#pcocana

Fonts used in first gif:

Pea Wolfe Tracks — link here

King & Queen — link here

Fonts used in second gif:

Kiera — link here

Post — link here

Ellianarelle's Path — link here

Heina's hurry — link here

I used a light leaks/film texture, ripped paper textures, folded paper textures, and transparent pngs (arrows + post-it notes + smiley face).

We'll start with this gif.

Make your gif! The gif here is 540x600px. I color and sharpen it to my liking. Go to image > canvas size > change height from 600 to 770px. I left the anchor in the middle, though it doesn't really matter.

I drag and drop my folded paper texture and change the layer order so it's under my gif. Then I change the blending mode on my gif to Screen so the texture shows through the gif, but I keep the texture at 100% Opacity and Fill.

Now I move my gif around and add my ripped paper textures. I wanted to give it a sort of poster-like feel to it, so I made more room on the bottom for my main text and ended up with something like this. Blending mode is set to Lighten for the ripped paper textures.

I then use layer masks to hide what I don't want shown and add my light leaks/film texture. Blending mode on light leaks/film texture set to Pin Light, Opacity: 50%, Fill: 70%.

I use Levels and Brightness/Contrast adjustment layers to darken the gif up a bit more, then I add a patterned paper texture. Blending mode for patterned paper texture set to Lighten, Opacity: 100%, Fill: 75%. Result:

Now on to the text!

I'm going to be honest here, a lot of this was clicking around until I settled on something I liked. There's three layers to create this text effect. The font used here is King & Queen.

For the first text layer, the font color is set to black (#000000), font size: 87 pt, leading: 80 pt, tracking: 25.

Layer styles used here are stroke and drop shadow.

Text Layer 1

Stroke settings:

Size: 1px

Position: Outside

Blend Mode: Hard Light

Opacity: 40%

Overprint: unchecked

Fill Type: Color

Color: #5911ed

Drop Shadow settings:

Blend Mode: Difference

Color: #2d5ba8

Opacity: 85%

Angle: 70°

Use Global Light: checked

Distance: 7px

Spread: 0%

Size: 6px

Contour: Cone - Inverted

Anti-aliased: unchecked

Noise: 0%

Layer Knocks Out Drop Shadow: checked

Blending mode for text layer set to Overlay, Opacity: 100%, Fill: 85%.

Warp text settings:

Style: Wave

Horizontal: checked

Bend: +60%

Horizontal Distortion: +10%

Vertical Distortion: 0%

With all those settings applied, the first text layer looks like this:

Duplicate the layer, clear all layer styles, and change the color for the second text layer to white (#ffffff). All other text settings (including warp settings) should stay the same. The only layer style then applied to this text layer is stroke.

Text Layer 2

Stroke settings:

Size: 1px

Position: Outside

Blend Mode: Difference

Opacity: 100%

Overprint: unchecked

Fill Type: Color

Color: #d48f16

Blending mode for the second text layer is set to Difference, Opacity: 90%, Fill: 100%. Nudge the second text layer a bit so the first text layer is a little more visible or move to your liking.

With both those layers active, it looks like this:

Duplicate the second text layer, clear layer styles, and change the color of this third text layer to a dark grey (#1a1919). Again, all other text (and warp) settings should stay the same.

Layer styles applied to this layer are stroke and gradient overlay.

Text Layer 3

Stroke settings:

Size: 1px

Position: Outside

Blend Mode: Difference

Opacity: 100%

Overprint: unchecked

Fill Type: Color

Color: #d48f16

Gradient Overlay settings:

Blend Mode: Difference

Dither: unchecked

Opacity: 100%

Gradient: #cd3f00 > #ffdb5d

Reverse: unchecked

Style: Reflected

Align with Layer: checked

Angle: 90°

Scale: 100%

Blending mode for the third text layer set to Exclusion, Opacity: 100%, Fill: 100%. I also moved the third text layer around, down and to the right a few pixels to give it that 3-D Word Art effect.

With all three text layers active:

Next are the arrows.

Take your transparent pngs and place them to your liking. Blending mode for these is set to Difference, Opacity: 100%, Fill: 100%.

Command + click on an arrow thumbnail to select all the pixels in that layer. This is why the image must be transparent!

With that selection made and on a new blank layer, right click the selection and click on stroke. Settings for that are width: 2px, color: white, location: center. Move that a couple of pixels over.

Do this for all arrows for a total of 6 layers for arrows. I group them together to keep my workspace clean, then I duplicate my arrows group with no further changes made to the second group to get what you see in the final gif.

Next is the smaller text. It's three separate text layers for each word, so I can move each of them around to my liking.

