BattleMace

The Beretta 92FS. My take on the Samurai Edge.

I know it’s not the true model for a Samurai Edge (Beretta Brigadier). But, what makes this one worthy of the grips in my opinion is that it’s a Beretta 92FS Police Special. This one was manufactured in 1996, it bears the “PS” shield on the side. It sports a retired Ontario CA, Police Department Safariland weave holster. Also, I upgraded parts from Wilson Combat and the trigger pull is like a dream. This is definitely one of my favorite pistols. Please enjoy.

New Parts

- DS Grips Samurai Edge grips with extended panels and panel connector.

- Wilson Combat Short Reach Trigger with Reduced Power Trigger Conversion.

- Wilson Combat Lo-Profile Single Safety/Decocker and Oversize Magazine Release (Logo).

- Wilson Combat Steel Fluted Guide Rod with Recoil Spring.

The Second Build *version 2. (Do it right the 2nd time).

This AR-15 was my least favorite out of the ones I own. I never felt comfortable shooting it. The main reason was because of the front. The CAA handguard was just plain heavy up front. Even switching to the lighter Magpul MOE handguard, it still wasn't right. After having thoughts of selling the gun, I research for affordable/lightweight handguards. I stumbled upon ALG Defense's EMR M-LOK free float handguards. At $145.00 shipped for an 15" EMR, I was sold (Even bought another one for my other AR-15). With the extra accessories, this AR-15 has become my favorite. Please enjoy.~

New Parts:

- 15" ALG defense EMR M-LOK with x2 Co-WItness Accessory Rails.

- Vortex Strikefire Red/Green Dot Scope and Magpul MBUS front sight.

- Umbrella Corporation Grip 23.

- Troy Industries Aluminum Modular Combat Grip. (Remove one section).

The Cheap 22 Madness Update~ (Now with a new paint job!)

I really love this AR. It always find itself in one of my rifle bags ready to go whenever I hit the indoor or outdoor range. Besides the 22LR conversion kit and barrel, it was relatively cheap to build as it inherited a lot of spare AR parts and a cheap eBay handguard.

This past weekend, I was bored and threw on my spare PSA OD green M4 stock from Build 1. Curious to see how it would look with other OD green furniture, I visited my local ACE Hardware and picked up a can of Krylon olive Camouflage spray paint. Gave the parts a good wash with laundry detergent, dried it thoroughly, and sprayed away. The color is a bit flat and lighter compared to the OD green stock from PSA. But I’m very satisfied by the new look.

The Pistol Build~

- Upper: 10.5" Aero Precision Barrel, YHM gas block folding front sight & rear sight, Primary Arms Micro Red dot, Strike Industries Mitch handguard, AR Charging Handle & J-Comp FH, PSA Blem Stripped Upper with logo, and AIMS NiB BCG.

- Lower: 80% Lower painted with VHT engine block paint job (Flat black), KNS Zombie Green Mod 2 Pins, PSA classic LPK, Strike Industries Trigger Guard, Umbrella Corp. Grip 23 with cut Hogue grip sleeve, Thordsen Customs Standard Buffer tube Cover with MFT stock saddle.

Truly, this is my most proudest build. This was my first time doing an 80% lower (The cuts aren't perfect but seems functional; I will shoot it soon). I've been in budget thanks to the Memorial Day sales and sniping items last minute on eBay auctions. The only items I paid full price for were the Strike Industries parts (And they are decently priced already!) and the Thordsen Customs Standard Buffer Tube (fits excellent).

After shooting it now for a couple of weeks, I finally got the Cheap 22 Madness to where I want it. You will first notice it now has a S&W M&P-22 magazine. With the Better-Mag adapter, the bolt holds open every time the magazine is finished. Also, these magazines are so much easier to load compared to the stock CMMG magazines. 

I have shot a variety of 22LR brands: American Eagle, Remington, Federal Walmart value pack/Federal Automatch. I won't lie, there were a couple of stovepipes; But infrequent.    

The other week, I stopped by my local gun shop and picked up an ATI Omni Polymer Lower for $34.00 (not including tax/DROS). Now I know many reviewed it questioning its durability and longevity. But for my application and the price, I wanted to try it out. And so behold, my newly assembled dedicated 22LR AR-15.

The Cheap 22 Madness~

-ATI Omni Polymer lower: PSA LPK (Round Hammer), MFT grip, Seeking Blue Magazine Release, & a Cheap eBay Buffer Tube with a leftover PSA M4 Stock.

-Leftover PSA Blem upper: Custom .44 Magnum Forward Assist Plug, CMMG 16" dedicated 22LR Adapter/Barrel, CMMG Polymer Charging Handle, CMMG "Bravo" Conversion Kit, CMMG Bolt Open Adapter, Magpul F/R MBUS, Omega Tactical 12" FF Handguard & YHM 5C2 FH.

First thoughts: I'm very pleased on how it turned out. The only complaint is the Bolt Open Adapter. It seems to works when it wants to even after adjustments. I may switch to the Better-Mag adapter and run S&W M&P 22-15 mags. I'm also waiting for my dust cover to come in.

Conclusion: I'm using a lot of spare parts from other builds. And in my opinion, for the money spent to create this dedicated 22LR AR-15 is more worth it than buying a ready to run 22LR AR-15.

I thought I would share my handgun collection.

No classic duvet background (I got some comments about that haha).

-S&W Model 686-6 6" .357 Magnum.

-S&W Model 586-4 4" Pre-lock .357 Magnum.

-RIA GI "Plain Jane" 1911 45ACP.

-Glock 17 Gen 3 9mm.

-Glock 19 Gen 3 9mm.

-Beretta 92FS 9mm.

The Final Build~    

20" FDE Personally Built AR-15. 

-Anderson Manufacturing Lower & Magpul FDE ACS stock.

-PSA Blem upper: BCM 20" Barrel, Smith Vortex Flash Eliminator, BCM mod4 CH, Rainer Arms NiB BCG, & DPMS upper parts.

-Midwest Industries FDE Gen 2 SS-Series FF HG & Umbrella Corp. Grip 23 painted in Brownells Aluma-Hyde II - Earth Brown.

-Nikon P-223 3-9X40 Scope with Nikon M-223 Scope mount.

Rock Island Armory "Plain Jane" 1911

The Second Build is complete.

"Carbine" Length Personally Build AR-15

-JD Machine "CALGUNS" Lower & Magpul CTR stock.

-PSA Blem upper: ARStoner 16'' Barrel, YHM 5C2 FH, BCM mod4 CH, WMD NiB BCG, & SAA upper parts.

-CAA XRS6 6-rail HG, Magpul AFG2 & MFT EPG16 grips.

-Bushnell TRS-25 & Magpul MBUS.

Glock 17 Gen 3 

-Truglo TFO sights

Mid-Length Personally Built AR-15

-Aero Precision Lower & PSA M4 style stock with MFT saddle.

-PSA Mid-Length Upper.

-Magpul OD green furniture/accessories & Hogue grips.

-Nikon P223 scope.

Police Retired Beretta 92FS

Cheap guns that shoot so well.

I have something special.

38 specials :) . Just finished reloading 100 rounds. Took me about 3 hrs on a single stage press. (excluding cleaning the brass). 

Load:

Winchester 231: 5.2gr, Berry's 125gr HP, C.O.L: 1.440ish.

Gun:

S&W 642-2 with Hogue Monogrip: 5-rounds, 1in barrel and double-action trigger.