#repair loop

What is Windows Automatic Repair loop

Automatic Repair is a feature designed to help you fix some PC issues in Windows. But Windows Automatic Repair may fail to work and stuck in diagnosing your PC due to some reasons and go to a blue or black screen of death error.

Tip: If you have essential data on your PC, you’d better recover all the required data before fixing the “Preparing Automatic Repair” error on Windows 10.

RECOVER DATA FROM A COMPUTER THAT STUCK ON A BLACK SCREEN

To recover data on a computer with an error message “Preparing Automatic Repair,” you need to remove the hard drive from the PC and connect it to another one. We recommend that you the Bitwar Data Recovery restore your data. It is an easy-to-use recovery software which supports recovering data due to sudden deletion, formatting, hard drive corruption, virus attack, system crash, etc.

Download and install Bitwar Data Recovery on your Windows 10/8, then follow the guides to recover data.

METHODS TO FIX “PREPARING AUTOMATIC REPAIR LOOP“ ON WINDOWS 10

1. Refresh or Reset PC

You can refresh pc to fix windows 10 preparing an automatic repair loop. Shut down your windows forcefully. Then the system will enter the boot repair page after 2–3 times of reboot. Choose Troubleshoot, then go on to Refresh PC or Reset PC. Restart your PC and check if the issue has been resolved.

2. Disable early launch anti-malware protection

We recommend disabling early launch anti-malware protection. You can do it by using Command Prompt in the Windows Boot Options menu which will appear after restarting the computer several times. Choose Troubleshoot > Advanced Options > Startup Settings. Your computer should now restart and give you a list of options, here choose “Disable early launch anti-malware protection.”

3. Perform a startup repair

Some users recommend performing Startup Repair when the laptop is stuck on Preparing Automatic Repair during startup. Insert the Windows bootable drive to your computer and boot from it. Select your language preferences and click on Next. Select Troubleshoot > Advanced Options > Startup Repair.

4. Restore or reset the system

If the “Windows Automatic Repair” loop still exists, please try the last methods — performing a system restore. To do it, in the Windows Boot Options menu, choose Troubleshoot > Advanced Options > System Restore. Follow the Wizard instruction and select the appropriate restore point. Finally, click Finish to restore the system.

What is Windows Automatic Repair loop

Automatic Repair is a feature designed to help you fix some PC issues in Windows. But Windows Automatic Repair may fail to work and stuck in diagnosing your PC due to some reasons and go to a blue or black screen of death error.Tip: If you have essential data on your PC, you’d better recover all the required data before fixing the “Preparing Automatic Repair” error on Windows 10.

RECOVER DATA FROM A COMPUTER THAT STUCK ON A BLACK SCREEN

To recover data on a computer with an error message “Preparing Automatic Repair,” you need to remove the hard drive from the PC and connect it to another one. We recommend that you the Bitwar Data Recovery restore your data. It is an easy-to-use recovery software which supports recovering data due to sudden deletion, formatting, hard drive corruption, virus attack, system crash, etc. Download and install Bitwar Data Recovery on your Windows 10/8, then follow the guides to recover data.

METHODS TO FIX “PREPARING AUTOMATIC REPAIR LOOP“ ON WINDOWS 10

1. Refresh or Reset PC

You can refresh pc to fix windows 10 preparing an automatic repair loop. Shut down your windows forcefully. Then the system will enter the boot repair page after 2–3 times of reboot. Choose Troubleshoot, then go on to Refresh PC or Reset PC. Restart your PC and check if the issue has been resolved.

2. Disable early launch anti-malware protection

We recommend disabling early launch anti-malware protection. You can do it by using Command Prompt in the Windows Boot Options menu which will appear after restarting the computer several times. Choose Troubleshoot > Advanced Options > Startup Settings. Your computer should now restart and give you a list of options, here choose “Disable early launch anti-malware protection.”

3. Perform a startup repair

Some users recommend performing Startup Repair when the laptop is stuck on Preparing Automatic Repair during startup. Insert the Windows bootable drive to your computer and boot from it. Select your language preferences and click on Next. Select Troubleshoot > Advanced Options > Startup Repair.

4. Restore or reset the system

What is Windows Automatic Repair loop

Automatic Repair is a feature designed to help you fix some PC issues in Windows. But Windows Automatic Repair may fail to work and stuck in diagnosing your PC due to some reasons and go to a blue or black screen of death error.

Tip: If you have essential data on your PC, you’d better recover all the required data before fixing the “Preparing Automatic Repair” error on Windows 10.

RECOVER DATA FROM A COMPUTER THAT STUCK ON A BLACK SCREEN

To recover data on a computer with an error message “Preparing Automatic Repair,” you need to remove the hard drive from the PC and connect it to another one. We recommend that you the Bitwar Data Recovery restore your data. It is an easy-to-use recovery software which supports recovering data due to sudden deletion, formatting, hard drive corruption, virus attack, system crash, etc.

Download and install Bitwar Data Recovery on your Windows 10/8, then follow the guides to recover data.

METHODS TO FIX “PREPARING AUTOMATIC REPAIR LOOP“ ON WINDOWS 10

1. Refresh or Reset PC 

You can refresh pc to fix windows 10 preparing an automatic repair loop.

