#n10-006

Welcome to download the newest Flydumps  N10-006 Exam

100% latest and accurate CompTIA N10-006 exam dumps.Flydumps.com ensures that you are equipped with the latest questions and answers, which give you a better chance of passing the CompTIA N10-006 exam. Also free sharing CompTIA N10-006 VCE test engine and PDF.

QUESTION 1 A technician has verified that a recent loss of network connectivity to multiple workstations is due to a bad CAT5 cable in the server room wall. Which of the following tools can be used to locate its physical location within the wall? A. Cable certifier B. Multimeter C. Cable tester D. Toner probe Correct Answer: D Explanation Explanation/Reference: QUESTION 2 Which of the following is used to authenticate remote workers who connect from offsite? (Select TWO). A. OSPF B. VTP trunking C. Virtual PBX D. RADIUS E. 802.1x Correct Answer: DE Explanation Explanation/Reference: QUESTION 3 Which of the following network infrastructure implementations would be used to support files being transferred between Bluetooth-enabled smartphones?

A. PAN B. LAN C. WLAN D. MAN Correct Answer: A Explanation Explanation/Reference: QUESTION 4 Which of the following would be used in an IP-based video conferencing deployment? (Select TWO). A. RS-232 B. 56k modem C. Bluetooth D. Codec E. SIP Correct Answer: DE Explanation Explanation/Reference: QUESTION 5 Which of the following helps prevent routing loops? A. Routing table B. Default gateway C. Route summarization D. Split horizon Correct Answer: D Explanation Explanation/Reference: QUESTION 6 Which of the following is MOST likely to use an RJ-11 connector to connect a computer to an ISP using a POTS line? A. Multilayer switch B. Access point C. Analog modem D. DOCSIS modem Correct Answer: C Explanation Explanation/Reference: QUESTION 7 An administrator has a virtualization environment that includes a vSAN and iSCSI switching. Which of the following actions could the administrator take to improve the performance of data transfers over iSCSI switches? A. The administrator should configure the switch ports to auto-negotiate the proper Ethernet settings. B. The administrator should configure each vSAN participant to have its own VLAN. C. The administrator should connect the iSCSI switches to each other over inter-switch links (ISL). D. The administrator should set the MTU to 9000 on the each of the participants in the vSAN. Correct Answer: D Explanation Explanation/Reference: QUESTION 8 A network topology that utilizes a central device with point-to-point connections to all other devices is which of the following? A. Star B. Ring C. Mesh D. Bus Correct Answer: A Explanation Explanation/Reference: QUESTION 9 A technician is connecting a NAS device to an Ethernet network. Which of the following technologies will be used to encapsulate the frames? A. HTTPS B. Fibre channel C. iSCSI D. MS-CHAP Correct Answer: C Explanation Explanation/Reference: QUESTION 10 The network install is failing redundancy testing at the MDF. The traffic being transported is a mixture of multicast and unicast signals. Which of the following would BEST handle the rerouting caused by the disruption of service? A. Layer 3 switch B. Proxy server C. Layer 2 switch D. Smart hub Correct Answer: A Explanation Explanation/Reference: QUESTION 11 A company wants to create highly available datacenters. Which of the following will allow the company to continue to maintain an Internet presence at all sites in the event that a WAN circuit at one site goes down? A. Load balancer B. VRRP

