#roofsheetmachine

Our Roofing Machine has high Precession quality. Although there are many suppliers for this machine and many machine factory produce this machine, our company is the is a qualified Producer, Highlly Skilled Staff, After Sales Services. So our company is the best choice for you.

D coiler 5 ton cap.

Entry Gate with

Roll Forming Line with 22 station , 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications

Maximum sheet width that can be formed : 1450 mm

Maximum sheet thickness in PPGI/PPGL that can be formed : 0.8 mm

Horizontal distance between shafts : 500mm

Number of forming stations : 22 nos.

Total HP for Line : 15

Speed of the machine : 22m-25m/min

Size of machine : 32 Feet

Weight of machine Approx : 11 Ton

Mandrel Uncoiler

Coil weight : 5 MT Max

Coil width : 1450 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling

One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Details of Roofing Sheet Roll Forming Machine

A) De coiler 5 ton cap. B) Entry Gate with C) Roll Forming Line with 22 stations, 1 Gear Boxes & 7.5 H.P. electrical. D) Hydraulic Control Panel E) Cutting Unit

TECHNICAL SPECIFICATIONS

Maximum sheet width that can be formed

1440 mm            

Maximum sheet thickness in PPGI/PPGL Strips that can be formed

0.3 To 0.6 mm                              

Horizontal distance between shafts

500mm

Number of forming stations

22 nos.

Total HP for Line

10            

Speed of the machine

0 To 22 mt / mint              

Size of machine

9500 x 1700 x 1100 MM

MANDREL UNCOILER

Coil weight

5 MT Max

Coil width

1440 MM

Coil bore

450 MM min, 510 MM max dia.

Mandrel movement

Manually adjusted

Back Tension

Manually adjusted

Details of Color Coated Roof Sheet Machine

A) D coiler 5 ton cap. B) Punching press 20 tone 2 nos. C) Entry Gate with D) Roll Forming Line with 22 station, 1 Gear Boxes & 10 H.P. electrical. E) Automatic Control Panel F) Cutting Unit (Hydro.)

TECHNICAL SPECIFICATIONS

Maximum sheet width that can be formed 1440mm

Maximum sheet thickness in PPGI/PPGL Strips that can be formed 0.6 mm

Horizontal distance between shafts 400mm

Number of forming stations 22 nos.

Vertical station 7 nos.

Total HP for Line 12.5

Speed of the machine 4mt/minute

Size of machine 9500 x 1700 x 1100 mm

MANDREL UNCOILER

Coil weight 5 MT Max

Coil width 400 MM

Coil bore 450 MM min, 510 MM max

dia.Mandrel movement Manually adjusted

Back Tension Manually adjusted