Font used is Pea Wolfe Tracks, font color: white (#ffffff), font size: 24 pt, leading: 6 pt, tracking: 25. Bold and italic options checked. I set the blending mode to Difference, Opacity: 100%, Fill: 100%.

And that's it! That concludes the tutorial for this gif!

Now on to this gif.

We'll start with the background gif. There are three separate gifs. You could make them one gif, but I wanted the option to order them differently if I needed to.

All gifs in the background are the size of the canvas: 540x770px. Color and sharpen to your liking, but keep them all black and white. To get the blurry effect go to filter > blur > guassian blur. Set radius to 7.0 pixels. Add this to all three gifs.

Then I add two folded paper textures. Blending mode for one set to Lighten, Opacity: 60%, Fill: 100%. The other set to Screen, Opacity: 70%, Fill: 90%.

I found this tutorial a while back for a halftone effect. They include links to the halftone pattern used here as well as textures and gradient maps not used here.

I'm only using the halftone pattern here.

Pattern fill settings:

Angle: 66°

Scale: 8%

Link with Layer: checked

I also added a gradient overlay layer style to the halftone pattern which gives the gifs the color you see above.

Gradient Overlay settings:

Blend Mode: Overlay

Dither: unchecked

Opacity: 100%

Gradient: #0059ac > #a33600 > #e6b801

Reverse: unchecked

Style: Linear

Align with Layer: checked

Angle: -100°

Scale: 100%

Now on to the square shapes with rounded corners. In the interest of keeping this tutorial short(er), I found this tutorial on youtube that explains how to make squares with rounded corners.

I set my stroke size to 6px, stroke color to white (#ffffff), and fill to no color. I don't use the stroke layer style to make the borders of the shape like in the video! I'm only linking the video to show how to curve corners with square shapes.

Note: Be sure you know how big or small you want these to be and how they're going to fit on your canvas in order to make all the shapes and edit them. It can be tedious to change the settings.

Duplicate and resize to your liking.

In this instance, I wanted to make three squares total, so I had to duplicate twice and resize until I had something I liked.

Settings for the shapes used here are:

Innermost shape: W: 200px, H: 280px, corners: 50px

Middle shape: W: 220px, H: 300px, corners: 60px

Outer shape: W: 240px, H: 320px, corners: 70px

Once I have the size I want for all three shapes, I group them together to make a set and duplicate that group twice, then adjust each set on the canvas for my layout.

What the sets look like all together:

Colors used: orange #e47100, blue #0062d1, yellow #ecac00

To add color to the shapes, either change the color of the shape itself or use layer styles. I used layer styles.

Note: I didn't add the colors until the end after I knew what gifs went where and what color scheme I wanted, but I don't want to add more images than I need to here.

To keep this short, I found this tutorial on youtube that explains how to wrap text around a shape. However, I wanted the text to align on the outside where the white line is and not the green line (left image):

So I created another shape just inside the innermost square and used that as a path for my text (right image). Adjust the text to your liking until you have your text where you want it. Refer to the video tutorial if you need help moving the text along the path!

You don't need the shape path once you have your text where you want it, so use the layer visibility tool to hide it. You can hide your other shapes too so you can work with your text.

Do not delete your shape path!

I duplicate it once I start working with my "jock" text since all the sets are the same size. The "loser" text has to be worked a little differently, but we'll get to that later.

For the princess, jock, and loser text, there are two text layers to create the overall effect. For both layers, font used is Kiera, font color set to white (#ffffff), font size: 60 pt, blending mode set to Normal.

I added a gradient overlay layer style to the first text layer which I'll call the base layer. Opacity for this layer is 100%, Fill: 100%.

Base Layer

Gradient Overlay settings:

Blend Mode: Normal

Dither: unchecked

Opacity: 100%

Gradient: #f0b002 > #e7f0fd

Reverse: checked

Style: Diamond

Align with Layer: checked

Angle: 90°

Scale: 100%

The second text layer is your stroke and drop shadow layer. For this layer, opacity is set to 100%, Fill: 0%.

Stroke and Drop Shadow Layer

Stroke settings:

Size: 2px

Position: Outside

Blend Mode: Linear Light

Opacity: 100%

Overprint: unchecked

Fill Type: Color

Color: #0064cb

Drop Shadow settings:

Blend Mode: Difference

Color: #fb7c00

Opacity: 100%

Angle: 30°

Use Global Light: checked

Distance: 5px

Spread: 0%

Size: 0px

Contour: Linear

Anti-aliased: unchecked

Noise: 0%

Layer Knocks Out Drop Shadow: checked

End result looks like this:

When I make my shapes visible again (minus the one I used as a path), I get this:

The shapes are clearly in the way of the text, whether they're above my shapes layer or under it. I use layer masks to hide what I want, so the text is legible. It looks cleaner this way and I wanted the text to be a part of the shape itself. I do that for each rounded square.