C. OSPF D. BGP Correct Answer: D Explanation Explanation/Reference: QUESTION 12 A training class is being held in an auditorium. Hard-wired connections are required for all laptops that will be used. The network technician must add a switch to the room through which the laptops will connect for full network access. Which of the following must the technician configure on a switch port, for both switches, in order to create this setup? A. DHCP B. Split horizon C. CIDR D. TRUNK Correct Answer: D Explanation Explanation/Reference: QUESTION 13 Which of the following communication technologies would MOST likely be used to increase bandwidth over an existing fiber optic network by combining multiple signals at different wavelengths? A. DWDM B. SONET C. ADSL D. LACP Correct Answer: A Explanation Explanation/Reference: QUESTION 14 Which of the following WAN technologies is associated with high latency? A. T1 B. Satellite C. Cable D. OCx Correct Answer: B Explanation Explanation/Reference: QUESTION 15 Which of the following provides accounting, authorization, and authentication via a centralized privileged database, as well as, challenge/response and password encryption? A. Multifactor authentication B. ISAKMP C. TACACS+ D. Network access control Correct Answer: C Explanation Explanation/Reference: QUESTION 16 Which of the following is used to define how much bandwidth can be used by various protocols on the network? A. Traffic shaping B. High availability C. Load balancing D. Fault tolerance Correct Answer: A Explanation Explanation/Reference: QUESTION 17 Which of the following network topologies has a central, single point of failure? A. Ring B. Star C. Hybrid D. Mesh Correct Answer: B Explanation Explanation/Reference: QUESTION 18 A technician is helping a SOHO determine where to install the server. Which of the following should be considered FIRST? A. Compatibility requirements B. Environment limitations C. Cable length D. Equipment limitations Correct Answer: B Explanation Explanation/Reference: QUESTION 19 When convergence on a routed network occurs, which of the following is true? A. All routers are using hop count as the metric B. All routers have the same routing table C. All routers learn the route to all connected networks D. All routers use route summarization Correct Answer: C Explanation Explanation/Reference: QUESTION 20 A technician has been given a list of requirements for a LAN in an older building using CAT6 cabling. Which of the following environmental conditions should be considered when deciding whether or not to use plenum-rated cables? A. Workstation models B. Window placement C. Floor composition D. Ceiling airflow condition Correct Answer: D Explanation Explanation/Reference: QUESTION 21 A company has a new offering to provide access to their product from a central location rather than clients internally hosting the product on the client network. The product contains sensitive corporate information that should not be accessible from one client to another. This is an example of which of the following? A. Public SaaS B. Private SaaS C. Hybrid IaaS D. Community IaaS Correct Answer: B Explanation Explanation/Reference: QUESTION 22 Which of the following refers to a network that spans several buildings that are within walking distance of each other? A. CAN B. WAN

C. PAN D. MAN Correct Answer: A Explanation Explanation/Reference: QUESTION 23 An administrator notices an unused cable behind a cabinet that is terminated with a DB-9 connector. Which of the following protocols was MOST likely used on this cable? A. RS-232 B. 802.3

C. ATM D. Token ring Correct Answer: A Explanation Explanation/Reference: QUESTION 24 Which of the following describes an IPv6 address of ::1? A. Broadcast B. Loopback C. Classless D. Multicast Correct Answer: B Explanation Explanation/Reference: QUESTION 25 A SQL server needs several terabytes of disk space available to do an uncompressed backup of a database. Which of the following devices would be the MOST cost efficient to use for this backup? A. iSCSI SAN B. FCoE SAN

C. NAS D. USB flash drive Correct Answer: C Explanation Explanation/Reference: QUESTION 26 A technician needs to set aside addresses in a DHCP pool so that certain servers always receive the same address. Which of the following should be configured? A. Leases B. Helper addresses C. Scopes D. Reservations Correct Answer: D Explanation Explanation/Reference: QUESTION 27 Which of the following network elements enables unified communication devices to connect to and traverse traffic onto the PSTN? A. Access switch B. UC gateway C. UC server D. Edge router Correct Answer: B Explanation Explanation/Reference: Network Operations QUESTION 1 A network technician receives the following alert from a network device: "High utilizations threshold exceeded on gi1/0/24 : current value 9413587.54" Which of the following is being monitored to trigger the alarm? A. Speed and duplex mismatch B. Wireless channel utilization C. Network device CPU D. Network device memory E. Interface link status Correct Answer: E Explanation Explanation/Reference: QUESTION 2 A technician is configuring a managed switch and needs to enable 802.3af. Which of the following should the technician enable? A. PoE B. Port bonding C. VLAN D. Trunking Correct Answer: A Explanation Explanation/Reference: QUESTION 3 Which of the following protocols must be implemented in order for two switches to share VLAN information? A. VTP B. MPLS

C. STP D. PPTP Correct Answer: A Explanation Explanation/Reference: QUESTION 4 After a recent breach, the security technician decides the company needs to analyze and aggregate its security logs. Which of the following systems should be used? A. Event log B. Syslog

