You can use the spray glue or the same I use to cover the horns which in my case is barge cement.

3. Give the shape you want. I used sissor and to add more details a wood burner tool.

4. Once you have your shape cover is in barge cement or contact cement and let it dry for a while.

5. Paint it and you are done!

I just tried this and I loved it!!

I was thinking of using acrylic for this since I plan adding LED to it but I didn’t find where I live and I didn’t want to order it because wouldn’t make it in time sooo I decided to use an orange juice can for this. Very easy to make!

1. Cut it. 2. Shape it. 3. Use a 120 sandpaper to give that effect you see in the pics!

and done :)

Armored Shoes

My page: www.facebook.com/m.cosplay

1. Wrap the shoes with plastic wrap (Saran Wrap).

2. Cover it with masking tape and make the patterns, then cut them.

3. Glue them to the shoe. I used to use hot glue but they will end up falling so now I use barge cement and it works very well.

4. When you get everything on place cover it with 2-3 layers of Mod Podge. Claws are made of eva foam and they were sculpted with a dremmel.

Armor painting tutorial

This is my first video  I ever made cosplay related! I hope you enjoy it! Sorry for the quality!

Kotal Kahn Headpiece Process 

 My page: www.Facebook.com/m.cosplay 

 Note: I started in foam because I wasn't sure if three worbla was going to arrive on time but it did and I just added it on top. 

 1. That's how make my helmet patterns since I don't have a cast of my head. It's kinda hard but got used to it. You sure can find an easier way! 

 2. Draw the pattern into the Eva foam. 

 3. Glue them together with barge cement. If you never heard about it you can get it online or get contact cement in Home Depot. How it works? Use the brush it has to apply it on each side you want to glue together (don't out a lot just I small layer) let it dry for like 3-5 min then out them together. 

 4. Add details with craft foam. 

 5. In my case like I explained worbla arrived a lol late so I had o add it on top of it. So I finished my details with worbla. 

 6. Lines details were made with wood burner tool. 

My page: www.facebook.com/m.cosplay

I’ve gotten a lot of questions as to how I improved my cosplay making ability so rapidly and how I manage to complete them so quickly - here I will give you some tips on what has worked for my development and hopefully they will help you improve yours with time!

1.       RESEARCH & LEARN

Consider EVERYTHING; tools, materials, how you can utilize them for your cosplay, where you can find them, prices, process, etc. Anything at your disposal or otherwise.

Read up on tutorials as much you can; even if you think it is not going to benefit your cosplay. You’ll be surprised how many techniques are interchangeable and worthwhile just to learn, acquire and understand. It may come in handy with future cosplays.

Actively participate in cosplay communities and social networks. Try to join cosplays or costume making forums like RPF. They post progress, tips, and advice that can extend your knowledge and understanding.

2.       ATTEMPT & MAKE MISTAKES

Don’t be afraid to try new things, every mistake is one you can learn from and improve on. Beyond technique, you will also develop your product intelligence— this is an understanding of what material and brand to decide on and crafting technique; as well as more fine tuning measurements such as weight.

Start a new technique small. Using a smaller amount of materials will give you the practice you need without the hit to your wallet if things didn't go according to plan.

Patience is key. You’re not going to become an Ambassador of cosplay overnight. It will take you a few tries before you achieve what you’re after. I understand it can be frustrating, so don’t be afraid to put a project on hold to work on another. Keep that flare alive and burning.

3.       FOLLOW OTHERS

Of course I follow those with work I love, but personally, the most defining factor under my decision criteria are WIP updates. These show aspiring cosplayers many techniques they may not have thought of beforehand without requiring tutorial or mentoring interaction. 

Cosplayers who DO interact with their fanbase; taking their time to answer questions from other cosplayers, have a special place in my heart.

Cosplayers who invest their time and resources into developing the skills of others through literature or video mediums. Digital books especially, BUY THEM! I buy every cosplaying book I come across and have found each to provide a unique learning experience.

And of course, follow what inspires you!

4.        CHALLENGE YOURSELF

Don’t go easy on yourself! Look for challenging cosplays. I try to make every one of my projects more difficult and demanding than the last. But be realistic; remember to act within budget and not go overboard. Don’t tackle a cosplay you can’t afford and try to budget down the required materials and tools; or a cosplay you can’t dream of being capable of just yet— it will leave you frustrated.

5.       HOW TO GET IT DONE FAST

Others often comment that my cosplays are completed unreasonably quickly. My longest cosplay took me a  month and a half (Rengar) but back then I didn't have a job so I could work every hour every day on it. However, now that I’m employed, I haven’t found it slow down my work all that much. So here’s some advice that works for me:

Focus 100% on the cosplay. I prefer working with music and using my phone or computer only for references— you’ll know what works for you. Avoid procrastinating; texting and wasting time online and that goes for over-frequent progress pics. Update your WIP during dedicated breaks only.

Prepare and organize your references beforehand in some sort of folder system. This will save you  time looking it up again.

Amazing and helpful cosplayers!

These are some of the cosplayers I follow and learn from. I won’t list all of them but here are the first few who come to my mind.

