#post drivers

Which hydraulic post driver can stand up to rocky ridges, steep hill country and soft black soil without slowing a fencing crew down? QuikFence answers that question with five distinct fencing post drivers for sale, each engineered for a different ground condition, post type and machine.

The FencePro range, developed through ongoing research by Farmgear Ltd, is a hydraulic fence post driver built to switch quickly between a tractor and an excavator. The Ultra G3 runs an 11mm wire rope on a 4.8m hydraulic hinging mast with a 300kg block, and the Ultra G4 adds a 350mm ultra glide mast shift with 180mm pulleys for faster, smoother cycle times.

For ground where standard post drivers struggle, the ThunderPro percussion post driver uses jack hammer-style hydraulic power through its Nitro 360 and Nitro 460 models. The Nitro 360 drives a 70mm chisel at 500 to 900 blows per minute on excavators from 4.5 to 6 tonnes, and a new 30-degree side tilt keeps posts plumb on sloping country.

The KingHitter carries the Fairbrother legacy forward through its Active Safety System, pairing a hinged Safety Gate with a Safety Postcap so the operator can stand clear of the strike zone on every single hit.

Skid steer operators get a front-mounted hydraulic post driver in the PostPuncher, which removes the safety risks of rear-mounted post drivers. The PP3 model drives posts up to 305mm wide with a 200kg driving weight, built for machines with a tare weight of four tonnes or more.

For the toughest contracts, the Bryce Suma range, born in Scotland's stony hill country, includes the Profi Max Magnum, generating 81.48 tonnes of impact force from a 500kg hammer through an 8mm wall thickness frame built to last.

Not every fencing job calls for the same kind of muscle. Soft pasture, hard rocky ground, steel posts, or timber strainers all demand different power, and choosing the right hydraulic post driver for the conditions can make or break a job's timeline.

QuikFence stocks a range of fencing post drivers for sale, each engineered for a different type of ground and job size. The FencePro range, developed by Farmgear Ltd, runs from the entry-level Mule through to the Ultra G2, Ultra G3, and Ultra G4, with the Ultra G3 stepping up to an 11mm rope and a 300kg hammer block, 350kg optional, for harder ground, while the Mule V adds an Activeblock hydraulic circuit for faster, rope-whip-free cycles on tractors, excavators, and skid steer loaders.

For rocky or compacted soil, the ThunderPro Nitro 360 and Nitro 460 use percussion hammer technology rather than a drop weight, driving a 70mm or 75mm chisel at 500 to 900 and 400 to 800 blows per minute respectively, with a 30-degree side tilt option for sloping paddocks. Bryce Suma's Scottish-engineered telescopic drivers range from the 500kg-hammer HD2 Super up to the Profi Max Magnum, which delivers 81.48 tonnes of impact force, while the PostPuncher attaches to the front of a skid steer, tele-handler, or mini digger across the PP1 through PP3 models for posts from 200mm up to 305mm in diameter.

Every model in the range is built for the conditions fencing contractors actually face across Queensland and interstate: timber or steel posts, rocky substrate, hilly country, or open flat pasture. Safety is engineered in rather than bolted on, from the PostPuncher's enclosed guard tube to ThunderPro's hammer mechanism that only extends to strike the post, giving operators of any experience level the confidence to run a hydraulic post driver without standing in the strike zone.

Looking for fencing post drivers for sale that can handle anything from open pasture to hard, rocky ground? QuikFence offers five distinct hydraulic post driver models designed for farmers, fencing contractors, and rural operators who need dependable performance across a wide range of soil conditions and project types.

The QuikFence post driver range includes the ThunderPro, PostPuncher, and Bryce Suma - each built for different applications and machinery. The ThunderPro hydraulic fence post driver is available in four configurations: the Nitro 360, Nitro 460, and their Open Jacket counterparts. The Nitro 360 suits excavators from 4.5t to 6t, delivers an impact rate of 500–900 BPM, and operates at 110–140 bar pressure. The Nitro 460 steps up for 6t to 8.5t excavators with an impact rate of 400–800 BPM and a 70mm chisel diameter. Both models attach to tractors, skid steers, mini loaders, telehandlers, and excavators. The KingHitter includes multiple safety features, the Bryce Suma is engineered for heavy-duty applications, and the PostPuncher is designed specifically for skid steer operators.

Need post drivers that actually handle what Australian fencing throws at them? QuikFence offers five purpose-built hydraulic post drivers to match any job, machine, or soil condition.

The FencePro range - developed by Farmgear Ltd through ongoing research and development - covers everyone from the hobby farmer doing a few repairs to the commercial fencing contractor meeting tight deadlines. Models like the Mule V use an Activeblock hydraulic system for maximum hit every time with fast cycle times and no rope whip, while the Ultra G4 brings heavy-duty features including hydraulic legs, replaceable bushes, and an 11mm wire rope as standard.

Not every fencing job calls for the same machine. QuikFence covers the full spread with post drivers built for both contractors and farmers, with options to suit a wide range of ground conditions and project types.

One model comes with configurable options to match different setups, another runs on nitro power as a jackhammer style driver, and one is built with safety features front of mind. For heavy duty work, the Bryce Suma handles the tougher end of the job, while the PostPuncher is designed specifically for skid steers.