Freya Ding

Features:

HLG-100H series is a 100W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-100H operates from 90   305VAC and offers models with different rated voltage ranging～between 20V and 54V. Thanks to the high efficiency up to 93%, with the fanless design, the entire series isable to operate for -40~ +90°C°Ccase temperature under free air convection. The design of metal housingand  IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications.HLG-100His equipped with various function options, such asdimming methodologies, so as to provide the optimal designflexibility for LED lighting system.

Applicatins:

LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp LED greenhouse lighting

Contacts:

Features:

Universal AC input / Full range

Built-in active PFC function

High efficiency up to 90% 

Withstand 300VAC surge input for 5 seconds

Protections: Short circuit / Overload / Over voltage 

Protections: Over temperature (optional)

Cooling by free air convection1U low profile 38mm

Medical safety approved (MOOP level)

Built-in remote ON-OFF control

No load power consumption<0.5W 

All using 105  long life electrolytic capacitors°C

5 years warranty 

Contacts:

Features:

Constant voltage design

Universal AC input / Full range

Fully encapsulated with IP67 level (Note.8)

Withstand 300VAC surge input for 5 seconds

Protections: Short circuit / Overload / Over voltage

Fully isolated plastic case

Cooling by free air convection

100% full load burn-in test

Low cost, high reliability

Suitable for LED lighting and moving sign applications(Note 7.)

2 years warranty 

Contacts:

Feature:

EIB/KNX power supply with integrated choke.

Compact size with 3SU (52.5)mm

3 years warranty

Contacts:

Low cost,high reliability Withstand 300VAC surge input for 5 seconds

Features

AC input 180~264VAC

Withstand 300VAC surge input for 5 seconds

Design against rain splash

Protections: Short circuit / Overload / Over voltage/Over temperature

Cooling by free air convection

LED indicator for power on

Low cost,high reliability

100% full load burn-in test

3 years warranty

Contacts

Features

Universal AC input/ Full range

Built-in active PFC function

Class I or Class II installations

No load power consumption<0.5w

High efficiency up to 94%

protections: Short circuit/ Overload/ Over voltage/ Over temperature

LED indicator for power on

3 years warranty

Contacts:

Description

LCM-40DA series is a 40W AC/DC constant current mode output LED driver featuring the multiple levels selectable by dip switch and the DALI interface with the complianceto IEC62386-207. LCM-40DA operates from 180   295VAC and offers different current ～levels ranging between 350mA and 1050mA. Thanks to the high efficiency up to 91%,  withthe fanless design, the entire series is able to operate for -30   ~+90    case temperature°C°Cunder free air convection. In addition, LCM-40DA is equipped with push dimming and synchronization so as to provide the optimal design flexibility for LED lighting system.

Application

LED  indoor lighting

LED office lighting

LED architectural lighting

LED panel lighting

Contacts

Hangzhou Kulon Electronics Co.,Ltd.

Mobile/Whatsapp: 008618157196639

Tel: 0086 571 8500 3730 / 8500 3733

Fax: 0086 571 8500 3737 QQ:2853053273

Skype: sales43.kulon Website: www.kulon.com

Meanwell Dinrail DRP-240-24 power supply-single output/industrial/Built-in active PFC function/fixed switching frequency at 100KHz.

The Tracer LPLI series lithium battery MPPT solar charge controller combines solar charge controller and LED constant current driver into one unit which is ideal for solar LED Lighting, especially when dimmer function is needed. The advanced Maximum Power Point Tracking charging methods enables the system charging and discharging management to obtain the most radical optimization. Increase the system flexibility, yet lower down the system cost. The features are listed below:

1 Adopt high quality components of ST,IR and Infineon, make sure product using lifespan

2 Wide working environment temperature(-40℃～60℃)

3 Apply to lithium battery

4 Lithium battery self-activating function

5 Lithium battery low temperature protection function

6 Load reduce power automatically

7 Maximum conversion efficiency of 98%

8 Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99.5%

9 Ultra-fast tracking speed and guaranteed tracking efficiency

10 Accurately recognizing and tracking of multiple power points

11 12/24VDC automatically identifying system voltage or user-defined working voltage

12 Digital precision constant current control and the control accuracy are less than ±2%

13 Maximum output efficiency of 96%

14 PV and Load power limitation function

15 The output current can be adjusted among the rated power and current range

16 Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface.

17 Aluminum housing for better cooling

18 Real-time energy statistics function

19 IP68 waterproof degree

20 Long lifespan design，five years warranty

The advanced Maximum Power Point Tracking charging methods enables the system charging and discharging management to obtain the most radical optimization. Increase the system flexibility, yet lower down the system cost .The features are listed below:

1 High quality components, perfecting system performance, with maximum conversion efficiency of 98%

2 Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99.5%

3 Ultra-fast tracking speed and guaranteed tracking efficiency

4 Accurately recognizing and tracking of multiple power points

5 12/24VDC automatically identifying system voltage or user-defined working voltage

6 Digital precision constant current control and the control accuracy are less than ±2%

7 Maximum output efficiency of 96%

8 PV and Load power limitation function

9 The output current can be adjusted among the rated power and current range

10 Without any button, parameter setting via Mobile APP, Remoter Meter and SPP with IR function

11 Aluminum housing for better cooling

12 Real-time energy statistics function

13 Battery temperature compensation function

14 IP68 waterproof degree

Tracer-CN/EM1 series adopts common negative design and advanced MPPT control algorithm, and introduces original dry contact design to achieve the switch of external equipment. The integration design not only replaces traditional electrical design using external relay, what is more can achieve multiple control modes and working modes, it can be widely used in household system, field monitoring and communication station etc.