BOOKS TO BUY 

Kamui Cosplay Store

WM Armory

YOUTUBERS

Evil Ted

Kinpatsu Cosplay

DaFrontline Trooper

Kamui Cosplay  (my top inspiration)

DemonWeasel1990

MNCProps

WIP MASTERS

PR Props

Alyson Tabbitha

Gyakuyoga

WM Armory

Vensy Props

Ashari Cosplays and Props

Element Cosplay

Kitnip Cosplay

Bonnies Cosplay 

Pizoobie

Moderately Okay Cosplay

MORE TALENT AND INSPIRATIONS

Orobas Cosplay

Danielle Beaulieu 

Missyeru

Zack The Ripper Cosplay

Issabel Cosplay & Other

Glory Lamothe

Jodeci FM - The Cosplay Channel

NightSRok

Skull with free formMy page: facebook.com/m.cosplay Hello all this is the first time I work with free form and gotta say its amazing! Also its easy to use and its super lightweight! I got it from reynolds advance around $30 and it have a nice amount to use since you have part A and B. 

1. Cut the shape of what you want in cardboard. 

2. Get the same amount of part A and part B and mix it well. 

3. Start shaping whatever you gonna make on the cardboard.

4. Sand it. (Details of teeth were made with dremmel ) 

Mask Casting Tutorial

Made for my Darksiders II Death cosplay

*My English is not the best but I always try to explain it the best I can, apologize if any errors.*

My page: www.facebook.com/m.cosplay

Materials Used

Oil Base Clay | $9 2lb

Rebound 25 | $30 Trial Size

Free Form | $25 Trial Size

Smooth Cast 300 | $25 Trial Size

Thi Vex | $3.08 

Mineral Spirits | $12

Female Head | $60

Primer | $1-4

Acrylic Paint | 95c

http://www.reynoldsam.com

Sculpt the design you will use.

When you finish sculpting to make the clay look smooth and take away your finger prints use a little bit of mineral spirit. Can be with a brush or sponge.

When you complete your sculpt prepare Rebound 25 (with no thi vex) and use a brush to apply it (this layers will be thin) , tap it with the brush so it can get all the details sculpted. (apply every next layer when its tacky)

Pour some rebound 25 in a plastic paint palette to make the keys.

Apply 4-5  layers doing the same WITHOUT thi vex.

In the last layer of rebound 25 make at least 4 oz of A and 4 oz of B. If you want you can make more but it depends what size is your sculpt. Then when you mix them together start applying thi vex to the mix till it get like a paste. Use an ice cream stick to apply it. At the end start sticking the keys when you finish applying the rebound paste.

When the rebound its completely dry use free form to make the base.

When the free form its dry you can take everything out and clean the clay inside and cut the excess of the silicone. Make sure every time you take out the silicone put the keys in the right place.

Prepare the Smooth cast 300 same measurement A and B mix it and pour it in the mold and slush it around. MADE THIS STEP around 4-6 time. Here can see and example https://www.youtube.com/watch?v=k6DEPBP4lWM

When you done with smooth cast step take out the mold clean it if necessary cut any excess with a dremmel and then use apply primer.

Casting Props Tutorial

Please forgive my English if have some errors, I try my best to explain all the steps!

My page: www.facebook.com/m.cosplay

My senpai class by PR Props full credit to him!

HIS INSTAGRAM: i.instagram.com/pr_props  CHECK HIM OUT

NOTE: Every material used here can be found at Reynolds Advanced or online in smooth on. Insulation foam in Home Depot

 1. Use sculpting clay non drying and based oil one to sculpt the piece you want. (horns are made of insulation foam) . 2 pounds of clay cost around $9.

2. When your sculpt is done use Rebound 25 so make the mold (the pink liquid) for this step ill let you a video here since is easier to explain : https://www.youtube.com/watch?v=ZCIO_2J1gF0   Note: Depending what you gonna cast will be a different way to apply the Rebound 25 complete cast or only front. To add the keys (the lil balls ) they are made out of Rebound 25 casted here http://www.hokeypokeyshop.ca/content/images/thumbs/0004436_loew-cornell-plastic-palette-6-well-940b.jpeg (plastic paint palette) you can install them after the 2-3 layers, you put them then add more layers of Rebound 25.

3. To make the support base use Fiberglass (smell is super strong you need protection and work it outside). This is to make the mold strong since Rebound 25 is silicone and  will bend if doesn't have a strong base.

4. Then its ready to cast! This one was made with Smooth Cast 300 here is a Video for better explanation : https://www.youtube.com/watch?v=5w1f6xD77vQ&index=3&list=UUziQh-VtsfKHB4DsjTLyrZg   Horns have layers of smooth cast 300 and sanded. 5. When all good to paint add some primer and paint it !! you are done :D . You can use airbrush , spray or acrylic.

Foamy Leather Effect

My page: www.facebook.com/m.cosplay

1. Get you patter with plastic wrap and masking tape.

2. Paste and cut pattern in foamy twice.

3. Use one for base and another for cutting the wavy strips.

4. Glue them and use 2 layers of modge podge.

5. Use a mop sponge to make the paint effect.

6. Seal the paint w thin layer of modge podge.