Adventure Force Enforcer work in progress:
Current stats: ~165 fps, 350 rounds per minute, 2 x 80 dart belts.
I always wanted to mod one of these but I've had several failed attempts. The stock gear box is jus too flimsy and breaks easily when upping the speed and voltage; so I designed a 3d printed mount to hold a much stronger motor and gearbox. The one I chose is probably overkill in terms of torque but it's not like I could just pop in an N90 or one of those smaller hobby gearboxes that Out Of Darts sells, it still needs to be able to pull a belt. Unfortunately the gearbox I got is a little slow on the fire rate, the tag said 400 rpm but it's only getting about 350. I did find a gear box of the same dimensions and style that advertises 470 rpm so I've got that on the way and it should be able to just screw into the same mount. The daybreak wheels in the internal pictures ended up being a bit too tough on the darts than I would prefer as the belt drive doesn't quite align the darts perfectly canter like a magazine would, so many darts would feed closer to the side and get pretty chewed up. So I replaced the wheels with Containment Crew Cyclone wheels, and due to there low concavity it doesn't matter as much if a dart is fed in slightly to the side. I also made a clip that can screw into and clamp down on a cereal box to act as a box magazine for the 80 round belt though the boxes are large enough it could probably hold 100. I took it to the TANG war last Sunday and it managed to do some work during one of the carpe games but during the second round I had loaded it with brand new just opened the box darts and the belt was a bit too tight on the fresh darts and caused several feeding issues.
