#rebinding

I removed the masking tape as gently as I could, saved the front half of the original cover, and scraped off all the old glue from the spine before putting it back together with like 20 coats of fresh pva glue and some mull, so hopefully it'll last at least another 50 years of heavy usage now.

Remember two months ago when I said I wasn't wild about doing another paperback-to-hardback conversion? Well. More fool me. (I did try and find a sewn hardback to take apart, but apparently this book was not sold as a sturdy hardback. Cue rant.)

I've tried debossing with leather before, so obviously, for embossing, I decided I'd just pick the most complicated design possible. I had to modify the skull a bit--taking out the IX, which did NOT cut well, and I had to make the lines around the glasses thicker.

After several hours of cricut cutting and experimentation, here is the cover pre-leather. (I also had to floss the skull's teeth with an awl to get some fuzz out, which I found very funny.)

Then, leather:

As you can see, I lose a lot of details in the teeth there, so I went around the edges with a heated brass stylus.

I bought a special skull stamp for the spine: it definitely wasn't made for heat, because while it did serve the purpose, it also came with a metal handle which made handling it awkward. (Oven mitts did not give me the necessary amount of dexterity. I ended up sort of wrapping a paper towel around the handle. My cousin has since informed me that we do own fire resistant gloves, but I did not remember this at the time.)

The stamp was also a pain to get even: it had to be at juuuuust the right temperature and pressure, or you'd either get too much or too little, as shown. It was also pretty picky about foil, but the brass color matched the endband cloth and insides best anyway, so that worked out. (White was a definite no.)

The other fun bit of this was doing the edges: I did them with black foil, but as we established in my earlier foiling experiments, that's not the most reliable. I think I got the best results so far on the top, but kept getting flakes on the others. I ended up painting the outside edge with ink, and then foiling on top of that. The bleed onto the pages ended up looking pretty neat, but since I hadn't done it on the top, I didn't do it on the bottom so that it wouldn't look weird on the inside. I'm not sure the foil added as much gloss as I was hoping for so next time I might just do the ink.

Round up of my re-binding project of the Moomins books. I really enjoyed making them, but I'm also happy the project is complete now.

Back and front covers of the each of the books.

While I used some of the designs chosen for the book edition I had bought, I altered pretty much each of them to fit the size needed and/or also have an image on the back cover instead of the solid colour and a summary the published edition had.

The titles are printed with a metal cliché that I had custom made for that another binding and chose to use, instead of going for the full titles of the books. To indicate the volume I opted for dots above the title.

Endbands

I tried to also use the endbands to tie the different books together and picked one thread to be the leather colour or previous book and the others to fit the cover. I'm mostly happy how they came out. Only in the 3. book (where the colour shifts from violet to yellow-orange) the bead looks a bit irregular. Bead on the edge is simply not the endband style meant to be worked in such a pattern. I still like how it came out.

See the individual volumes here 1, 2, 3, 4, 5, 6, 7, 8, 9

This is the metal cliché btw