#rf connector

Introduction

Panel antennas are critical components of modern wireless communication systems, designed to provide focussed signal transmission and reception. These antennas are frequently used in telecom, Wi-Fi, IoT, and industrial applications that demand both directional coverage and high gain.

Eteily Technologies offers a wide range of panel antennas designed for durability, efficiency, and outstanding signal performance.

What is a panel antenna?

A panel antenna is a directional antenna that emits signals in a specified direction rather than distributing them in all directions. This targeted radiation pattern enhances signal strength and eliminates interference.

These antennas are widely utilized in both indoor and outdoor applications requiring robust and long-range communication.

Key Features of Panel Antennas

High Gain Performance: Typically varies from 10 dBi to 18 dBi, ensuring powerful signal transmission.

Directional Coverage - Focuses the transmission in one direction for improved efficiency.

Compact and flat design, easy to place on walls, poles, or towers.

Weather-resistant construction - Suitable for outdoor applications with tough materials like ABS or fiberglass.

Wide Frequency Support - Compatible with GSM, 4G, Wi-Fi, and LoRa applications.

Types of Panel Antennas

1. Outdoor Panel Antenna

These antennas are designed for outdoor use and allow long-range communication while also withstanding extreme weather conditions.

2. Patch Panel Antenna.

A popular kind used in telecom and IoT systems, with a small size and good signal performance.

3. MIMO Panel Antenna.

Supports numerous input and output signals, which are widely used in sophisticated wireless systems such as 4G and 5G.

Panel Antenna Applications:

Panel antennas are frequently utilized in various industries, including:

Telecommunication networks (GSM, 3G, 4G, and 5G) Wi-Fi and WLAN systems Internet of Things and LoRa communication Signal boosters and repeaters Industrial wireless networks

They are especially useful in situations when long-distance and steady directional communication is required.

Why Choose Eteily Technologies' Panel Antennas?

Eteily Technologies provides high-performance panel antennas, including:

Strong and waterproof design.

High gain for better signal coverage.

Easy installation (wall or pole mounting)

Customization possibilities for cables and connectors

Consistent performance across numerous frequency bands.

Conclusion

Panel antennas are an effective approach for improving wireless communication systems. They are suitable for both commercial and industrial applications due to their directional capabilities, high gain, and long-lasting design.

If you're seeking for dependable and efficient panel antennas, Eteily Technologies offers a variety of options adapted to your connectivity requirements.

Contact Us

Eteily Technologies India Pvt. Ltd.

📫 Address: B28 Vidhya Nagar, Near SBI Bank,

 📍  District: Bhopal, PIN: 462026, Madhya Pradesh

Introduction

In modern wireless communication systems, reliable signal transmission is crucial. One of the most widely used components that ensures stable RF connectivity is the SMA connector. Known for its compact size, threaded coupling, and excellent performance, SMA connectors are a preferred choice in RF and microwave applications.

At Eteily Technologies, we provide high-quality SMA connectors designed for durability, precision, and optimal signal integrity across various industries.

What is a SMA connector?

An SMA (SubMiniature Version A) connector is a coaxial RF connector that connects cables and devices in radio frequency systems. It features a threaded interface to ensure a secure and robust connection.

These connectors typically have a 50-ohm impedance and can support frequencies ranging from DC to 18 GHz or more, making them ideal for high-frequency applications.

Key Features of SMA Connectors

1. Compact size.

SMA connectors are small and lightweight, making them excellent for use in compact electronic devices and PCB designs.

2. Threaded Coupling Mechanism.

The screw-type coupling provides a tight, vibration-resistant connection, lowering the chance of signal loss.

3. High-frequency performance.

They are commonly utilized in microwave and RF systems because of their capacity to handle frequencies of 18 GHz and higher.

4. Excellent signal integrity.

SMA connectors reduce signal reflection while maintaining performance through consistent impedance regulation.

5. Wide Compatibility.

Available in a variety of configurations, including straight, right-angle, PCB mount, and cable mount, making them useful for varied applications.

Types of SMA Connectors:

1. SMA male connector.

Features a central pin.

External threads for connection.

2. SMA female connector.

Contains a central socket (sleeve).

Internal threads for mating.

3. Reverse Polarity SMA(RP-SMA)

Used in Wi-Fi devices.

Pin and socket configurations are flipped.

4. PCB Mounted SMA Connectors

Applied directly on circuit boards.

Available in vertical and right angle forms.

5. Cable Mounted SMA Connectors

Designed for coaxial cables such as RG58 and RG174.

Technical Specifications

Applications for SMA Connectors

SMA connectors are widely utilized in a variety of industries due to their performance and reliability.

Wireless Communication Systems (4G/5G and Wi-Fi)

RF antennas and modules

GPS and GNSS Devices

Test and Measurement Equipment

IoT and Embedded Systems Telecom Infrastructure

They are particularly popular in antennas, filters, amplifiers, and RF modules where reliable signal transmission is required.