C. SIEM D. SNMP Correct Answer: C Explanation Explanation/Reference: QUESTION 5 A network technician is diligent about maintaining all system servers' at the most current service pack level available. After performing upgrades, users experience issues with server-based applications. Which of the following should be used to prevent issues in the future? A. Configure an automated patching server B. Virtualize the servers and take daily snapshots C. Configure a honeypot for application testing D. Configure a test lab for updates Correct Answer: D Explanation Explanation/Reference: QUESTION 6 A company has implemented the capability to send all log files to a central location by utilizing an encrypted channel. The log files are sent to this location in order to be reviewed. A recent exploit has caused the company's encryption to become unsecure. Which of the following would be required to resolve the exploit? A. Utilize a FTP service B. Install recommended updates C. Send all log files through SMTP D. Configure the firewall to block port 22 Correct Answer: B Explanation Explanation/Reference: QUESTION 7 The RAID controller on a server failed and was replaced with a different brand. Which of the following will be needed after the server has been rebuilt and joined to the domain? A. Vendor documentation B. Recent backups C. Physical IP address D. Physical network diagram Correct Answer: B Explanation Explanation/Reference: QUESTION 8 A network technician has been tasked with designing a WLAN for a small office. One of the requirements of this design is that it is capable of supporting HD video streaming to multiple devices. Which of the following would be the appropriate wireless technology for this design? A. 802.11g B. 802.11ac C. 802.11b D. 802.11a Correct Answer: B Explanation Explanation/Reference: QUESTION 9 A company is experiencing accessibility issues reaching services on a cloud-based system. Which of the following monitoring tools should be used to locate possible outages? A. Network analyzer B. Packet analyzer C. Protocol analyzer D. Network sniffer Correct Answer: A Explanation Explanation/Reference: QUESTION 10 A company is experiencing very slow network speeds of 54Mbps. A technician has been hired to perform an assessment on the existing wireless network. The technician has recommended an 802.11n network infrastructure. Which of the following allows 802.11n to reach higher speeds? A. MU-MIMO B. LWAPP C. PoE D. MIMO Correct Answer: D Explanation Explanation/Reference: QUESTION 11 It has been determined by network operations that there is a severe bottleneck on the company's mesh topology network. The field technician has chosen to use log management and found that one router is making routing decisions slower than others on the network. This is an example of which of the following? A. Network device power issues B. Network device CPU issues C. Storage area network issues D. Delayed responses from RADIUS Correct Answer: B Explanation Explanation/Reference: QUESTION 12 After a company rolls out software updates, Ann, a lab researcher, is no longer able to use lab equipment connected to her PC. The technician contacts the vendor and determines there is an incompatibility with the latest IO drivers. Which of the following should the technician perform so that Ann can get back to work as quickly as possible? A. Reformat and install the compatible drivers. B. Reset Ann's equipment configuration from a backup. C. Downgrade the PC to a working patch level. D. Restore Ann's PC to the last known good configuration. E. Roll back the drivers to the previous version. Correct Answer: E Explanation Explanation/Reference: QUESTION 13 A system administrator has been tasked to ensure that the software team is not affecting the production software when developing enhancements. The software that is being updated is on a very short SDLC and enhancements must be developed rapidly. These enhancements must be approved before being deployed. Which of the following will mitigate production outages before the enhancements are deployed? A. Implement an environment to test the enhancements. B. Implement ACLs that only allow management access to the enhancements. C. Deploy an IPS on the production network. D. Move the software team's workstations to the DMZ. Correct Answer: A Explanation Explanation/Reference: QUESTION 14 An administrator reassigns a laptop to a different user in the company. Upon delivering the laptop to the new user, the administrator documents the new location, the user of the device and when the device was reassigned. Which of the following BEST describes these actions? A. Network map B. Asset management C. Change management D. Baselines Correct Answer: B Explanation Explanation/Reference: QUESTION 15 Company policies require that all network infrastructure devices send system level information to a centralized server. Which of the following should be implemented to ensure the network administrator can review device error information from one central location? A. TACACS+ server B. Single sign-on C. SYSLOG server D. Wi-Fi analyzer Correct Answer: C Explanation Explanation/Reference: QUESTION 16 A network technician has been tasked to configure a new network monitoring tool that will examine interface settings throughout various network devices. Which of the following would need to be configured on each network device to provide that information in a secure manner? A. S/MIME B. SYSLOG