Feature:

1 Original dry contact design, achieve the switch of external equipment

2 Multiple dry contact control mode, local, remote and cross- network

3 Multiple dry contact working modes: manual control, light ON/OFF, light ON+timer and time control

4 High tracking efficiency no less than 99.5%

5 Peak conversion efficiency of 97.5%, full-load efficiency of 96%

6 Accurately recognizing and tracking of multiple power points.

7 Battery temperature compensation function

8 Real-time energy statistics function

9 RS485 port with industrial standard MODBUS open architecture

10 Fully programmable function via PC software or remote meter

Support software upgrade.

The Tracer BPL series lithium battery MPPT solar charge controller combines solar charge controller and LED constant current driver into one unit which is ideal for solar LED Lighting, especially when dimmer function is needed. The advanced Maximum Power Point Tracking charging methods enables the system charging and discharging management to obtain the most radical optimization. Increase the system flexibility, yet lower down the system cost. The features are listed below:

1 Adopt high quality components of ST,IR and Infineon, make sure product using lifespan

2 Wide working environment temperature(-40℃～60℃)

3 Apply to lithium battery(LiFePO4/Li-NiCoMn)and battery(Sealed/Gel/Flooded)

4 Lithium battery self-activating and low temperature protection function

5 Maximum conversion efficiency of 98%

6 Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99.5%

7 Ultra-fast tracking speed and guaranteed tracking efficiency

8 Accurately recognizing and tracking of multiple power points

9 Digital precision constant current control and the control accuracy are less than ±2%

10 Load reduce power automatically

11 Maximum output efficiency of 96%

12 PV and Load power limitation function

13 The output current can be adjusted among the rated power and current range

14 Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface.

15 Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better

16 Connecting the IOT(Internet of Things) module and Cloud Server monitoring software to realize remote monitoring of the multi-machine system

17 The RS485 connector can provide power supply

18 Aluminum housing for better cooling

19 Real-time energy statistics function

20 IP67 waterproof degree

21 Long lifespan design，five years warranty

MPPT solar charge controller, Tracer-BN series. Based on common negative design and advanced MPPT control algorithm, with die-cast aluminum design for heat dissipation, products in this series are artistic, economical and practical.

With MPPT control algorithm, in any situation, products of this series can fast and accurately track out the best maximum power point (MPP) of photovoltaic array, in order to obtain the maximum solar energy in time, which remarkably improves energy efficiency. With Modbus communication protocol interface, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, caravan system, street lighting system, wilderness monitoring system, etc.

All-round electronic fault self-test function and enhanced electronic protection function could furthest avoid damages on system components resulting from installation errors or system failures.

Feature:

Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.

High quality components, perfecting system performance, with maximum conversion efficiency of 98%.

Ultra-fast tracking speed and guaranteed tracking efficiency.

Accurately recognizing and tracking of multiple power points.

Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.

Wide MPP operating voltage range.

Die-cast aluminum design, ensuring excellent heat dissipation characteristic.

12/24VDC automatically identifying system voltage or user-defined working voltage.

LED indicators showing system status, simple and clear.

Multiple load control modes: manual control, light ON/OFF, light On+Timer and time control.

Support 4 charging options: Sealed, Gel, Flooded and User.

Battery temperature compensation function.

Real-time energy statistics function.

With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.

Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.

Support software upgrade.

MPPT solar charge controller, Tracer A series. Based on common positive design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical.

Feature:

Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.

High quality components, perfecting system performance, with maximum conversion efficiency of 98%.

Ultra-fast tracking speed and guaranteed tracking efficiency.

Accurately recognizing and tracking of multiple power points.

Reliable automatic limit function of maximum PV input power, ensuring no overload.

Wide MPP operating voltage range.

12/24VDC automatically identifying system voltage.

LCD panel display design, dynamically displaying tool’s operating data and working condition.

Multiple load control modes: manual mode, light ON/OFF, light On+Timer and test mode.

Support 3 charging preprogram options: Sealed, Gel, Flooded.

Battery temperature compensation function.

Real-time energy statistics function.

With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.

Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.

 Support software upgrade.

HRP series built-in active PFC function and full range input, complete functions. This power supply with complete protections and safety certificates (UL, CE, CB, EMC, TUV).Power supply High efficiency, long life and high reliability,5 years warranty. This power supply combined with connectors provide a pleasing and imposing aesthetic with a unique and function design that combines modern aesthetics with the power of a high- grade product. Mean well high power AC/DC enclosed power supply range from 75 to 600 watts has been earning supreme customer’s rating for a long time.

ADD series is AC/DC dual single output with Battery charger (USP function) power supply, built-in short circuit, overload, over voltage, battery low protections. ADD series switching power supply cooling by free air convection ; it can operate with air convection under -10℃ through 60℃. This series led driver universal AC input/ Full range; moreover, fixed switching frequency at 45KHz. AD series switching power supply is a very reliable styles, 100% full load burn-in test and 2 years warranty. ADD series AC/DC dual single output with Battery charger (USP function) switching power supply it’s our hot sale items, and no customer complain the quality.

DR series is AC/DC converter DIN rail switching power supply, universal AC input/Full range. DR series led driver can be mounted on DIN rail TS-35/7.5 or 15; in addition, DR series din rail switching power supply have 100% full load burn-in test. DR series din ral power supply cooling by free air convection, no load power consumption<0.5w. DR series led driver have a high using year and 3 years warranty.

Meanwell DR series din rail power supply stabilized 15 to 100 watts, mounting on DIN rail without tools thanks to rail hook with spring washer. The connections are made via screw terminals. These power supplies are protected against overload, overvoltage, overheating and short circuit.