#plastic panels

Plastic Wall Panels are a modern solution for upgrading interior and exterior walls with a clean, premium finish. Made using advanced WPC (Wood Plastic Composite) technology, these panels offer the natural look of wood while eliminating common issues like moisture damage, termites, and high maintenance. They are ideal for homes, offices, shops, and commercial spaces where durability and style are equally important.

Key features of Plastic Wall Panels:

Natural wood & marble look designs

100% waterproof and moisture-resistant

Standard panel height: approx. 250 cm

Lightweight structure for easy installation

Suitable for indoor and outdoor use

Low maintenance with long-lasting performance

New Post has been published on http://www.uhozz.com/paint-ceiling-panels-tips-ideas-choosing-right-color.html

Paint Ceiling Panels - Tips and Ideas for Choosing the Right Color

The ceiling cladding is very popular, especially if it consists of wooden panels. Unfortunately, it does not fit in with the new stoneware tiles or furniture or the old ceiling lights have left their mark. Then a renewal or new painting comes into question. The first one costs a lot of money, time and waste. On the other hand, it is relatively easy to delete the unsightly ceiling panels. Depending on the material you should proceed differently – unfortunately, some panels can not be painted. You will find important tips in the article.

Paint ceiling panels – Which material to treat as

Ceiling panels contribute to a cozy atmosphere and can change the overall effect of the room. The ceiling panels are not only sound and heat insulating, they can also make a room appear higher. Under the general term – wood panels, these are made of solid wood and veneered wood fiber boards. Plastic panels emulate the popular wood look perfectly; professionals recommend a coat of paint. Above all, it should firstly be clear what material you are dealing with and to test the coating. A paint coat, for example, should be carefully sanded beforehand.

(adsbygoogle = window.adsbygoogle || []).push();

Paint ceiling panels – plastic and polystyrene panels

There is a risk with the plastic panels that they do not absorb any color at all. In contrast, polystyrene panels can even be painted over with conventional wall paint. Emulsion paint and latex paint are also very suitable for the polystyrene panels. These are characterized by a pore-open surface and after thorough cleaning are already set for new painting. There is even the option to make the ceiling even two-colored – to color joints and panels differently. It is important to mention that the structure of the Styrofoam is a very careful treatment – ornaments and characteristic structure can be damaged when roughened.

Ceiling panels and wall cladding in wood look

As a popular material for ceiling panels MDF is used. It basically consists of pressed wood fibers covered with cover foil or veneer. These are characterized by relatively smooth surface that absorbs heavy paint. Roughen the substrate with fine sandpaper by hand or with the aid of a sander. The already treated ceiling can be painted over with any solvent-free acrylic or latex paint. Do not forget to roast the MDF panels before painting.

Ceiling panels made of real wood in classic white

Real wood panels need a special coat of paint. Because of the paint coating, if one is detected, the surface is completely sanded off. Since this treatment is extremely expensive, you renounce in the future of the paint. For interior rooms suitable glaze, wood wax or wood oil will surprise with excellent results.

Paint ceiling panels – make dark

According to a basic rule of Profimaler, only a previously primed white background allows successful result in exactly selected shade or light color. If you want to prime the ceiling panels with a lighter shade, prime them completely white.

Paint ceiling panels – five important tips

Before you paint the ceiling panels, you must not disregard the pretreatment. Do not paint the ceiling panels without the necessary preparation. Nicotine residues can be deposited on the surface, so you need to thoroughly treat this surface with soapy water – tedious work that will guarantee flawless results.

Paint the ceiling panels and cover the room and furniture with construction foil

For painting panels you need the following materials:

lye

primer

Sandpaper in different grain sizes

Paint in the desired color

duct tape

Paint or polyester putty

Grease and silicone cleaner

Before proceeding with the renovation work, clean up the room in question, cover all windows and doors with building film and get a dust mask and goggles.

The following tools will serve you well when painting:

paint bucket

brush

paint rollers

Edger

Angle or orbital sander

Prepare the ceiling panel before painting

The first step in the preparation of the ceiling panels is grinding. If the panel has already been painted, you must completely remove the old paint. For ceiling panels, the angle or orbital sander are excellent helpers. If veneered panels are used, do not sand too deeply on the edges, as the thickness of the veneer may be between 0.3 and 5 mm.

