Our Roofing Machine has high Precession quality. Although there are many suppliers for this machine and many machine factory produce this machine, our company is the is a qualified Producer, Highlly Skilled Staff, After Sales Services. So our company is the best choice for you.
Roll Forming Line with 22 station , 10 H.P. electrical.
Maximum sheet width that can be formed : 1450 mm
Maximum sheet thickness in PPGI/PPGL that can be formed : 0.8 mm
Horizontal distance between shafts : 500mm
Number of forming stations : 22 nos.
Speed of the machine : 22m-25m/min
Size of machine : 32 Feet
Weight of machine Approx : 11 Ton
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
Entry gate will be provided for movement of sheet to roll former.
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.
Hydraulically operated power pack along with cutting die with 3 HP electrical.