C. PGP D. SNMPv3 E. RSH Correct Answer: D Explanation Explanation/Reference: QUESTION 17 Which of the following would be the result of a user physically unplugging a VoIP phone and connecting it into another interface with switch port security enabled as the default setting? A. The VoIP phone would request a new phone number from the unified communications server. B. The VoIP phone would cause the switch interface, that the user plugged into, to shutdown. C. The VoIP phone would be able to receive incoming calls but will not be able to make outgoing calls. D. The VoIP phone would request a different configuration from the unified communications server. Correct Answer: B Explanation Explanation/Reference: QUESTION 18 A company is deploying a new wireless network and requires 800Mbps network throughput. Which of the following is the MINIMUM configuration that would meet this need? A. 802.11ac with 2 spatial streams and an 80MHz bandwidth B. 802.11ac with 3 spatial streams and a 20MHz bandwidth C. 802.11ac with 3 spatial streams and a 40MHz bandwidth D. 802.11ac with 4 spatial streams and a 160MHz bandwidth Correct Answer: A Explanation Explanation/Reference: QUESTION 19 A technician would like to track the improvement of the network infrastructure after upgrades. Which of the following should the technician implement to have an accurate comparison? A. Regression test B. Speed test C. Baseline D. Statement of work Correct Answer: C Explanation Explanation/Reference: QUESTION 20 When two or more links need to pass traffic as if they were one physical link, which of the following would be used to satisfy the requirement? A. Port mirroring B. 802.1w

C. LACP D. VTP Correct Answer: C Explanation Explanation/Reference: QUESTION 21 A VLAN with a gateway offers no security without the addition of: A. An ACL. B. 802.1w. C. A RADIUS server. D. 802.1d. Correct Answer: A Explanation Explanation/Reference: QUESTION 22 Network segmentation provides which of the following benefits? A. Security through isolation B. Link aggregation C. Packet flooding through all ports D. High availability through redundancy Correct Answer: A Explanation Explanation/Reference: QUESTION 23 A network technician must create a wireless link between two buildings in an office park utilizing the 802.11ac standard. The antenna chosen must have a small physical footprint and minimal weight as it will be mounted on the outside of the building. Which of the following antenna types is BEST suited for this solution? A. Yagi B. Omni-directional C. Parabolic D. Patch Correct Answer: A Explanation Explanation/Reference: QUESTION 24 The administrator's network has OSPF for the internal routing protocol. One port going out to the Internet is congested. The data is going out to the Internet, but queues up before sending. Which of the following would resolve this issue? Output: Fast Ethernet 0 is up, line protocol is up Int ip address is 10.20.130.5/25 MTU 1500 bytes, BW10000 kbit, DLY 100 usec Reliability 255/255, Tx load 1/255, Rx load 1/255 Encapsulation ospf, loopback not set Keep alive 10 Half duplex, 100Mb/s, 100 Base Tx/Fx Received 1052993 broadcasts 0 input errors 983881 packets output, 768588 bytes 0 output errors, 0 collisions, 0 resets A. Set the loopback address B. Change the IP address C. Change the slash notation D. Change duplex to full Correct Answer: D Explanation Explanation/Reference: QUESTION 25 An outside organization has completed a penetration test for a company. One of the items on the report is reflecting the ability to read SSL traffic from the web server. Which of the following is the MOST likely mitigation for this reported item? A. Ensure patches are deployed B. Install an IDS on the network C. Configure the firewall to block traffic on port 443 D. Implement a VPN for employees Correct Answer: A Explanation Explanation/Reference: QUESTION 26 A system administrator wants to update a web-based application to the latest version. Which of the following procedures should the system administrator perform FIRST? A. Remove all user accounts on the server B. Isolate the server logically on the network C. Block all HTTP traffic to the server D. Install the software in a test environment Correct Answer: D Explanation Explanation/Reference: QUESTION 27 Multiple students within a networking lab are required to simultaneously access a single switch remotely. The administrator checks and confirms that the switch can be accessed using the console, but currently only one student can log in at a time. Which of the following should be done to correct this issue? A. Increase installed memory and install a larger flash module. B. Increase the number of VLANs configured on the switch. C. Decrease the number of VLANs configured on the switch. D. Increase the number of virtual terminals available. Correct Answer: D Explanation Explanation/Reference:

