ClockworkPhoebe

For the edits on the face I used 2-part Apoxie Sculpt. I would lightly score the rubber after removing the hair and then gently shape the apoxie to the face. After getting it as smooth as possible I lightly sanded it. The lines on his head and faced were referenced from the Hot on the Trail music video.

The fins were probably the most challenging part. I cut out paper to the sizes I wanted and made marks where I wanted the fins placed. Then I cut pieces of cardboard to size and covered them with a thin layer of apoxie to make them more sturdy and smooth. once the fins were cleaned up I scored the back of the doll and carefully molded the spines to the back. This was very tedious as they tended to not hold in place when the apoxie was still drying. It was also hard to get the spacing right so that the back was still movable/posable. They are not completely accurate to the Spine's but the bases had to be widened so that they would be more sturdy and attach to the back properly. Once everything was dry, I sanded it the best I could and began painting. I used FolkArt acrylic paints and then a glaze top coat. If I were to do this again I would probably have primed the doll first and use spray paints instead so that the layering was more even and smooth.

As I was working on the main doll, I was also working on the guitar. The guitar was made entirely from scratch since I really didn't like any of the doll/model guitars that I found. Most were extremely thin/cheap or not really to scale. I used my own acoustic guitar for scale and then drew out The Spine's guitar as close as I could with the proper dimensions. From there, I cut multiple layers of cardboard until I got the right thickness. The bottom two layers were full, the middle layers were hollowed out in the center, the top layer had the sound hole cut, and an extra layer for the neck was made and rested on top. I glued all these layers together, and like the fins, I covered it all with a thin layer of apoxie. I sanded it until smooth and sculpted in all the extra details such as the tuning pegs, the 20 frets, the bridge, and small pegs to hold the strap. Everything was then painted and glazed. The strap is made from a ribbon and pieces of faux leather glued together with the ribbon sandwiched between them.

The hat was a struggle. I could not find a single hat that was close to the one Spine wears so I tried a few times to make one by hand. In the end they ended up way to heavy/bulky when I tried to make molded ones and I couldn't get them to sit on his head quite right. (I have absolutely no clue how to make a fabric one.) A few months ago I randomly found a hat while shopping that was actually pretty close to Spine's. So I will be using this for now until I can either edit it or make a different one.

For this project the pants, shirt, and vest were all made from scratch. I have no prior experience with doll customizations at all and while I know how to sew, I have only ever sewn plush animals. I have never made clothes or my own patterns. To make my patterns I used the plastic wrap and tape method. This is when you wrap the body with plastic wrap, cover this with tape, and then mark out the pattern on the tape. You can then cut out the pattern and use it to measure out your fabric. This was very tedious since the dolls are so small. The small size made it very difficult to get clean seams and to have the pattern actually line up properly once fitted to the doll. In the images above you'll see that I had to make most of the patterns twice to get it the way I wanted. Another challenge was trying to get the clothes to lay properly around the fins without leaving giant holes in the fabric and without the fins tearing up the fabric around them. I ended up gluing an interface on the insides of the shirt and vest to help keep the fabric sturdy and then glued along the edges of the gaps to keep them from fraying. I ended up finding the shoes I needed on ebay.

Here are more closeup photos of the finished guitar. I also put it next to the guitar I used for its design just to show the size difference.

Here are more pictures of the doll without the guitar and hat.