Willie Washer

Obtain a quote for a Flat Washer - 0.344 ID, 0.875 OD, 0.310 Thick, Acetal - POM. Willie Washer offers affordable special washers, stampings, and machined parts.

This flat washer features an outer diameter of 0.0900 inches and an inner diameter of 0.0600 inches to meet the needs of your unique application. This round flat washer is assembled with durable 300 Series stainless steel. In addition, this washer does not have a finish. Flat washers are designed to be utilized as shims to accommodate for tolerance adjustments. Round flat washers can be installed in large holes and can balance loads over expansive areas. This type of washer is engineered to prevent damage to sensitive surfaces from nuts and bolts.

Obtain a quote for a Slotted Square Washer - 0.625 ID, 2.000 OD, 0.125 Thick, Low Carbon Steel - Soft, Zinc & Clear. Willie Washer offers affordable special washers, stampings, and machined parts. 

This low carbon steel flat washer is designed to cover large areas to meet the requirements of your application. In addition, our catalog of flat washers are engineered to limit cracks and damage to sensitive surfaces from nuts and bolts. This low carbon steel flat washer features an inner diameter of 0.1280 inches and an outer diameter of 0.1700 inches. The flat washer is equipped with a cadmium finish to ensure durability, longevity, and reliability. 

Obtain a quote for a Flat Washer - 0.265 ID, 0.750 OD, 0.030 Thick, Polyethylene. Willie Washer offers affordable special washers, stampings, and machined parts. 

This spring steel wave spring washer features an outer diameter of 0.7500 and an inner diameter of 0.6300 inches. This wavy washer is equipped with a thickness of 0.0100 inches to meet your requirements. Our selection of wave spring washers are engineered for environments with a small amount of axial space. Wave washers are designed to provide low to medium spring forces in small spaces. This washer does not feature a finish.

Obtain a quote for a Flat Washer - 2.375 ID, 3.625 OD, 0.150 Thick, Spring Steel - Hard. Willie Washer offers affordable special washers, stampings, and machined parts. 

View Our Catalog Of Wave Washers: https://www.williewasher.com/wave-washer-0-120-id-0-203-od-0-008-thick-beryllium-copper.html

View Our Catalog Of Belleville Washers:  https://www.williewasher.com/spring-washers/belleville-conical-washers/belleville-washer-0-535-id-0-875-od-0-060-thick-aluminum-annodize.html

This Wave Washer features an ID of 0.3820 and an OD of 0.6250. The Washer is assembled with durable stainless steel to meet the requirements of your unique application. The Wave Washer includes a thickness rating of 0.0070 to meet your needs.

Belleville disc spring washers are able to achieve extensive forces with short spring lengths. Conical washers produce little to no movement throughout the compression process. Willie Washer implements strict quality control procedures throughout the manufacturing process to ensure our selection of disc springs do not underperform when subjected to specified loads over an extended timespan.

This type of washer may be utilized to shield large holes in applications where plumbing lines are required. Cup washers can also be used as spring retainers, centering washers, tamper proofing, and as finishing washers. A countersunk cupped washer is engineered to provide insulation for various types of configurations. Contractors make use of these components for support or decorative applications.

Round flat washers are the most common type of washers supplied and they have the most uses. They are used to span oversized holes, and can spread loads over wider areas. They prevent surface damage and embedment from nuts and bolts, and provide a consistent surface for more predictable joints. They can also be used as shims to compensate for tolerance variations.

Cup washers are formed washers that come in a range of styles. We provide a wide array of forms to suit the specific type you need: formed flat-sided cup washers, cup washers with flanges or flat rims to fit into recesses or holes, and even countersunk washers to be used with flat head or oval head screws and bolts. 

Spring washers are used to provide spring forces in assemblies and in tight spaces. They come in a variety of styles and sizes adding differing spring loads to assembled components. These types of washers are also referred to as disc spring washers by experts in the industry. Different disc spring washers are utilized to reduce rattle, consume shock loads, manage assembly tension, and compensate for material reduction or enlargement. 

One wave spring washers (or ‘bowed washers’) work like springs in tight applications, and can provide a wide range of spring loads by changing the various attributes on the part. One wave spring washers compensate for tolerance variations in assemblies. Wave spring washers are also designed to take up end play on shafts, cushion light loads, and reduce noise. 

Two wave spring washers are more common as metric wave washers, but they can be supplied in inch dimensions if necessary. Two wave spring washers feature two contact points, which provide more load and less compression than one wave washers of the same size. Two wave washers are used to reduce rattle or noise in assemblies.