Advantages of using SMA connectors:

Secure and steady connection.

High endurance in severe conditions.

Minimal signal loss.

Compact and lightweight.

Easy to install and maintain.

Why Choose Eteily Technologies' SMA Connectors?

Eteily Technologies specializes in the manufacture and supply of high-quality RF components. Our SMA connectors offer:

High-precision engineering

Superior signal performance.

Long-term durability

Compatibility with various RF systems

Competitive pricing for bulk orders.

Whether you're creating RF systems or upgrading existing ones, our SMA connectors provide smooth connectivity and performance.

Conclusion

SMA connections are an integral component of current radio frequency and wireless communication systems. Their compact size, high-frequency capability, and dependable threaded connection make them a popular choice among engineers and manufacturers worldwide.

If you require high-quality SMA connections for your project, Eteily Technologies offers dependable solutions adapted to your specifications.

Contact Us

Eteily Technologies India Pvt. Ltd.

📫 Address: B28 Vidhya Nagar, Near SBI Bank,

 📍  District: Bhopal, PIN: 462026, Madhya Pradesh

Introduction to FME Connectors.

The FME connector (For Mobile Equipment) is a tiny RF coaxial connector that is commonly used in mobile communication, GPS, cellular antennae, and RF cable assemblies. The FME connector, known for its tiny size, lightweight construction, and dependable electrical performance, is especially popular in applications that require space-saving and easy installation.

Unlike bigger RF connectors like SMA or N-type, FME connectors are designed for low to mid-frequency RF transmissions and are commonly used in automotive, telecom, and IoT systems.

What is an FME Connector?

An FME connector is a threaded RF coaxial connector intended particularly for mobile and cellular equipment. It normally runs at up to 2 GHz, making it appropriate for GSM, LTE, GPS, and ISM-band applications.

Key Characteristics:

Threaded coupling provides a secure connection.

Compact form factor.

Low insertion loss.

Designed for RG series coaxial cables.

Types of FME Connectors.

FME connectors are available in a variety of configurations to accommodate different cable types and installation requirements.

1. FME Male Connector.

External thread.

Internal pin

Typically used on antenna wires.

Frequently connected to FME female adapters or devices.

2. FME Female Connector.

Internal thread

Receptacle Contact

Typically seen on RF equipment and adapters.

3. Straight FME connector.

Linear cable exit.

Perfect for low-profile installations.

4. Right-angle FME Connector

90-degree cable orientation.

Used in tight or tiny enclosures.

5. FME to SMA, FME to N, and FME to BNC adapters.

Enable compatibility with many RF systems.

Commonly used in telecom integration and antenna improvements.

Technical Specifications of FME Connectors

Applications for FME Connectors

1. Cellular Antenna Systems.

GSM, LTE, NB-IoT, and LTE-M antennas

Mobile Signal Boosters

2. GPS/GNSS Devices

Vehicle Tracking Systems

Navigation modules

3. Automotive electronics

Telematics Units

Fleet management systems

4. Wireless Communication Equipment.

RF modems

Routers and Gateways

5. IoT/M2M Devices

Smart Meters

Remote monitoring systems

Advantages of using FME connectors:

Smaller than SMA connectors.

Convenient cable routing in tiny devices

Reduced mechanical stress on the cables

Ideal for low to medium RF frequencies.

Excellent balance between performance and cost.

FME Connector vs SMA Connector (Quick Comparison)

Conclusion

The FME connector is a dependable and cost-effective option for RF applications such as cellular, GPS, automotive, and IoT that require compact size and consistent performance. Its versatility, ease of installation, and compatibility with standard RF cables make it a popular choice for current wireless systems.

To achieve the best performance, choose an FME connector that is compatible with your cable type, frequency range, and environmental conditions.

Contact Us

Eteily Technologies India Pvt. Ltd.

📫 Address: B28 Vidhya Nagar, Near SBI Bank,

 📍  District: Bhopal, PIN: 462026, Madhya Pradesh

Introduction to SMC Connector

The SMC (SubMiniature version C) connector is a small, snap-on RF coaxial connector developed for applications where space, weight, and rapid mating are important. SMC connectors are commonly used in wireless modules, antennas, test equipment, and tiny RF devices, with average operating frequencies of up to 10 GHz.

SMC connectors connect/disconnect faster than SMA connectors thanks to a snap-on mechanism, making them excellent for applications that demand frequent mating without the use of tools.

What is an SMC Connector?

An SMC connector is a 50-ohm RF coaxial connector that uses a push-on (snap-fit) coupling rather than threads. It is smaller than SMA but slightly larger than SMB, providing an excellent mix of performance and ease of use.

Key Features of SMC Connectors

Snap-On Coupling: Fast connection without threading.

Compact size - ideal for dense PCB layouts.