Fill holes and blemishes on the wooden panels and sand

Existing cracks and holes should be filled after the first coat and then sanded off again. Otherwise, all bumps on the freshly painted surface will be clearly visible. Use putty exactly suited for the material. The plastic polystyrene panels can melt an unsuitable leveling compound. If it is a small damage, you can use paint spatula. With polyester putty you can, for example, smooth veneer surfaces.

Provide a good foundation for successful results

Glue residue is difficult to remove, but an ugly surface will definitely not produce excellent results. Clean the surface with grease and silicone cleaner and allow the cleaning agent to dry. With a dust-binding cloth, you can then wipe the panels. Cover edges and strips with masking tape.

Priming the ceiling panels

Depending on which color system you have selected, you may also want to prime before painting. Some paints include both base coat and top coat. For example, a final topcoat layer has the waterborne acrylic finish. The primer must be evenly applied and allowed to dry.

Paint ceiling panels – insert brush and paint roller

With the wooden panels, you catch the area of tongue and groove. Carefully apply the new coat in small gaps. For the rest of the area use a paint roller. Depending on the color coverage you should apply two to three layers, so that the color can develop its luminosity. If you scratch the panels several times, you must make sure that one layer of paint has already dried before you apply the next one. Apply the clearcoat as soon as the basecoat has dried. If you are not satisfied with the topcoat in some places, you can carefully remove it and paint again. When applying the paint, always brush in the grain of the wood. Paint that you apply across the grain is not evenly distributed. Also, avoid applying too much paint at once.

Paint ceiling panels – ideas for color selection

Ceiling panels give you the opportunity to put the whole room in scene. Old ceiling panels can be redesigned in an intense color. Good condition to the room ultimately not appear cramped, would be a high ceiling. This offers great scope, looks brighter and more spacious. So that the color accents do not appear too striking and irritate the eye, nuances of the same color should find themselves in the room. A colored blanket creates a warm living ambience and the room instantly gets a more modern look. When choosing colors, you can orientate yourself to the ceiling height and your interior. If the furniture is rather dark, a light color will help to visually open the room. The same applies to a low ceiling height. In a light-filled room with high ceilings, even stronger colors fit.

Paint ceiling panels or renew completely – cover laminate

Styrofoam panels have a light wood design and may look better than a white ceiling. The trend is gray wood-like ceiling paneling, which gives the room a slight vintage look. If you want to paint laminate ceiling panels, you need special materials. That is why you should be advised best by the competent specialist staff.

Paint ceiling panels and redesign

However, glazes are only suitable for untreated wood and not for already painted surfaces. The rule here is that the panels can be colored darker, but not brighter. Before overcoating with opaque colors is always a pre-varnish to be applied.

Paper ceiling panels instead of painting

New Post has been published on http://www.uhozz.com/paint-ceiling-panels-tips-ideas-choosing-right-color.html

Paint Ceiling Panels - Tips and Ideas for Choosing the Right Color

The ceiling cladding is very popular, especially if it consists of wooden panels. Unfortunately, it does not fit in with the new stoneware tiles or furniture or the old ceiling lights have left their mark. Then a renewal or new painting comes into question. The first one costs a lot of money, time and waste. On the other hand, it is relatively easy to delete the unsightly ceiling panels. Depending on the material you should proceed differently – unfortunately, some panels can not be painted. You will find important tips in the article.

Paint ceiling panels – Which material to treat as

Ceiling panels contribute to a cozy atmosphere and can change the overall effect of the room. The ceiling panels are not only sound and heat insulating, they can also make a room appear higher. Under the general term – wood panels, these are made of solid wood and veneered wood fiber boards. Plastic panels emulate the popular wood look perfectly; professionals recommend a coat of paint. Above all, it should firstly be clear what material you are dealing with and to test the coating. A paint coat, for example, should be carefully sanded beforehand.

Paint ceiling panels – plastic and polystyrene panels

There is a risk with the plastic panels that they do not absorb any color at all. In contrast, polystyrene panels can even be painted over with conventional wall paint. Emulsion paint and latex paint are also very suitable for the polystyrene panels. These are characterized by a pore-open surface and after thorough cleaning are already set for new painting. There is even the option to make the ceiling even two-colored – to color joints and panels differently. It is important to mention that the structure of the Styrofoam is a very careful treatment – ornaments and characteristic structure can be damaged when roughened.

