#automatic pump controller

This is a float valve. And if you have an overhead water storage tank like ours, installing this will make your life so much easier because it can stop overflow for good and you won't need a ladder ever again. I'll explain why and I'll show you how, in a bit. Hey there! This is and if we're just meeting for the first time, HELLO! And my passion is building, fixing, and improving all sorts of stuff at home for my family and sharing with you what I have learned from experience and from others. For the longest time we have endured with this setup where every time we needed to store water, we had to climb a ladder up and down just to reach and turn on a faucet and do it again to turn it off. And yeah, there were many times we had overflows because we were too busy doing something else to monitor the rising water level from start to finish. So today, we're going to do something about that by replacing this hideous faucet with this float valve I purchased online, which will serve as our automatic water level controller. You basically have an inlet here where water comes in and flows out to this spout.

Know More This Product Click Here!

And you have a plastic ball here -- in this case, a cylinder -- that's filled with air. It is attached to an arm that has a valve on the other end which opens or seals the spout, depending on the angle of the arm. As you already know, gas is lighter than liquid. So the idea is: as water rises, it pushes the ball and the air inside it upwards and in turn moves the valve on the other end to slowly seal the spout shut. Conversely, whenever we consume from this tank and water goes downwards, the ball also goes down, opening the valve and once again adding in more water. It also comes with a pivot point with a wingnut. Loosen the nut to adjust the arm to a desired angle which will control how much water it will allow in before it completely seals the spout. If you want to go high-tech there are also electric float switches sold out there but personally, I prefer float valves because they are mechanical, simple to install, and obviously don't require any constant power source and wiring. As much as possible, I like to keep my water and electricity far apart.

Sub Type: Single Phase/Three Phase Pump/Submersible Pump/Without Capacitor/With Capacitor Panel/MCB Type

It start motor by pressing start button of the device and it will automatically switch off motor when the tank full.

Buy Now

Item Specifications :

A brand new unused, undamaged item that is fully operational and functions as intended

Device ON, Motor ON/OFF, Tank full, Tank empty indication provided.

Dry run protection

Warranty: 1 Year Manufacturer

Warranty Service: Repair or Replacement

Operating Voltage: 180V — 270V AC

Output Load Capacity: 0.1 HP Up to 7.0 HP

Digital Time Switch is ideal for street light, glow sign board, garden light, staircase light, motor pump set.

Buy Now

Features:

Auto / Manual Mode

Clock Setting (Real Time)

Time Settings

Hour Adjustment

Min Adjustment

Hard Reset Switch (Press for 10 Sec)

Specifications:

Real Time Clock Based Programmable Timer

Direct Output Control

Load Capacity: 3K Watt (Resistive)

Up to 4 Programs (in 24Hrs)

Operating Voltage (180–250 VAC)

You have to start motor by pressing start button of the panel and it will automatically switch of motor when the tank full.

Sub Type: Single Phase/Single Phase Submersible/Capacitor Panel

Know More

Item Specifications :

A brand new unused, undamaged item that is fully operational and functions as intended

Device ON indication provided.

Warranty: 1 Year Manufacturer

Warranty Service: Repair or Replacement

Operating Voltage: 180V — 270V AC

Output Load Capacity: 0.1 HP Up to 5.0 HP

Size: 50*40*120(W*D*H) mm

Versatile, reliable and ideal for homes, multi storey building, housing complex, hotels, office buildings and industries.

We are the leading ‘automatic water level controller’ manufacturer, distributor & whole seller. We’ve helped thousands of customers from businesses to business as well as business to retail. We’re proud to have built a strong relationship for great prices, great selection, and great quality products. Automatic water level controller buying expertise allows even

the smallest company or individual to enjoy the competitive pricing. We ‘automatic water level controller’ have gained

success in the market by Manufacturing & Whole selling like Water Level Controller, Motor Starter, Water Level Indicator, Digital Time Switch, etc. Our offered products are manufactured in compliance with the pre-defined industry

norms and tested to ensure their flawlessness. We guarantee what we sell. We only sell high-quality and reliable products and are committed to exceeding all industry standards.

https://www.automaticwaterpumpcontroller.com/

Features:

Auto /Semi Auto/Manual

Dry Run Protection

Corrosion Free Sensors

Suitable for Single Phase /Three

Phase Pump/Submersible Pump

Visual Indications

Advanced Embedded Technology

SAVE WATER/ ELECTRICITY

Compact Size

User Friendly

Easy Installation

Zero Maintenance

Specifications :

Operating Voltage: 180V — 270V AC

Output Load Capacity: Up to 2HP

Size: 65*55*170(W*D*H) mm

Automatic water pump controller controls the water pump, and turns it on / off   with respect to the level of water to the tank. Automatic water pump controller with Indicator for pump on / off  reservoir empty / overhead tank full. Pump automatically turn on before overhead water tank empty and turn off once overhead tank full of water.  As well as continuously monitoring reservoir tank also, if water level goes down then motor will automatically turn off. Save electricity, Save water, Save man-power.

For More information click the link below

https://www.automaticwaterpumpcontroller.com/