#rtn980

Huawei RTN980 Configuring MPLS

RTN980 Configuring MPLS

Configuring MPLS Tunnels

Configuring MPLS tunnels, to be specific, static LSPs, is a prerequisite for configuring PWE3 services.

End-to-End Configuration Process

You need to configure NNIs and L2 Link before configuring MPLS Tunnel.

Flowchart

Figure 1 Flowchart for configuring MPLS tunnels in end-to-end mode 

 NOTE:

For MPLS tunnels that have been…

Huawei RTN980 Configuring TDM Services

RTN980 Configuring TDM Services Basic Concepts

Basic Concepts

This section provides links to concepts related to configuring TDM services.

Protection Modes for TDM Services

OptiX RTN 900 supports linear multiplex section protection (MSP) and subnet connection protection (SNCP) for TDM services. OptiX RTN 980 also supports two-fiber bidirectional ring MSP.

Linear MSP

Linear MSP…

Huawei RTN980 Microwave Configuration Example

RTN980 Network Topology of a Hybrid Microwave Chain Network

Configuration Example (Network Topology of a Hybrid Microwave Chain Network)

This example assumes that DCN communication is normal on the Hybrid microwave chain network.

Networking Diagram

The network is a tree network comprising of four hops of microwave links.

Configure the network topology according to the following…

Huawei RTN980 Basic Concept

RTN980 Basic Concept

Basic Concepts

Before configuring the network topology, you need to be familiar with the basic concepts.

DCN

To manage and maintain an NE, the U2000 needs to communicate with the NE through the data communication network (DCN).

On a DCN, the NMS and all the NEs are considered as nodes. The DCN between the NMS and all the NEs is considered as the external DCN,…

open using the HedEx Lite on RTN980

Huawei RTN980 open using the HedEx Lite

Saving a Multimedia File from HedEx Documentation (HedEx Lite)

This section describes how to save a page, including the embedded multimedia file, from HedEx documentation.

Prerequisites

The desired document is open using the HedEx Lite.

[email protected] Procedure

Save the multimedia file in the document.

Huawei RTN 950A Microwave…

multimedia links for Huawei RTN980 feature

RTN980 feature

Multimedia Collection for Features

This section provides multimedia links for OptiX RTN 980 features.

Network management features ItemThumbnailItemThumbnailDCN IntroductionIP DCNL2 DCN–– Microwave features ItemThumbnailItemThumbnailPLALAGATPC–– Ethernet features ItemThumbnailItemThumbnailERPSQinQETH OAM IntroductionQoS IntroductionLTQueue SchedulingCCTraffic…

Huawei RTN980 Product Structure

Product Structure

This chapter describes the system architecture, hardware architecture, and software architecture of the product, in addition to how the system processes service signals.

System Architecture

The OptiX RTN 980 consists of a series of functional units, including the service interface unit, timeslot cross-connect unit, packet switching unit, IF unit, Super EPLA processing…

Huawei RTN980 Native IP Function and QoS

RTN980 Native IP Function and QoS

Native IP Functions

The OptiX RTN 980 supports Native IP functions when using a CSHNU board. The OptiX RTN 980 can serve only as a cell site gateway (CSG).

FunctionDescriptionPublic routing protocolsIntermediate System to Intermediate System (IS-IS)Multi-process IS-IS and multi-AS IS-IS are supported.Open Shortest Path First (OSPF)Multi-area OSPF is…