Network Security QUESTION 1 A technician needs to install software onto company laptops to protect local running services, from external threats. Which of the following should the technician install and configure on the laptops if the threat is network based? A. A cloud-based antivirus system with a heuristic and signature based engine B. A network based firewall which blocks all inbound communication C. A host-based firewall which allows all outbound communication D. A HIDS to inspect both inbound and outbound network communication Correct Answer: C Explanation Explanation/Reference: QUESTION 2 Which of the following physical security controls prevents an attacker from gaining access to a network closet? A. CCTVs B. Proximity readers C. Motion sensors D. IP cameras Correct Answer: B Explanation Explanation/Reference: QUESTION 3 A network technician is performing a wireless survey in the office and discovers a device that was not installed by the networking team. This is an example of which of following threats? A. Bluesnarfing B. DDoS C. Brute force D. Rogue AP Correct Answer: D Explanation Explanation/Reference: QUESTION 4 A technician is setting up a computer lab. Computers on the same subnet need to communicate with each other using peer to peer communication. Which of the following would the technician MOST likely configure? A. Hardware firewall B. Proxy server C. Software firewall D. GRE tunneling Correct Answer: C

Need The Newest CompTIA N10-006 Exam Dumps? Why not try CompTIA N10-006 vce or pdf exam dumps? You can get all the new CompTIA N10-006 exam questions and answers you need, we ensure high pass rate and money back guarantee.

Welcome to download the newest Flydumps  N10-006 Exam

Welcome to download the newest Dumpsoon N10-006 dumps

Flydumps CompTIA N10-006 practice tests are composed of latest exam questions formulate an actual exam scenario with an intent to expose your potentials and latent skills. Our Microsoft practice tests encompass all the fundamental of CompTIA N10-006 exam formats, orients your efforts towards guaranteed success for CompTIA N10-006 exams. You can hit your target with assurance if you have opted for our CompTIA N10-006 practice test training.

QUESTION 1 A technician has verified that a recent loss of network connectivity to multiple workstations is due to a bad CAT5 cable in the server room wall. Which of the following tools can be used to locate its physical location within the wall? A. Cable certifier B. Multimeter C. Cable tester D. Toner probe Correct Answer: D Explanation Explanation/Reference: QUESTION 2 Which of the following is used to authenticate remote workers who connect from offsite? (Select TWO). A. OSPF B. VTP trunking C. Virtual PBX D. RADIUS E. 802.1x Correct Answer: DE Explanation Explanation/Reference: QUESTION 3 Which of the following network infrastructure implementations would be used to support files being transferred between Bluetooth-enabled smartphones?

A. PAN B. LAN C. WLAN D. MAN Correct Answer: A Explanation Explanation/Reference: QUESTION 4 Which of the following would be used in an IP-based video conferencing deployment? (Select TWO). A. RS-232 B. 56k modem C. Bluetooth D. Codec E. SIP Correct Answer: DE Explanation Explanation/Reference: QUESTION 5 Which of the following helps prevent routing loops? A. Routing table B. Default gateway C. Route summarization D. Split horizon Correct Answer: D Explanation Explanation/Reference: QUESTION 6 Which of the following is MOST likely to use an RJ-11 connector to connect a computer to an ISP using a POTS line? A. Multilayer switch B. Access point C. Analog modem D. DOCSIS modem Correct Answer: C Explanation Explanation/Reference: QUESTION 7 An administrator has a virtualization environment that includes a vSAN and iSCSI switching. Which of the following actions could the administrator take to improve the performance of data transfers over iSCSI switches? A. The administrator should configure the switch ports to auto-negotiate the proper Ethernet settings. B. The administrator should configure each vSAN participant to have its own VLAN. C. The administrator should connect the iSCSI switches to each other over inter-switch links (ISL). D. The administrator should set the MTU to 9000 on the each of the participants in the vSAN. Correct Answer: D Explanation Explanation/Reference: QUESTION 8 A network topology that utilizes a central device with point-to-point connections to all other devices is which of the following? A. Star B. Ring C. Mesh D. Bus Correct Answer: A Explanation Explanation/Reference: QUESTION 9 A technician is connecting a NAS device to an Ethernet network. Which of the following technologies will be used to encapsulate the frames? A. HTTPS B. Fibre channel C. iSCSI D. MS-CHAP Correct Answer: C Explanation Explanation/Reference: QUESTION 10 The network install is failing redundancy testing at the MDF. The traffic being transported is a mixture of multicast and unicast signals. Which of the following would BEST handle the rerouting caused by the disruption of service? A. Layer 3 switch B. Proxy server C. Layer 2 switch D. Smart hub Correct Answer: A Explanation Explanation/Reference: QUESTION 11 A company wants to create highly available datacenters. Which of the following will allow the company to continue to maintain an Internet presence at all sites in the event that a WAN circuit at one site goes down? A. Load balancer B. VRRP

