This video shows you how to use Xhorse Multi Prog Programmer, Godiag G-V ECU Cable, and Godiag GT107 to read DQ250 data. 

This is a tutorial on how to use Xhorse Multi-Prog&GODIAG GT107 to read VAG MQB DQ250 data by BENCH. Meanwhile, you'll need the new GODIAG G-V ECU Cable to connect them for reading, writing, or cloning ECU.

Follow the wiring diagram to connect Multi-Prog, DQ250(02E.0D9) and GODIAG.

Power on Multi-Prog and open software. Device >> VAG_TEMIC_DQ250-MQB(Audi->A3) >> OK INT EEPROM >> Read Turn on GT107 power. I am reading success. Save the EEPROM file.

INT FLASH >> Read Reading success.

Problem: Why the XHORSE Multi-Prog Software prompt: "Not connect to the device, please check and try again!" What's the reason?

Am I misconnecting? Please help.

Solution 1. Check if the device connection is correct. 2. Check if the driver was installed successfully. In general, the Multi-Prog driver will automatically install with software. If not, please install it manually.

Help >> Install the driver >> USB Serial(CDC)

After installation, check if the Task Manager can recognize the driver.

3. If none of the above work, please contact Xhorse for help.

XHORSE Multi-ProgProgrammer can force unlock BMW CAS4 5M48H successfully if the simple chip unlock fails. Next, I'll demonstrate both unlock operations.

1. Simple Unlock BMW >> BMW(IMMOBILIZER) >> CAS4-5M48H-R/W-UNLOCK >> OK >> Unlock Already backup the Dflash & Pflash? OK Chip unlocking failed! Error code: 00000084 command number error.

In this case, we can try the Force Unlock method below.

2. Force Unlock Reselect the option: BMW >> BMW(IMMOBILIZER) >> CAS4-5M48H-FORCE-UNLOCK >> OK >> Unlock Maybe lost data, continue? OK Unlock success!

This article will share the problem and solution of the Xhorse chip crack failure reported by our customer Michal Stecki.

Michal Stecki feedback: I used vh23 Smelecom to write Xhorse chip and multi prog I have this from the screenshot

Solution: The power setting was 5 v default for 160d change for 3.3 and it reads

Problem solved.

For more tech support, please contact: Whatsapp: +86 13983755934 Telephone: +86 13983755934 Wechat: +86 13983755934 Official Email: [email protected] Skype: OBD2Tool.co.uk

This post will guide you on how to use Xhorse Multi-prog Programmer to read and write EEPROM.

First, we check the model of the EEPROM.

Then we open the Multi-prog software. Click "Device">>"Serial EEPROM&FLASH", and enter the model number. Open the "Details" and you can see the device information, important prompt, and adapter information.

Now we learn that the chip requires a VH13 adapter.

Remove the magnetic shield and check the adapter model. Confirm that it is a VH13 adapter and put the shield back. Place the chip aligned at the bottom, ensure that the pin one is upward, and then lock it.

Click to read the data and here will show the reading progress. It's successful. We can modify the data just like this and click here to write it in.

When we read the data again, we can see that the data has been modified successfully.

For more details, please refer to the video below:

Multi Prog Programmer is a new product recently launched by Xhorse. It is an updated version of VVDI Prog and supports ECU/TCU reading, writing cloning, and other functions. This article will introduce you in detail to some of the functions supported by Multi Prog Programmer and the list of supported ECU/TCU models.

Xhorse Multi Prog Functions:

Read, Write, and Clone ECU BMW B48/B58 reading ISN BMW MSD80/81 /85/87/MSV90 Mercedes-Benz SIM271 BMW MSV80 VW BOSCH MED17 Series ECU BMW N13/N20/N55/B38/TC17X Support Marelli, Siemens, Delphi, and other ECU manufacturers

Read, Write, and Clone TCU Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc. Porsche DL501 TCU Ford Dodge and other MPS6 series TCU BMW DKG, Mercedes-Benz VCS, and other models TCU

Vehicle Engine Data Calculation and Processing MEDl 7/EDC17 data processing

Support Flexible Extension of Third-party Plug-ins Support the development of third-party plug-ins and provide data processing and modification services

Read & Write MCU Support reading and writing MCU of various brands including Renesas, Motolora, NXP, Infineon, etc. Support certain encrypted chip reading and writing

Read & Write Vehicle Immo Module Support Porsche, Land Rover, Mercedes-Benz EZS, VOLVO, VW MQB dashboard, AUDI BCM2, etc. Support modules including BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc. Support other common IMMO modules Note: Compatible with Xhorse solder-free adapters and cables.

Read & Write EEPROM Support EEPROM and FLASH

Read & Write Vehicle Dashboard Support dashboard of VW, Honda, Hyundai, Kia, etc.

Multi-Prog supported ECU TCU Models: