Hey Jeff, what's a Jake Brake?
Compression release engine brakeFrom Wikipedia, the free encyclopedia
needs additional citations for verification
adding citations to reliable sources
. Unsourced material may be challenged and removed.
Jacobs Engine Brake Division logo.
A view of engine compression brake rocker arm (on the left).
A Jake Brake from Jacobs Vehicle Systems.
A compression release engine brake, frequently called a Jake brake or Jacobs brake, is an engine braking mechanism installed on some diesel engines. When activated, it opensexhaust valves in the cylinders after the compression cycle, releasing the compressed air trapped in the cylinders, and slowing the vehicle.
Although Jake brake properly refers to the Jacobs brand of engine brakes, the term has become a genericized trademark and is often used to refer to engine brakes or compression release engine brakes in general, especially on large vehicles or heavy equipment.
When the driver releases the accelerator on a moving vehicle powered by a diesel engine, the vehicleās forward momentum continues to turn the engineās crankshaft. With the example of Mercedes diesels being a notable exception, diesel engines, by design, have no throttle butterfly in the intake so regardless of throttle setting a full charge of air is always drawn into the cylinder. As such, each time air is compressed in a cylinder virtually 100% of that energy is returned to the crankshaft providing very little in the way of engine braking to the vehicle.
The typical compression release engine brake, as originally developed, uses an add-on Hydraulic system utilizing engine oil. When activated, the motion of the fuel injector rocker arm is transferred to the engine exhaust valve(s). This occurs very near TDC and releases the compressed air in the cylinder so that that energy is not returned to the crankshaft. Energy is now absorbed and engine becomes an excellent ābrake.ā If used properly, this energy can be used by the truck driver to maintain speed or even slow the vehicle with little or no use of the service brakes.
Contrast a petrol engine, where the mechanics are different and a special valve is not necessary for engine braking to happen when the driver releases the accelerator. In a gasoline engine, when the accelerator is released, the throttle prevents the free flow of air into the cylinders, so there is little pressure to release at the top of the compression stroke. The closed throttle provides engine braking by forcing the engine to generate a vacuum between the throttle and the cylinders.
Diesel compression release brake controls consist of an on/off switch and, often, a multi-position switch that controls the number of cylinders on which the brake is active. Throttle and clutch switches are integral with the system. Activation occurs when both the clutch is released with transmission in gear and the throttle is released. It is the driverās job to ascertain the correct transmission gear to use depending on, for example, the steepness of the grade and whether the truck is loaded or empty.
The name is derived from the manufacturer, Jacobs (of drill chuck fame), and was patented 1962ā1965 by Clessie Cummins.[1]
The use of compression release engine brakes may cause a vehicle to make a loud chattering or āmachine gunā exhaust noise, especially vehicles having high flow mufflers, or no mufflers at all, causing many communities in the United States and Canada to prohibit compression braking within municipal limits. Drivers are notified by roadside signs with legends such as āBrake Retarders Prohibited,ā āEngine Braking Restricted,ā āJake Brakes Prohibited,ā āNo Jake Brakes,ā āCompression Braking Prohibited,ā āLimit Compression Braking,ā āAvoid Using Engine Brakes,ā or āUnmuffled Compression Braking Prohibited,ā and enforcement is typically through traffic fines. Such prohibitions have led to the development of new types of mufflers and turbochargers to better silence compression braking noise.
Jacobs claims that the use of the term āJake Brakesā on signs prohibiting engine retarding brakes violates their trademark and discriminates against Jacobs brand products.[2][3]
Retarder (mechanical engineering)
Jump up^ US Patent # 3,220,392, filed June 4, 1962, issued Nov. 30, 1965; http://files.asme.org/ASMEORG/Communities/History/Landmarks/5577.pdf
Jump up^ āJacobs Vehicle Systems - Noise Concernsā. jake-brakes.com. Retrieved August 20, 2012.[dead link]
Jump up^ Zolkos, Rodd (February 28, 2000). āRoad signs violate trademark; Municipals urged to stop using āJake Brakesā brand nameā. Business Insurance. Crain Communications Inc. Retrieved August 20, 2012 ā via HighBeam. (subscription required (help)).[dead link][dead link]
Pacbrake Engine & Exhaust Brakes
Banks Power exhaust brake page
Sound & video of a truck using a compression release engine brake
Video comparing the noise a truck makes using a compression release engine brake with and without a muffler
Vehicle braking technologies
This page was last modified on 19 July 2015, at 10:52.
Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. WikipediaĀ® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.
romaincrisis
vaporwave
areudirty
titsay
origamiaround
kianamaiart