C. OSPF D. BGP Correct Answer: D Explanation Explanation/Reference: QUESTION 12 A training class is being held in an auditorium. Hard-wired connections are required for all laptops that will be used. The network technician must add a switch to the room through which the laptops will connect for full network access. Which of the following must the technician configure on a switch port, for both switches, in order to create this setup? A. DHCP B. Split horizon C. CIDR D. TRUNK Correct Answer: D Explanation Explanation/Reference: QUESTION 13 Which of the following communication technologies would MOST likely be used to increase bandwidth over an existing fiber optic network by combining multiple signals at different wavelengths? A. DWDM B. SONET C. ADSL D. LACP Correct Answer: A Explanation Explanation/Reference: QUESTION 14 Which of the following WAN technologies is associated with high latency? A. T1 B. Satellite C. Cable D. OCx Correct Answer: B Explanation Explanation/Reference: QUESTION 15 Which of the following provides accounting, authorization, and authentication via a centralized privileged database, as well as, challenge/response and password encryption? A. Multifactor authentication B. ISAKMP C. TACACS+ D. Network access control Correct Answer: C Explanation Explanation/Reference: QUESTION 16 Which of the following is used to define how much bandwidth can be used by various protocols on the network? A. Traffic shaping B. High availability C. Load balancing D. Fault tolerance Correct Answer: A Explanation Explanation/Reference: QUESTION 17 Which of the following network topologies has a central, single point of failure? A. Ring B. Star C. Hybrid D. Mesh Correct Answer: B Explanation Explanation/Reference: QUESTION 18 A technician is helping a SOHO determine where to install the server. Which of the following should be considered FIRST? A. Compatibility requirements B. Environment limitations C. Cable length D. Equipment limitations Correct Answer: B Explanation Explanation/Reference: QUESTION 19 When convergence on a routed network occurs, which of the following is true? A. All routers are using hop count as the metric B. All routers have the same routing table C. All routers learn the route to all connected networks D. All routers use route summarization Correct Answer: C Explanation Explanation/Reference: QUESTION 20 A technician has been given a list of requirements for a LAN in an older building using CAT6 cabling. Which of the following environmental conditions should be considered when deciding whether or not to use plenum-rated cables? A. Workstation models B. Window placement C. Floor composition D. Ceiling airflow condition Correct Answer: D Explanation Explanation/Reference:

The Flydumps New CompTIA N10-006 practice tests helps the user to keep a check on their learning and understanding and improve for the CompTIA N10-006 exam. Flydumps makes you pass your exam much easier.

Welcome to download the newest Dumpsoon N10-006 dumps

My name is Ben Calantas a student at Devry University. I’m going to school for a Multimedia Design and Development with an emphasis in Graphic and Multimedia Design. I born and raised in Bakersfield, California and now live in Dallas, Tx I am a veteran of the armed services with 4 years in the United States Marines and currently serving with the Air Force as a videographer. I married my beautiful wife in April and she is also going to school.

I started course MDD410 emerging multimedia technologies in September. My initial expectations of this class was I was going to be introduced to currently technologies and talk with like minded individuals about computers, multimedia and how we use them to our culture together. I was motivated that I would be able to move closer to my goal of having my bachelors. Each week I was hoping to have a chance to create products that I can to help strengthen my portfolio in the marketplace, especially with relevant and emerging technology in multimedia world today.

I learned many new ways and was reintroduced to other types of technology. Prior to my break from college I had a chance to work with 3ds Max and found that combined with 3D printing is a great tool to have. We had a project where we would get to manipulated a 3d object in 3DS max, this reminded me the excitement of knowing where design can take you. We also discussed things such as privacy in social networking and the interaction of big data. These issues were very relevant too me because as I am taking this class I am training in network security.

We discussed where wearable technology such as Google glass and Smart watches. How using this technology can be able to create a new form of experience in the real world. Even with creating our own interpretation of an interface that is view through a wearable like Google glass. Staying in line with design in current technology we also designed an application interface for a mobile platform like iPhones or Android phones. I was able to use this and add to my graphic design portfolio.

Over the past eight weeks I was able to learn and bring with me moving forward into the tech world. It is to always continue to learn. From when I first tore apart my first computer to when I opened photoshop elements for the first time. The world of design, technology and how we use it to communicate will always change. It’s a dynamic world where to remain employable and relevant you need to know what is the next step around the corner and be ready to take on that challenge. Each week we talked about different element of technology and how it relates to how we as design professionals should know and understand it.