#miniwaterpump

The 0.5 HP Kirloskar Chhotu is a compact, energy-efficient water pump perfect for small homes and light-duty applications. Known for its low maintenance and excellent suction, it's ideal for daily water needs. Buy genuine Kirloskar pumps only at Kedia Polymer – trusted for quality and performance.

Specification :

Power Source: DC

Material: Polyvinyl Chloride

Color: Multi

Working voltage:  6V to 12V

Power current:  1.9A

What is a brushless DC mini water pump

브러시리스 DC 미니 워터펌프 사용시 주의사항 7가지

브러시리스 DC 펌프는 DC 전원 공급 장치를 사용하여 브러시리스 모터를 구동합니다. 브러시리스 모터가 작동하면 임펠러가 작동하여 펌프의 액체가 압력을 생성하고 압력이 점차 증가하여 액체를 전달하는 기능을 달성합니다.

저렴한 가격, 작은 크기, 고효율, 긴 수명, 안전성 및 정숙성으로 인해 브러시리스 dc 미니 워터 펌프는 워터 디스펜서, 커피 머신, 전기 자동차, , EV 충전기, 태양열 물 순환 시스템, 컴퓨터 물 순환 방열, 냉장, 의료 장비, 냉각 시스템, 욕실 제품 및 기타 분야.

DC 미니워터펌프를 사용하실 때에는 다음 7가지 사항에 특히 주의하셔야 합니다.

올바르게 전원 공급 12V 또는 24V DC 변압기를 사용하여 전원을 공급하고 펌프 전원 라인의 양극과 음극을 올바르게 연결하십시오. 워터 펌프의 빨간색 전원선은 양극에 연결되고 검은색 전선은 음극에 연결됩니다. 양극과 음극은 뒤집을 수 없습니다. 그렇지 않으면 펌프가 단락되어 화상을 입을 수 있습니다.

허용 전압 범위 내에서 펌프를 작동하십시오. 워터 펌프는 과도한 전압으로 사용할 수 없으며 브러시리스 DC 펌프는 지정된 작동 전압 범위 내에서 사용해야 합니다. 워터 펌프에 과전압 보호 기능이 있는 경우 전압이 범위를 초과하면 워터 펌프가 자동으로 멈추고 정상 전압 범위로 돌아온 후 작업을 재개합니다.

자기 입자 또는 불순물이 있는 비전도성 액체를 엄격히 금지합니다. 강자성 불순물과 입자는 자기 드라이브와 베어링에 들어가 자석 회전자에 흡착되어 막히게 됩니다. 불순물과 입자가 펌프 본체에 들어가 펌프를 손상시킵니다. 가능한 한 여과 조치를 취해야 합니다. 고체 입자가 포함된 매체를 운반할 때 브러시리스 DC 펌프의 물 입구에서 여과하여 불순물이 펌프에 들어가 막히는 것을 방지해야 합니다. 불순물 또는 자기 전도성 입자가 포함된 액체는 엄격히 금지됩니다. 결정화 또는 침전되기 쉬운 매체를 이송한 후 적시에 플러시(펌프 정지 후 깨끗한 물로 펌프 챔버를 채우고 1분간 작동 후 배수)하여 슬라이딩 베어링의 수명을 보호합니다.

지정된 온도에서 작동 워터 펌프는 지정된 온도에서 작동해야 하며 매체의 온도는 표준을 초과하는 것을 엄격히 금지합니다. 이는 쉽게 자석의 자기 소거 및 제어 회로의 성능 저하로 이어질 수 있습니다. 백금 저항 온도 센서는 마그네틱 펌프의 격리 슬리브 외부 표면에 설치하여 링 갭 영역의 온도 상승을 감지하여 온도가 한계를 초과할 때 경보를 울리거나 중지할 수 있습니다.

워터 펌프의 공회전을 엄격히 금지합니다. 브러시리스 DC 미니 원심 펌프는 작동 중에 중간 윤활이 없기 때문에 건조 작동이 엄격히 금지되며 로터가 고속으로 회전하여 온도가 200-300도까지 상승하여 착용하기 쉽습니다. 펌프가 고착되도록 합니다. 따라서 장기간 공회전 위험이 있는 경우 펌프 모터를 보호하기 위해 공회전 보호를 사용자 정의할 수 있습니다.

최소 파이프 직경은 입구 및 출구보다 작지 않습니다. 파이프라인의 최소 파이프 직경이 물 입구 및 출구의 내경보다 작지 않은지 확인하십시오. 그 미만이면 워터펌프의 압력이 정상적으로 해제되지 않아 워터펌프의 로터가 고속으로 회전하게 되어 소음이 크다. 한편으로는 워터 펌프의 수명도 단축됩니다.