(adsbygoogle = window.adsbygoogle || []).push();

Ceiling panels and wall cladding in wood look

As a popular material for ceiling panels MDF is used. It basically consists of pressed wood fibers covered with cover foil or veneer. These are characterized by relatively smooth surface that absorbs heavy paint. Roughen the substrate with fine sandpaper by hand or with the aid of a sander. The already treated ceiling can be painted over with any solvent-free acrylic or latex paint. Do not forget to roast the MDF panels before painting.

Ceiling panels made of real wood in classic white

Real wood panels need a special coat of paint. Because of the paint coating, if one is detected, the surface is completely sanded off. Since this treatment is extremely expensive, you renounce in the future of the paint. For interior rooms suitable glaze, wood wax or wood oil will surprise with excellent results.

Paint ceiling panels – make dark

According to a basic rule of Profimaler, only a previously primed white background allows successful result in exactly selected shade or light color. If you want to prime the ceiling panels with a lighter shade, prime them completely white.

Paint ceiling panels – five important tips

Before you paint the ceiling panels, you must not disregard the pretreatment. Do not paint the ceiling panels without the necessary preparation. Nicotine residues can be deposited on the surface, so you need to thoroughly treat this surface with soapy water – tedious work that will guarantee flawless results.

Paint the ceiling panels and cover the room and furniture with construction foil

For painting panels you need the following materials:

lye

primer

Sandpaper in different grain sizes

Paint in the desired color

duct tape

Paint or polyester putty

Grease and silicone cleaner

Before proceeding with the renovation work, clean up the room in question, cover all windows and doors with building film and get a dust mask and goggles.

The following tools will serve you well when painting:

paint bucket

brush

paint rollers

Edger

Angle or orbital sander

Prepare the ceiling panel before painting

The first step in the preparation of the ceiling panels is grinding. If the panel has already been painted, you must completely remove the old paint. For ceiling panels, the angle or orbital sander are excellent helpers. If veneered panels are used, do not sand too deeply on the edges, as the thickness of the veneer may be between 0.3 and 5 mm.

Fill holes and blemishes on the wooden panels and sand

Existing cracks and holes should be filled after the first coat and then sanded off again. Otherwise, all bumps on the freshly painted surface will be clearly visible. Use putty exactly suited for the material. The plastic polystyrene panels can melt an unsuitable leveling compound. If it is a small damage, you can use paint spatula. With polyester putty you can, for example, smooth veneer surfaces.

Provide a good foundation for successful results

Glue residue is difficult to remove, but an ugly surface will definitely not produce excellent results. Clean the surface with grease and silicone cleaner and allow the cleaning agent to dry. With a dust-binding cloth, you can then wipe the panels. Cover edges and strips with masking tape.

Priming the ceiling panels

Depending on which color system you have selected, you may also want to prime before painting. Some paints include both base coat and top coat. For example, a final topcoat layer has the waterborne acrylic finish. The primer must be evenly applied and allowed to dry.

Paint ceiling panels – insert brush and paint roller

With the wooden panels, you catch the area of tongue and groove. Carefully apply the new coat in small gaps. For the rest of the area use a paint roller. Depending on the color coverage you should apply two to three layers, so that the color can develop its luminosity. If you scratch the panels several times, you must make sure that one layer of paint has already dried before you apply the next one. Apply the clearcoat as soon as the basecoat has dried. If you are not satisfied with the topcoat in some places, you can carefully remove it and paint again. When applying the paint, always brush in the grain of the wood. Paint that you apply across the grain is not evenly distributed. Also, avoid applying too much paint at once.

Paint ceiling panels – ideas for color selection

Ceiling panels give you the opportunity to put the whole room in scene. Old ceiling panels can be redesigned in an intense color. Good condition to the room ultimately not appear cramped, would be a high ceiling. This offers great scope, looks brighter and more spacious. So that the color accents do not appear too striking and irritate the eye, nuances of the same color should find themselves in the room. A colored blanket creates a warm living ambience and the room instantly gets a more modern look. When choosing colors, you can orientate yourself to the ceiling height and your interior. If the furniture is rather dark, a light color will help to visually open the room. The same applies to a low ceiling height. In a light-filled room with high ceilings, even stronger colors fit.

Paint ceiling panels or renew completely – cover laminate

Styrofoam panels have a light wood design and may look better than a white ceiling. The trend is gray wood-like ceiling paneling, which gives the room a slight vintage look. If you want to paint laminate ceiling panels, you need special materials. That is why you should be advised best by the competent specialist staff.

