BPE Group

A flush disposes all the human wastes liquid or solid via the drain pipe into the sewage. Most airports, public toilets as well as in private homes, Automatic flushers can be found in the toilets.

This sanitary method that uses automatic flushing systems has been kept to maintain clean and tidy restrooms so that it is hygienic for people to use. The squat toilets use the automatic flush systems that ensure that all the wastes are flushed out as soon as the person moves away from the pot. Thus, the toilets remain clean and presentable. They do not have any kind of odors from the unflushed remains and eliminates cross contamination. 

It does not take too long to install them in the washroom with no other tools or batteries required for further use. However, if the person has just bought their system, they do not need to worry about changing the entire system again. The device that automatically flushes the residuals is fitted into the existing systems and is, therefore, economical. The touch-free flushing system is the cheapest and the best way to keep the toilets clean and free from bad odor. 

The device uses a sensor which is based on the proximity of the person. These sensors are infrared that manages the entire flushing system. The sensors are located exactly behind the pot, and the automatic flushing system gets activated even if the seat is up.  

So, as soon as the person moves away from the device it automatically flushes the wastes. This Sensor Urinal Flusher is being used in most public toilets to keep them tidy for people to use it for a longer period of time without manual cleaning. The battery needs to be changed after about once in 3 years or maybe after about 60,000 flushes done by the flush automatically.  The motor fits into almost all kinds of the tank and displaces very little water inside. The Automatic Urinal Flusher works in different modes. The first one being the detection of the object where the toilet flushes immediately after the person moves way or waves his hand in front of the automatic urinal sensor. This is the factory setting that is present in default mode when the system is installed initially.  

In the second mode, the toilet flushes with a delay of about 2 to 3 seconds than the normal mode. The third mode activates the flush only when the person waves his hand in front of the sensor. Even though there are some problems with automatic urinal flushing like battery replacements, or not getting a full flush, they can be solved. It is worth having such a system with few difficulties that can be handled to have a clean and hygienic washroom.  The flushing system is highly reliable and also a LED glows when the battery gets low so that the user can replace them.  This efficient system makes the restrooms presentable.

Automatic Sensor Faucet