You guys wanted MSD. We got it. My mnf Sif's nose holes are pretty shallow so this would sit further away from the lip or closer depending on the depth of the nose holes in other dolls Shown here on my fairyland Tika (left,MSD scale) and my impldoll Vanessa (right,SD scale) We're attempting another 10% scale down but we're fast approaching the absolute limits of the SLA so it may not be possible. Bottom picture is next to millimeters, not inches. -FAQ- *We're designing a few more styles including one non circular designs. *I do not know the final pricing but they will be sold in packs, not as a single piece, it's simply more cost effective this way. They will be very affordable. *Color availability will depend on how easily I can airbrush/dye something this small. While there are other colored resins available, it's not financially feasible at the moment to stock more than 2-3 colors (we only have clear at the moment due to a lack of vat stock. 1 vat per color and everyone is sold out of vatsπ‘) *Metal finishes (gold,silver) may also be available. Again this depends on how well they can take paint. *UV cured resin is much like the doll resin, it's strong but will break if dropped. In the case of these tiny parts, it's not so much of an issue and they are pretty flexible. *You will not need to glue them in. We've designed them in a way that tension will hold them steady, if you want a more permanent application, PVA glue may be used. *We will be selling these via Etsy (see bio for link) *These are laser sintered via SLA (stereolithography) at a 15micron layer height resolution, they are not hand cast. #bjd #abjd #balljointeddoll #dollsofinstagram #dollstagram #bjdsofinstagram #bjdjewelry #bjdaccessories #3dprintedjewelry #3dprinting #peopolymoai #slaprinter #minifee #msd #sdbjd #impldoll