Paint ceiling panels and redesign

However, glazes are only suitable for untreated wood and not for already painted surfaces. The rule here is that the panels can be colored darker, but not brighter. Before overcoating with opaque colors is always a pre-varnish to be applied.

Paper ceiling panels instead of painting

New Post has been published on http://www.uhozz.com/paint-ceiling-panels-tips-ideas-choosing-right-color.html

Paint Ceiling Panels - Tips and Ideas for Choosing the Right Color

The ceiling cladding is very popular, especially if it consists of wooden panels. Unfortunately, it does not fit in with the new stoneware tiles or furniture or the old ceiling lights have left their mark. Then a renewal or new painting comes into question. The first one costs a lot of money, time and waste. On the other hand, it is relatively easy to delete the unsightly ceiling panels. Depending on the material you should proceed differently – unfortunately, some panels can not be painted. You will find important tips in the article.

Paint ceiling panels – Which material to treat as

Ceiling panels contribute to a cozy atmosphere and can change the overall effect of the room. The ceiling panels are not only sound and heat insulating, they can also make a room appear higher. Under the general term – wood panels, these are made of solid wood and veneered wood fiber boards. Plastic panels emulate the popular wood look perfectly; professionals recommend a coat of paint. Above all, it should firstly be clear what material you are dealing with and to test the coating. A paint coat, for example, should be carefully sanded beforehand.

(adsbygoogle = window.adsbygoogle || []).push();

Paint ceiling panels – plastic and polystyrene panels

There is a risk with the plastic panels that they do not absorb any color at all. In contrast, polystyrene panels can even be painted over with conventional wall paint. Emulsion paint and latex paint are also very suitable for the polystyrene panels. These are characterized by a pore-open surface and after thorough cleaning are already set for new painting. There is even the option to make the ceiling even two-colored – to color joints and panels differently. It is important to mention that the structure of the Styrofoam is a very careful treatment – ornaments and characteristic structure can be damaged when roughened.

Ceiling panels and wall cladding in wood look

As a popular material for ceiling panels MDF is used. It basically consists of pressed wood fibers covered with cover foil or veneer. These are characterized by relatively smooth surface that absorbs heavy paint. Roughen the substrate with fine sandpaper by hand or with the aid of a sander. The already treated ceiling can be painted over with any solvent-free acrylic or latex paint. Do not forget to roast the MDF panels before painting.

Ceiling panels made of real wood in classic white

Real wood panels need a special coat of paint. Because of the paint coating, if one is detected, the surface is completely sanded off. Since this treatment is extremely expensive, you renounce in the future of the paint. For interior rooms suitable glaze, wood wax or wood oil will surprise with excellent results.

Paint ceiling panels – make dark

According to a basic rule of Profimaler, only a previously primed white background allows successful result in exactly selected shade or light color. If you want to prime the ceiling panels with a lighter shade, prime them completely white.

Paint ceiling panels – five important tips

Before you paint the ceiling panels, you must not disregard the pretreatment. Do not paint the ceiling panels without the necessary preparation. Nicotine residues can be deposited on the surface, so you need to thoroughly treat this surface with soapy water – tedious work that will guarantee flawless results.

Paint the ceiling panels and cover the room and furniture with construction foil

For painting panels you need the following materials:

lye

primer

Sandpaper in different grain sizes

Paint in the desired color

duct tape

Paint or polyester putty

Grease and silicone cleaner

Before proceeding with the renovation work, clean up the room in question, cover all windows and doors with building film and get a dust mask and goggles.

The following tools will serve you well when painting:

paint bucket

brush

paint rollers

Edger

Angle or orbital sander

Prepare the ceiling panel before painting

The first step in the preparation of the ceiling panels is grinding. If the panel has already been painted, you must completely remove the old paint. For ceiling panels, the angle or orbital sander are excellent helpers. If veneered panels are used, do not sand too deeply on the edges, as the thickness of the veneer may be between 0.3 and 5 mm.

Fill holes and blemishes on the wooden panels and sand

Existing cracks and holes should be filled after the first coat and then sanded off again. Otherwise, all bumps on the freshly painted surface will be clearly visible. Use putty exactly suited for the material. The plastic polystyrene panels can melt an unsuitable leveling compound. If it is a small damage, you can use paint spatula. With polyester putty you can, for example, smooth veneer surfaces.