Now on to my smaller gifs. I like to crop, resize, sharpen, and color separately because my laptop and Photoshop would kill me if I tried to do it all on one canvas. I use the size of the middle shape for my gifs (220x300px), so I can have a little wiggle room when adjusting. I then use a layer mask to hide the parts of the gif that are outside of the shape.

A quick way to do this is to command + click on the thumbnail of the innermost square. With that selection made, I got to my gif layer and add a layer mask. Sometimes you need to invert it. Use command + i with the layer mask selected (not the gif) to invert the layer mask.

I repeat this process with my Steve and Robin gifs. I have to go back and forth with all the layer masks to hide parts of the gif/shapes I don't want for each set. It's kind of a long process, but not all that difficult. I label and group my layers together as I work to keep things clean and it helps me keep track of what I edited and what needs to be edited when it comes to things like this.

The picture below shows where I hid the bottom right corner of Nancy as well as the shapes that make up her set using layer masks. I also did this with the Steve and Robin sets, hiding the bottom left corner of Steve.

Similar text settings used for jock. The gradient overlay layer style for this base layer is different than that of princess because of the positioning of the text. Again, same as princess, two text layers are used here. Blending mode, opacity, and fill for both are the same as the princess text layers as mentioned before.

Base Layer

Gradient Overlay settings:

Blend Mode: Normal

Dither: unchecked

Opacity: 100%

Gradient: #007aec > move bottom middle dot to 80% > #e7f0fd

Reverse: checked

Style: Diamond

Align with Layer: checked

Angle: -140°

Scale: 100%

Stroke and Drop Shadow Layer

Stroke settings:

Size: 2px

Position: Outside

Blend Mode: Linear Light

Opacity: 100%

Overprint: unchecked

Fill Type: Color

Color: #a05700

Drop Shadow settings:

Blend Mode: Difference

Color: #ffba00

Opacity: 100%

Angle: 30°

Use Global Light: checked

Distance: 5px

Spread: 0%

Size: 0px

Contour: Linear

Anti-aliased: unchecked

Noise: 0%

Layer Knocks Out Drop Shadow: checked

Image 1: We start with Robin.

Image 2: To make the loser text, I had to create a new path.

Image 3: I make it so the text is on the inside of the path instead of the outside. (Hint: Refer to video tutorial if you don't know how to do that.) I then adjusted the tracking between the letters in the word "loser" so they didn't look so squished together.

Image 4: Then I use layer masks to hide the parts of the shape I don't want shown.

You can then hide the path or delete it. You only need it if you want to adjust the placement of the text. I keep it (hidden) just in case.

Text settings for loser are just like those for princess. Blending mode, opacity, and fill are also the same.

Base Layer

Gradient Overlay settings:

Blend Mode: Normal

Dither: unchecked

Opacity: 100%

Gradient: #eb6400 > #e7f0fd

Reverse: checked

Style: Diamond

Align with Layer: checked

Angle: 90°

Scale: 100%

Stroke and Drop Shadow Layer

Stroke settings:

Size: 2px

Position: Outside

Blend Mode: Linear Light

Opacity: 100%

Overprint: unchecked

Fill Type: Color

Color: #e1a900

Drop Shadow settings:

Blend Mode: Difference

Color: #0068de

Opacity: 100%

Angle: 30°

Use Global Light: checked

Distance: 5px

Spread: 0%

Size: 0px

Contour: Linear

Anti-aliased: unchecked

Noise: 0%

Layer Knocks Out Drop Shadow: checked

Next are the post-it notes! This is probably the easiest part of making this gif. You just have to repeat this process for however many post-it notes you're making.

Image 1: To start, place your transparent post-it note where you want it. You can also rotate it if you'd like.

Image 2: Then create a text layer and write what you want. Font used here is Post. I wanted this text underlined to give emphasis, so I click on the underline option. I also adjusted the leading because I wanted more space between the word and the line. Rotate the text so it looks like it's written on the post-it note. Note: It looks better if you choose a font that looks handwritten.

Image 3: I wanted another line to give emphasis to the "Dingus!!" text and make it seem more handwritten. I use the line tool to create another line.

Image 4: Then I adjust that line to my liking.

Fonts used for notes: Post, Ellianarelle's Path, and Heina's hurry

Repeat this process for all post-it notes!

That finishes the tutorial! (And I hit the 30 image limit lol.) I hope this helps. If you have any further questions, feel free to send an ask or IM and I'll try to answer to the best of my ability.