Bottling Equipment Specialist for Filling & Packaging Industry

Monobloc Filling Machine: This machine is of  complete function for wine bottling, integrating rinsing, nitrogen injecting, filling, corking sealing in one unit. ●  Lifting insert rinsing design, the rinsing nozzles can be inserted into bottles 100mm to achieve rinsing effect. ●  No bottle, no nitrogen filling, and nitrogen supply shut off automatically ●  No bottle no filling, no bottle no air sucking. ●  Nitrogen protection device in the tank to protect the liquid from oxidating. ●  Cork residue sucking- air vacuuming-nitrogen filling- air vacuuming. ●  After air vacuuming, the pressure of bottle inside can be reach -5Kpa~-20Kpa. ●  Corking squeezing device adopts independent squeezing head to ensure the high corking quality. ● The sealing wheels are made of special material and produced by special process with perfect arc, high hardness, good wear resistance and long service life.

 Performance: •  Low vacuum filling: avoid the foaming and leaking, and if there is defects in the bottle, filling will not be started. •  Spraying filling: Liquid flows down along the sides of the bottle, ensure the filling quality. •  No bottle broken: bottle hold devices can flexibly adjust bottle location, avoiding any possible bottle damage or even machine damage. •  Long service life and easy maintenance.

Performance: •  Bottles are loaded and unloaded on the same side of the machine and are transmitted by six wheels. •  The machine is equipped with a water tank and water pump. Bottles are washed twice by circulated water and once by clean water, which can wash bottles effectively with less water usage. •  The bottle support device in this machine was designed to ensure high-pressure jet of water sprayed into the bottles accurately. •  The exposed parts of the machine and any parts contacting liquid directly are made of stainless steel and nylon to meet food hygiene standards.

▪  The robot being equipped with correct clamp catcher. ▪  Reduce pitch time. ▪  High precision running. ▪   Less land occupation and higher output. ▪  Lower cost, higher production efficiency. ▪  Easier and faster programming.

Performance: ▪  This machine is used to screw and seal the plastic caps on bottles ▪  The capping head adopts magnetic torque structure to avoid breaking the bottle and cap. ▪  Equipped with bottle mouth positioning device to seal cap on bottle correctly.

Performance: ●  This machine is used to seal the aluminum foil caps onto bottles ●  The bottle support device is flexible, easy operate and maintain. ●  Easy-to-change backup parts for bottle cap roller. ●  Different bottle top and neck diameters could be suitable on similar machines by doing small adjusting on the rollers. ●  Rolling result could be perfected by slightly modifying the rollers. ●  The bottle support device is flexible, easy operate and maintain. ●  Bottles with different heights can be used in this machine. ●  Equipped with overload clutch protection device to protect bottles and the machine.

Performance: •   This machine is mainly used to automatically wash glass bottles and PET bottles. •   Rinsing nozzles are inserted automatically into bottles, so that water can be spray into the bottoms of bottles. •   External washing device uses a pump to spray water on the outside of bottles. •   The sterile compressed air is blew into bottles to remove the water left in washing processes. •   This machine works with a circulated water tank and pressure pumps. It can wash bottles effectively with less    water usage. •   The cold water, hot water, recycling water or alternating hot and cold water can be used to wash bottles.

This carton erecting machine is applicated in bottle packaging production line to form half-finished cartons and seal the bottom for packaging later. It could be widely used in food, medicine, beverages, tobacco, cosmetics, toys, electronics and other industries. All above make this machine an essential equipment for automated mass production. It can be Widely used for automatic box back of different sizes of cartons, as it could complete carton suction, carton unpacking, forming, bottom folding, bottom sealing and other packaging processes at one time. Equipped with security protection device to protect the operator and the machine, and the machine will give warning if it doesn’t detect the carton or tape. High efficiency and low cost can meet your requirements for the machine.

The labeling machine applicable for flat bottle, square bottle, round bottle and other packaging container to be labeled by wrap-around label, front label, back label or neck label. The labeling head can be 8 dimentionally adjusted, the cone type bottle can be labeled easily by adjusting the labeling head manually. It is equipped with servo motor and PLC controller, achieves high labeling accuracy.The positioning labeling function can be easily achieved for round bottles in linear labeling machine.

Automatic Filling Packaging Line For Liquid, Filling Packaging machines...

Filling Machine Packaging Machine Disinfectant Filling Line Disinfectant...

Washing N₂Injecting Filling Corking and Capping Machine, CBB Fair

3000BPH Wine Filling Line

●  Lifting insert rinsing design, the rinsing nozzles can be inserted into bottles 100mm to achieve rinsing effect. ●  No bottle, no nitrogen filling, and nitrogen supply shut off automatically ●  No bottle no filling, no bottle no air sucking. ●  Nitrogen protection device in the tank to protect the liquid from oxidating. ●  Cork residue sucking- air vacuuming-nitrogen filling- air vacuuming. ●  After air vacuuming, the pressure of bottle inside can be reach -5Kpa~-20Kpa. ●  Corking squeezing device adopts independent squeezing head to ensure the high corking quality. ● The sealing wheels are made of special material and produced by special process with perfect arc, high hardness, good wear resistance and long service life.

A beautiful day begins

---Since 1992---