#vxdiag

Problem Description: I purchased VCXDIAG with the Benz license, but unfortunately, it is not working. I booted the system from the hard drive with Secure Boot turned off. I followed all the instructions exactly as described, including uninstalling and reinstalling Benz C6. However, I am getting the same error as shown in the picture.

After that, I ran the included 870.exe, but the error remained. Then I downloaded another 870.exe patch from the VCXDIAG website and executed it as well, but the error is still there. I am unable to read my vehicle, a Mercedes-Benz S-Class W221.

Please advise how to resolve this issue.

Customer question: VXDIAG VCX SE For GM Development programming system (DPS) prompts "No license was installed'", what should I do?

Customer question: When I used vxdiag benz to test the 2006 ml350 w164 car, the DAS had this error.

Solution: Download the 870 patch, put it on the desktop, close the diagnostic software, and double-click to use it.

Problem Description: The VXDIAG VX Manager cannot connect to the Internet, cannot install the driver, and cannot update the authorization.

Solution: 1. Open the network connection menu and find the network adapter that the device is connected to, as shown in the red box:

2. Double-click the network adapter, click Properties, find IPV4, and click it as shown in the figure:

3. Manually change the DNS IP to 8.8.8.8 (as shown in the figure) and click Confirm.

Note: If the VX Manager is still offline after adjusting according to the above method, change the computer network and try again.

Problem description: WIS does not have a hardware ID when registering.

Solution: This is because WIS has been registered on another computer, or the hard disk copy is incomplete, so recopy the hard disk.

Problem Description: After the VX Manager installation, an error message appears on startup: "ERROR: Loadlibrary(VCX.dll) ErrorCode = 1450".

Solution: Uninstall and reinstall the VX Manager software.

Rlink Lite vs VXDIAG VCX SE vs Rlink X7, Which One is Better

In sum:

Rlink X7 supports CAN FD and DoIP protocols. VXDIAG VCX SE only DoIP. If you need CAN FD, need to get new VXDIAG CAN FD device, but it can do only ford and gm at the present.

All these are based on 3rd party drivers. All can be used as J2534 passthru for OEM online programming.

Rlink is not compatible with PSA, Renault, SSM3, Pathfinder, PIWIS II software. VXDIAG does support these softwares.

Rlink X7 and VXDIAG VCX SE allow adding more software licenses to the unit.