#godiag

The GODIAG IM001 is a professional-grade device designed to reuse locked Toyota and Lexus smart keys. By using innovative non-destructive technology, it bypasses the need to unlock or reset keys to a blank state, saving time and reducing costs.

Product Overview The IM001 features a compact design with integrated sensing areas and status indicators: 1. Chip Simulate Area: For vehicle communication. 2. Key Sensing Area: Where the locked key is placed. 3. Button: Used for power and operation. 4. Status Light: Indicates device activity. 5. Type-C Port: For charging and power.

Core Specifications Supported Models: Toyota/Lexus 4A, AA, BA. Connectivity: Bluetooth BLE 5.0 and a dual-core ARM processor. Power: Built-in 3.7V 450mAh battery or 5V DC external power. Dimensions: $61.5 \times 96.5 \times 12.5$ mm.

Operation Guide Follow these three simple steps to reactivate a locked key:

Step 1: Simulate Key Generation Place the locked or accidentally deleted key in the Key Sensing Area (2). Press the Button (3). The IM001 will read the secure identifier and internally simulate a matching key.

Step 2: Match to Vehicle Use the IM001 device itself as the replacement key during the standard vehicle matching process. The device writes the ID and necessary data into the vehicle's system while capturing the required passwords.

Step 3: Write-Back Operation Once the data is retrieved, the IM001 writes the complete information back to the original locked key.

Final Confirmation: Test the original key on the vehicle to ensure all functions are restored.

Indicators & Controls Status Light Meanings

Button Functions Power On/Off: Long-press for ~3 seconds. Status Inquiry: Short-press while on to hear a voice prompt of the current status. Reset: Long-press for ~5 seconds.

Maintenance & Warranty Warranty: 1-year limited warranty from the date of purchase. Care: Avoid improper voltage, unauthorized modifications, or harsh environments (water/extreme heat). Operating Temp: -10℃ to 50℃.

GODIAG GT115 VAG Test Platform is designed for Volkswagen’s MQB system to simplify off-vehicle IMMO programming, key matchingand diagnostics. Featuring a POGO PIN for stable dashboard data reading/writing, it ensures a secure connection without damaging the cable - ideal for efficient and reliable servicing.

This is a GODIAG GT115 User Manuel & complete guide for VAG MQB IMMO programming & diagnositics.

How to Detect Keys with the IMMO4 CAN-BUS UDS Platform?

Step 1: Connect the GT115 to the dashboard and connect it to the power supply. Step 2: Press the start button, press the ignition button, and then press the Dash button. Step 3: The instrument panel displays safe, and the key sensor coil flashes for 3 seconds and then goes out. It indicates that the key is not recognized.

Step 4: Connect the GT115 to the dashboard and connect it to the power supply. Step 5: Press the start button, press the ignition button, and then press the Dash button. Step 6: The instrument panel displays the mileage, and the key sensor coil flashes and then goes out. It indicates that the key has been identified.

How to Use POGO PIN on IMMO4 CAN-BUS UDS Platform?

Step 1: Connect GT115 to the instrument panel and power it on. Step 2: First, press the red ignition button, then press the “Dash” button.

Step 3: Then use the pogo pin probe to poke the pogo pin point in the instrument chip.

Step 4: After poking, do not let go and press the start button again. Step 5: Wait for 5 seconds and then release the pogo pin probe.

Step 6: At this time, only one light is on, indicating that the instrument has successfully entered the pogo pin mode.

How to Use on the MQB Platform?

Step 1: Connect the gateway.

Step 2: Connect the BCM module.

Step 3: Connect the instrument.

Step 4: Connect the engine.

Step 5: Finally, turn on the power.

Step 6: Press the start button and the red ignition switch button again. Step 7: Then you can connect other devices for testing, diagnoses, programming, and coding.

How to Use Engine Independent Communication?

Step 1: Connect the engine with colored jumper wires.

Step 2: Connect to power.

Step 3: Press in sequence: power switch start, ignition switch IGN, engine button switch ENG. Step 4: Then connect other devices to the OBD port for testing and diagnosis.

GODIAG G-A ECU/TCU cable is used to connect AUTEL IM608 IM508 with GT107, GT107+ or GODIAG ECU GPT Boot adapter to read and write data on VAG gearbox ECU and engine ECU, clone ECU.

How to use Godiag GT112 K-Line with Xhorse VVDI2? - obd2shop.co.uk

This video shows you how to use Godiag GT112 K-Line with Xhorse VVDI2. Godiag GT112 K-Line: https://www.obd2shop.co.uk/wholesale/godiag-gt112-k-line-for-vag.html

This is a tutorial on how to use Xhorse VVDI2 + GODIAG VAG Test Platforms GT110 to make a dealer key for VW IMMO4 NEC 24C32 by bench.

Connect VVDI2, GODIAG GT110& immo dashboard to the PC. Power on GT110, and press the red button. We can see the dashboard light. 1) This indication means that the key is not recognized. 2) The light of the key identifier flashes for a long time indicating that the chip key and the vehicle's IMMO system do not match, and the chip key needs to be re-matched.

Open VVDI2 software, VW >> Diagnostic >> Diagnostic Unit >> Instruments >> Connect >> Identification Here we can perform read DTCs, clear DTCs, coding, security access, etc.

Key learn >> 4th immobilizer system - VW/Skoda/Seat >> Auto detect type >> Diag >> Read immo data >> Login Method 1 >> NEXT Reading immo data success.

Click "Read KM". Read odometer success, it's 112580km.

Read EEPROM/FLASH >> Read EEPROM >> NEXT >> Login Method 1 >> NEXT Reading data success.

Make dealer key >> Login Method 1 >> NEXT >> Skoda Select "Prepare OEM key: need a special key or OEM key. You must provide an original key ID to prepare the OEM key, the OEM key can do the online operation. OEM key can start the engine directly for the 4th immo system. For 5th immo system need to learn again." Key 1 >> NEXT >> Yes

Put the VVDI Super Chip into the VVDI2 coil. Attention: If the chip is used, it needs to be wiped clean first. Key make okay and locked!

Put the super chip into the GODIAG coil for a test. 1) This indication means that the key is recognized. 2) The light of the key identifier flashes and then goes out indicating that the IMMO chip and the chip key are working properly.

Test the key on the car. 1. The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly. 2. The light of the key identifier flashes for a long time indicating that the chip key and the vehicle's IMMO system do not match, and the chip key needs to be re-matched. 3. The light of the key identifier does not flash which means that the vehicle's IMMO system is faulty. Please check the vehicle's IMMO system.

This is a tutorial on how to use Xhorse Multi-Prog&GODIAG GT107 to read VAG MQB DQ250 data by BENCH. Meanwhile, you'll need the new GODIAG G-V ECU Cable to connect them for reading, writing, or cloning ECU.

Follow the wiring diagram to connect Multi-Prog, DQ250(02E.0D9) and GODIAG.

Power on Multi-Prog and open software. Device >> VAG_TEMIC_DQ250-MQB(Audi->A3) >> OK INT EEPROM >> Read Turn on GT107 power. I am reading success. Save the EEPROM file.

INT FLASH >> Read Reading success.