Provide a good foundation for successful results

Glue residue is difficult to remove, but an ugly surface will definitely not produce excellent results. Clean the surface with grease and silicone cleaner and allow the cleaning agent to dry. With a dust-binding cloth, you can then wipe the panels. Cover edges and strips with masking tape.

Priming the ceiling panels

Depending on which color system you have selected, you may also want to prime before painting. Some paints include both base coat and top coat. For example, a final topcoat layer has the waterborne acrylic finish. The primer must be evenly applied and allowed to dry.

Paint ceiling panels – insert brush and paint roller

With the wooden panels, you catch the area of tongue and groove. Carefully apply the new coat in small gaps. For the rest of the area use a paint roller. Depending on the color coverage you should apply two to three layers, so that the color can develop its luminosity. If you scratch the panels several times, you must make sure that one layer of paint has already dried before you apply the next one. Apply the clearcoat as soon as the basecoat has dried. If you are not satisfied with the topcoat in some places, you can carefully remove it and paint again. When applying the paint, always brush in the grain of the wood. Paint that you apply across the grain is not evenly distributed. Also, avoid applying too much paint at once.

Paint ceiling panels – ideas for color selection

Ceiling panels give you the opportunity to put the whole room in scene. Old ceiling panels can be redesigned in an intense color. Good condition to the room ultimately not appear cramped, would be a high ceiling. This offers great scope, looks brighter and more spacious. So that the color accents do not appear too striking and irritate the eye, nuances of the same color should find themselves in the room. A colored blanket creates a warm living ambience and the room instantly gets a more modern look. When choosing colors, you can orientate yourself to the ceiling height and your interior. If the furniture is rather dark, a light color will help to visually open the room. The same applies to a low ceiling height. In a light-filled room with high ceilings, even stronger colors fit.

Paint ceiling panels or renew completely – cover laminate

Styrofoam panels have a light wood design and may look better than a white ceiling. The trend is gray wood-like ceiling paneling, which gives the room a slight vintage look. If you want to paint laminate ceiling panels, you need special materials. That is why you should be advised best by the competent specialist staff.

Paint ceiling panels and redesign

However, glazes are only suitable for untreated wood and not for already painted surfaces. The rule here is that the panels can be colored darker, but not brighter. Before overcoating with opaque colors is always a pre-varnish to be applied.

Paper ceiling panels instead of painting

New Post has been published on http://www.uhozz.com/paint-ceiling-panels-tips-ideas-choosing-right-color.html

Paint Ceiling Panels - Tips and Ideas for Choosing the Right Color

The ceiling cladding is very popular, especially if it consists of wooden panels. Unfortunately, it does not fit in with the new stoneware tiles or furniture or the old ceiling lights have left their mark. Then a renewal or new painting comes into question. The first one costs a lot of money, time and waste. On the other hand, it is relatively easy to delete the unsightly ceiling panels. Depending on the material you should proceed differently – unfortunately, some panels can not be painted. You will find important tips in the article.

Paint ceiling panels – Which material to treat as

Ceiling panels contribute to a cozy atmosphere and can change the overall effect of the room. The ceiling panels are not only sound and heat insulating, they can also make a room appear higher. Under the general term – wood panels, these are made of solid wood and veneered wood fiber boards. Plastic panels emulate the popular wood look perfectly; professionals recommend a coat of paint. Above all, it should firstly be clear what material you are dealing with and to test the coating. A paint coat, for example, should be carefully sanded beforehand.

Paint ceiling panels – plastic and polystyrene panels

There is a risk with the plastic panels that they do not absorb any color at all. In contrast, polystyrene panels can even be painted over with conventional wall paint. Emulsion paint and latex paint are also very suitable for the polystyrene panels. These are characterized by a pore-open surface and after thorough cleaning are already set for new painting. There is even the option to make the ceiling even two-colored – to color joints and panels differently. It is important to mention that the structure of the Styrofoam is a very careful treatment – ornaments and characteristic structure can be damaged when roughened.

(adsbygoogle = window.adsbygoogle || []).push();

Ceiling panels and wall cladding in wood look

As a popular material for ceiling panels MDF is used. It basically consists of pressed wood fibers covered with cover foil or veneer. These are characterized by relatively smooth surface that absorbs heavy paint. Roughen the substrate with fine sandpaper by hand or with the aid of a sander. The already treated ceiling can be painted over with any solvent-free acrylic or latex paint. Do not forget to roast the MDF panels before painting.

Ceiling panels made of real wood in classic white

Real wood panels need a special coat of paint. Because of the paint coating, if one is detected, the surface is completely sanded off. Since this treatment is extremely expensive, you renounce in the future of the paint. For interior rooms suitable glaze, wood wax or wood oil will surprise with excellent results.

Paint ceiling panels – make dark

According to a basic rule of Profimaler, only a previously primed white background allows successful result in exactly selected shade or light color. If you want to prime the ceiling panels with a lighter shade, prime them completely white.

Paint ceiling panels – five important tips

Before you paint the ceiling panels, you must not disregard the pretreatment. Do not paint the ceiling panels without the necessary preparation. Nicotine residues can be deposited on the surface, so you need to thoroughly treat this surface with soapy water – tedious work that will guarantee flawless results.

Paint the ceiling panels and cover the room and furniture with construction foil

For painting panels you need the following materials:

lye

primer

Sandpaper in different grain sizes

Paint in the desired color

duct tape

Paint or polyester putty

Grease and silicone cleaner

Before proceeding with the renovation work, clean up the room in question, cover all windows and doors with building film and get a dust mask and goggles.

The following tools will serve you well when painting:

paint bucket

brush

paint rollers

Edger

Angle or orbital sander

Prepare the ceiling panel before painting

The first step in the preparation of the ceiling panels is grinding. If the panel has already been painted, you must completely remove the old paint. For ceiling panels, the angle or orbital sander are excellent helpers. If veneered panels are used, do not sand too deeply on the edges, as the thickness of the veneer may be between 0.3 and 5 mm.

Fill holes and blemishes on the wooden panels and sand

Existing cracks and holes should be filled after the first coat and then sanded off again. Otherwise, all bumps on the freshly painted surface will be clearly visible. Use putty exactly suited for the material. The plastic polystyrene panels can melt an unsuitable leveling compound. If it is a small damage, you can use paint spatula. With polyester putty you can, for example, smooth veneer surfaces.

Provide a good foundation for successful results

Glue residue is difficult to remove, but an ugly surface will definitely not produce excellent results. Clean the surface with grease and silicone cleaner and allow the cleaning agent to dry. With a dust-binding cloth, you can then wipe the panels. Cover edges and strips with masking tape.

Priming the ceiling panels

Depending on which color system you have selected, you may also want to prime before painting. Some paints include both base coat and top coat. For example, a final topcoat layer has the waterborne acrylic finish. The primer must be evenly applied and allowed to dry.

Paint ceiling panels – insert brush and paint roller

With the wooden panels, you catch the area of tongue and groove. Carefully apply the new coat in small gaps. For the rest of the area use a paint roller. Depending on the color coverage you should apply two to three layers, so that the color can develop its luminosity. If you scratch the panels several times, you must make sure that one layer of paint has already dried before you apply the next one. Apply the clearcoat as soon as the basecoat has dried. If you are not satisfied with the topcoat in some places, you can carefully remove it and paint again. When applying the paint, always brush in the grain of the wood. Paint that you apply across the grain is not evenly distributed. Also, avoid applying too much paint at once.

Paint ceiling panels – ideas for color selection

Ceiling panels give you the opportunity to put the whole room in scene. Old ceiling panels can be redesigned in an intense color. Good condition to the room ultimately not appear cramped, would be a high ceiling. This offers great scope, looks brighter and more spacious. So that the color accents do not appear too striking and irritate the eye, nuances of the same color should find themselves in the room. A colored blanket creates a warm living ambience and the room instantly gets a more modern look. When choosing colors, you can orientate yourself to the ceiling height and your interior. If the furniture is rather dark, a light color will help to visually open the room. The same applies to a low ceiling height. In a light-filled room with high ceilings, even stronger colors fit.

Paint ceiling panels or renew completely – cover laminate

Styrofoam panels have a light wood design and may look better than a white ceiling. The trend is gray wood-like ceiling paneling, which gives the room a slight vintage look. If you want to paint laminate ceiling panels, you need special materials. That is why you should be advised best by the competent specialist staff.

Paint ceiling panels and redesign

However, glazes are only suitable for untreated wood and not for already painted surfaces. The rule here is that the panels can be colored darker, but not brighter. Before overcoating with opaque colors is always a pre-varnish to be applied.

Paper ceiling panels instead of painting