Shut down your windows forcefully. Then the system will enter the boot repair page after 2–3 times of reboot. Choose Troubleshoot, then go on to Refresh PC or Reset PC. Restart your PC and check if the issue has been resolved.

2. Disable early launch anti-malware protection

We recommend disabling early launch anti-malware protection. You can do it by using Command Prompt in the Windows Boot Options menu which will appear after restarting the computer several times. Choose Troubleshoot > Advanced Options > Startup Settings. Your computer should now restart and give you a list of options, here choose “Disable early launch anti-malware protection.”

3. Perform a startup repair

Some users recommend performing Startup Repair when the laptop is stuck on Preparing Automatic Repair during startup. Insert the Windows bootable drive to your computer and boot from it. Select your language preferences and click on Next. Select Troubleshoot > Advanced Options > Startup Repair.

4. Restore or reset the system

If the “Windows Automatic Repair” loop still exists, please try the last methods — performing a system restore. To do it, in the Windows Boot Options menu, choose Troubleshoot > Advanced Options > System Restore. Follow the Wizard instruction and select the appropriate restore point. 

What is Windows Automatic Repair loop

Automatic Repair is a feature designed to help you fix some PC issues in Windows. But Windows Automatic Repair may fail to work and stuck in diagnosing your PC due to some reasons and go to a blue or black screen of death error.

Tip: If you have essential data on your PC, you’d better recover all the required data before fixing the “Preparing Automatic Repair” error on Windows 10.

RECOVER DATA FROM A COMPUTER THAT STUCK ON A BLACK SCREEN

To recover data on a computer with an error message “Preparing Automatic Repair,” you need to remove the hard drive from the PC and connect it to another one. We recommend that you the Bitwar Data Recovery restore your data. It is an easy-to-use recovery software which supports recovering data due to sudden deletion, formatting, hard drive corruption, virus attack, system crash, etc.

Download and install Bitwar Data Recovery on your Windows 10/8, then follow the guides to recover data.

METHODS TO FIX “PREPARING AUTOMATIC REPAIR LOOP“ ON WINDOWS 10

1. Refresh or Reset PC

You can refresh pc to fix windows 10 preparing an automatic repair loop.

Shut down your windows forcefully. Then the system will enter the boot repair page after 2–3 times of reboot. Choose Troubleshoot, then go on to Refresh PC or Reset PC. Restart your PC and check if the issue has been resolved.

2. Disable early launch anti-malware protection

We recommend disabling early launch anti-malware protection. You can do it by using Command Prompt in the Windows Boot Options menu which will appear after restarting the computer several times. Choose Troubleshoot > Advanced Options > Startup Settings. Your computer should now restart and give you a list of options, here choose “Disable early launch anti-malware protection.”

3. Perform a startup repair

Some users recommend performing Startup Repair when the laptop is stuck on Preparing Automatic Repair during startup.Insert the Windows bootable drive to your computer and boot from it. Select your language preferences and click on Next. Select Troubleshoot > Advanced Options > Startup Repair.

4. Restore or reset the system

If the “Windows Automatic Repair” loop still exists, please try the last methods — performing a system restore. To do it, in the Windows Boot Options menu, choose Troubleshoot > Advanced Options > System Restore. Follow the Wizard instruction and select the appropriate restore point. Finally, click Finish to restore the system.

What is Windows Automatic Repair loop

Automatic Repair is a feature designed to help you fix some PC issues in Windows. But Windows Automatic Repair may fail to work and stuck in diagnosing your PC due to some reasons and go to a blue or black screen of death error. Tip: If you have essential data on your PC, you’d better recover all the required data before fixing the “Preparing Automatic Repair” error on Windows 10.

Recover data from a computer that stuck on a black screen

To recover data on a computer with an error message “Preparing Automatic Repair,” you need to remove the hard drive from the PC and connect it to another one. We recommend that you the Bitwar Data Recovery restore your data. It is an easy-to-use recovery software which supports recovering data due to sudden deletion, formatting, hard drive corruption, virus attack, system crash, etc. Download and install Bitwar Data Recovery on your Windows 10/8, then follow the guides to recover data.

Methods to fix “Preparing Automatic Repair” loop on Windows 10

1. Refresh or Reset PC

You can refresh pc to fix windows 10 preparing an automatic repair loop. Shut down your windows forcefully. Then the system will enter the boot repair page after 2-3 times of reboot. Choose Troubleshoot, then go on to Refresh PC or Reset PC. Restart your PC and check if the issue has been resolved.

2. Disable early launch anti-malware protection

We recommend disabling early launch anti-malware protection. You can do it by using Command Prompt in the Windows Boot Options menu which will appear after restarting the computer several times. Choose Troubleshoot > Advanced Options > Startup Settings. Your computer should now restart and give you a list of options, here choose “Disable early launch anti-malware protection.”

3. Perform a startup repair

Some users recommend performing Startup Repair when the laptop is stuck on Preparing Automatic Repair during startup. Insert the Windows bootable drive to your computer and boot from it. Select your language preferences and click on Next. Select Troubleshoot > Advanced Options > Startup Repair.

4. Restore or reset the system

If “Windows Automatic Repair” loop still exists, please try the last methods - performing a system restore. To do it, in Windows Boot Options menu, choose Troubleshoot > Advanced Options > System Restore. Follow the Wizard instruction and select the appropriate restore point. Finally, click Finish to restore the system.