#jack vs plug

Choose the Right Connector Gender: Jack vs. Plug, RP-SMA vs. SMA

In the realm of radio frequency (RF) communication, picking the perfect connection is just as important as selecting the right antenna or cable. Mismatched connectors can cause annoyance, signal loss, and even damage to your equipment. One of the most prevalent sources of misunderstanding is connection gender (jack vs. plug) and the specialist designation RP-SMA vs. SMA.

Let's clear up some confusion about these words so your next RF setup goes smoothly and efficiently.

Jack vs. Plug: A Universal Rule

The fundamental rule for connector gender in RF, like with other electrical connections, is rather intuitive:

Plug (Male): A plug is often a connection with a central pin. It "plugs into" the other connection.

A jack (female) is a connection having a central receptacle/hole. It "receives" a plug.

Consider an electrical wall outlet (jack) and the plug on your appliance wire. The same logic applies here.

Visual Aid:

Threads are often found on the inside of a plug's shell.

Threads are often seen on the exterior of a jack's shell.

This standard covers practically all RF connector types, including BNC Connector, N-Type Connector, TNC Connector, and, of course, SMA Connector.

RP-SMA vs SMA: The Reversal Twist

This is when things become a bit more precise, which might lead to confusion. SMA (SubMiniature A) connections are widely used in Wi-Fi, cellular, and other tiny RF devices. The "RP" in RP-SMA represents Reverse Polarity.

This "reverse polarity" does not indicate that the electrical polarity is reversed; rather, it refers to the reversal of the gender of the central pin in relation to the conventional convention.

Let us break it down:

1. Standard SMA (SMA-male and SMA-female).

SMA Male (Plug):

The outer shell contains internal threads.

The center contact has a pin.

Common Applications: Frequently encountered on wires that connect to gadgets.

SMA Female (Jack):

Outer Shell: Has external threads.

Center Contact: Has a receptacle/hole.

Common Use: Frequently used as a port on gadgets or antennas.

Reverse Polarity SMA (RP-SMA-Male and RP-SMA-Female)

RP-SMA-Male (Plug)

Outer Shell: Has internal threads (similar to a regular male).

Center Contact: Most importantly, it has a receptacle/hole (like a conventional female).

Common applications include Wi-Fi router or access point antennas.

RP-SMA Female (Jack):

Outer Shell: Has exterior threads (similar to a normal female).

Center Contact: It has a pin (just as a regular male).

Common Use: Frequently encountered on Wi-Fi routers or access points.

The outer threading still distinguishes male (internal threads) from female (external threads), however the middle pin/receptacle is flipped when compared to a conventional SMA.

Why reverse polarity?

The fundamental rationale for the widespread usage of RP-SMA, especially in consumer Wi-Fi equipment, was to prevent users from readily adding aftermarket (sometimes higher-gain) antennas. Manufacturers used RP-SMA to comply with certain regulatory bodies (such as the FCC) that limit wireless devices' effective radiated power, or to encourage the use of their proprietary antennas. While the availability of RP-SMA antennas has effectively negated this objective, the standard remains in place.

How to Select the Right Connector

To prevent expensive errors and maintain excellent signal integrity, perform these steps:

Identify the device's connector. Check the port on your network, antenna, radio, or cable.

Examine the Threads: Are the threads within or outside the barrel?

Inside Threads (often a male connection)

Outside Threads (often a female connection)

Examine the Center Contact. Is there a pin or a hole/receptacle?

Determine the kind (SMA or RP-SMA).

An SMA-Male connection is one that has internal threads and a central pin.

An RP-SMA-Male connection is one that has internal threads and a center hole.

An SMA-Female connection is one that has exterior threads and a central hole.

An RP-SMA-Female connection is one that has exterior threads and a central pin.

Choose the Mating connection: When working with RP-SMA, you must use a connection with the opposite gender and polarity.

SMA-Male mate with SMA-Female.

RP-SMA-Male mate with RP-SMA-Female.

Simple Rule of Thumb for SMA/RP-SMA: If your device has an exterior thread with a pin (RP-SMA Female), it requires an interior thread with a hole (RP-SMA Male). If your device has an exterior thread with a hole (SMA Female), it requires an interior thread with a pin (SMA Male).

Conclusion

While the terms "jack vs. plug" and "RP-SMA vs. SMA" might be confusing at first, understanding the basic concepts of external/internal threads and the central pin/hole reversal for RP-SMA simplifies the choosing process. Always double-check the connections on your current equipment before purchasing cables or antennas to guarantee a flawless, high-performance compatibility. A clean connection indicates a clear signal!

Contact Us