#skylab 1

SCAN AND REMASTERED by Dan Beaumont: link

"Artist's rendering shows how Command Service Module (CSM) will dock with the Orbiting Workshop (OWS) during the Skylab mission. Assisting in the docking is the VHF Ranging System designed and built by RCA Government Communications Systems, Camdem, N.J. The system provides the CMS pilot with the range between the two spacecraft. Ranging is performed by sending radio tones from the CSM to the workshop, which retransmits them to the CSM. The range is determined by measuring the time between the transmission of the tones and receipt of the OWS retransmitted."

Date: May 12, 1973

May 7, 1973 – A double exposure to illustrates the comparative sizes and configurations of the Skylab 1 and Skylab 2 space vehicles at Launch Complex 39, Kennedy Space Center, Florida.

Portraits of all three Skylab Astronaut crews.

The Skylab Airlock flight article 2 lower deploy assembly being loaded into the Guppy, in front of McDonnell Douglas Blg 66 ready, to be transported to the Kennedy Space Center, Florida.

Date: March 22, 1971

Utilization of current hardware for Apollo Applications program, including the Dry Workshop (aka Skylab) and extended Apollo missions to Earth orbit and the moon.

Date: October 14, 1969

"Skylab Airlock Module in clean room

St. Louis, MO - The flight version of the Skylab Airlock Module is shown here in a clean room at the McDonnell Douglas Astronautics Co. Faciliy in St. Louis, MO. The flight Airlock Module is 17 feet long and 10.5 feet in diameter at the top, and weighs about 49,000 pounds.

Note: the Gemini door, inverted at center of picture."

Date: January 27, 1972

The nose cone for the Skylab Workshop (SL-1) at the McDonnell Douglas factory.

Date: January 25, 1972