Topsflo Battery Cooling Water Pump Effectively Solves the Safety Problem of Energy Storage System

New energy storage, as an important measure to improve the regulation ability, comprehensive efficiency and security capability of the energy power system and support the construction of the new power system, which is one of the key supports for carbon neutrality in the energy field. However, the frequent safety accidents of energy storage power stations in recent years are anxious, and the thermal management of energy storage is very important. The energy storage industry will enter the fast lane of development In recent years, PV and wind power and other new energy power generation has developed significantly, but the development of the energy storage industry has not kept up. The ratio of storage to new energy has gradually declined in recent years. In 2020, China's new energy storage ratio will be about 6.7%, which is significantly lower than that of other countries and regions outside China. 15.8% reserve ratio. Since 2020, various provinces in China have introduced relevant policies to encourage or mandate new energy supporting energy storage, stipulating that the proportion of new energy power side allocation and storage is 5%-20%. On August 2022, the National Development and Reform Commission and the Energy Bureau clarified that 15% of the power of peak-shaving resources (20% is preferred), and more than 4 are required to be equipped with peak-shaving capabilities. On July, the National Development and Reform Commission and the National Energy Administration issued the "Guiding Opinions on Accelerating the Development of New Energy Storage", with the goal of achieving carbon peak and carbon neutrality. By 2025, new energy storage will be realized from the initial stage of commercialization to large-scale The development will turn, and the installed capacity will reach more than 30GW; by 2030, the comprehensive market-oriented development of new energy storage will be realized, the technological innovation industry will rank among the top in the world, and the installed capacity will basically meet the corresponding needs of the new power system. Recently, China Southern Power Grid issued the "14th Five-Year Plan for Power Grid Development" and proposed that during the "14th Five-Year Plan" period, the construction plan of China Southern Power Grid will invest about 670 billion RMB in order to speed up the construction of digital power grids and the process of modernizing power grids, and promote new types of power with new energy as the main body. In terms of system construction, in the field of energy storage systems, 20GW of new energy is proposed, and the ratio of new energy storage in China Southern Power Grid is nearly 20%. Safety issues are the core issues of energy storage power stations In recent years, safety accidents of energy storage power stations have occurred from time to time, which has aroused strong social concern. On April 2021, an explosion occurred at the Beijing Guoxuan Fuweisi Solar Energy Storage Power Station, resulting in the death of two firefighters. On July, an energy storage system in Victoria, Australia, detonated. Four days after the fire, the local government was still trying to contain the fire. From 2011 to April 2021, there have been 32 fire and explosion accidents in energy storage power stations around the world. Especially in South Korea, under the incentives of policies, the construction of energy storage projects has exploded. There have been major safety hazards on the one hand, and 24 safety accidents have occurred since 2017. Thermal management is an important guarantee for energy storage safety Among the above 32 fire and explosion accidents of energy storage power stations, 66% (21 cases) of fire and explosion of energy storage power stations mostly occurred during charging or resting after charging. The battery is in an overcharged state, and the voltage rises to form an internal short circuit, resulting in local thermal runaway, which leads to spontaneous combustion and fire. This shows the importance of thermal management for the safety of energy storage power plants. The energy storage system must be equipped with a temperature control system with sufficient strength and flexibility to ensure the safe and stable operation of the power plant. TOPSFLO battery cooling water pump protects the safety of energy storage A good temperature control system needs a high-quality cooling water pump to support it. TOPSFLO is the supplier of the battery energy storage system (energy wall) of “T” Company in the United States, and has related battery cooling system water pump solutions. Every family has water pumps, but there is still a lack of water pumps with a 0 PPM defective rate without problems in China. The main advantages of the TOPSFLO battery cooling water pump are: high efficiency, good cooling effect, and a life span of 30,000 hours. Functions such as intelligent speed regulation and signal feedback can be customized, so that the system has no worries. At present, domestic household energy storage lithium battery cooling system manufacturers will choose TOPSFLO TL-B10 cooling pump  for system support, and industrial and commercial energy storage with 225 kWh or more battery cooling can use TOPSFLO TL-C01 pump or TL-C02 pump for system support. If you have further needs, please contact TOPSFLO's pre-sales engineers further.

Large flow, high pressure

TOPSFLO TL-C02 Mini brushless DC water pump 

Large flow, high pressure

Stable water flow, high efficiency

Quiet design, low noise

No leakage, more reliable

TOPSFLO TL-B10 Mirco #DCBrushlessWaterPump

Quieter, higher temperature resistance, longer life

Applications: hot drink machines, water machines, automotive air conditioners, laser cooling, air coolers, air energy water heaters, battery cooling

http://www.topsflo.com/brushless-dc-pump/brushless-dc-pump.html

Contact Us:

Skype:topsflo

Email:[email protected]