Frequency Range: DC to 10 GHz

Impedance - 50 Ω

Moderate mating cycles—typically 100-500 cycles.

Lightweight design, ideal for portable devices.

SMC Connector Types:

SMC connectors come in a variety of configurations to accommodate various RF assemblies:

1. SMC Male Connector

Snap-on plug design

Commonly used in cable assembly.

Used for antenna and RF module connections.

2. SMC Female Connector

Receptacle Style

Used for PCBs, RF modules, and enclosures.

3. Straight SMC Connector.

Minimal signal loss.

Used for linear cable routing.

4. Right-Angled SMC Connector

Saves space on PCBs.

Common in tiny electronic gadgets.

Electrical Specifications of SMC Connectors

Parameter Specification

Impedance 50 Ω

Frequency Range DC to 10 GHz

VSWR ≤ 1.3 (typical)

Insertion Loss Low (application dependent)

Dielectric PTFE

Operating Temperature −40°C to +85°C (typical)

Mechanical Specifications

Coupling Mechanism: Snap-On

Body Material: Brass/Stainless Steel

Plating: gold or nickel

Center Contact: Beryllium Copper

Mating Durability: 100 to 500 cycles.

SMC Connector vs SMA Connector

Feature SMC SMA

Coupling Snap-on Threaded

Size Smaller Slightly larger

Max Frequency 10 GHz 18 GHz+

Connection Speed Very fast Slower

Vibration Resistance Moderate High

SMC connectors are favored for compact and quick-connect applications, but SMA connections are better suited for tough conditions.

Cable Assembly with SMC Connectors

SMC connectors are typically built with:

RG-174

RG-316

RG-178

Low-loss micro coaxial cables

These assemblies are commonly utilized in embedded wireless systems.

Applications for SMC Connectors

1. Antenna connections.

Wi-Fi, LTE, GPS and ISM band antennas

Compact antenna modules.

2. Wireless Communication Modules.

IoT gadgets

Cellular modems

GNSS receivers

3. Test and Measurement Equipment

RF Signal Testing

Temporary measuring setups.

4. Automotive Electronics

Information and entertainment systems

Telematics modules

5. Medical and Industrial Devices

Portable diagnostic equipment.

Compact RF sensor systems.

Advantages of using SMC connectors:

Faster assembly and maintenance

Reduced installation time.

Compact footprint.

Reliable RF performance at 10 GHz

Limitations of SMC Connectors

Lower vibration resistance compared to threaded connectors.

Not suitable for outdoor or high-shock settings.

In comparison to SMA, it has a limited frequency range.

Choosing the Right SMC Connector.

When choosing an SMC connector, consider:

Operating Frequency

Cable Type and Diameter

PCB or cable mounting requirements

Environmental circumstances.

Required mating cycles

Conclusion

The SMC connector is ideal for tiny, high-frequency RF applications that require quick connection, small size, and dependable performance. SMC connectors, while not ideal for harsh environments, are frequently used in IoT, antennas, wireless modules, and test systems.

For modern compact RF designs, SMC connectors provide a reasonable balance of performance, size, and ease.

Contact Us

Eteily Technologies India Pvt. Ltd.

📫 Address: B28 Vidhya Nagar, Near SBI Bank,

 📍  District: Bhopal, PIN: 462026, Madhya Pradesh

Introduction:

In the field of radio frequency (RF) communication, each component is critical to maintaining signal integrity. Among them, the simple N Male to SMA Male cable assembly frequently works in the background, but it is a vital link between numerous RF equipment.

Eteily Technologies recognizes that a cable is never "just a cable." It's a precision-engineered conduit that transports crucial messages. This blog article will go over why this particular cable assembly is so vital, its common uses, and why selecting a high-quality product is critical for maximum system performance.

What is the N Male to SMA Male Cable Assembly?

Let us break down the name.

The N-type connector (Male) was developed by Bell Labs in the 1940s and is a medium-sized, threaded, weatherproof RF connector that is routinely used for frequencies up to 11 GHz (and potentially higher with precision versions). Its sturdy construction makes it popular for outdoor and industrial use. "Male" indicates that the connection has a central pin and an inner thread.

SMA Connector (Male): The SMA connector, which stands for "SubMiniature Type A," is a tiny, threaded coaxial connector suitable for frequencies up to 18 GHz (or 26.5 GHz for precise versions). It is widely utilized in microwave systems, Wi-Fi devices, and tiny RF modules because to its small size and dependable performance. "Male" implies that it has a central pin and an outside thread.

Cable Assembly: This is the coaxial cable itself, with the N Male connection crimped or soldered to one end and the SMA Male connector on the other. The flexibility, impedance, and loss properties of a coaxial cable are determined by its type (for example, RG58, RG174, or LMR-series equivalent).

Essentially, this cable assembly connects an N-type female port (for example, on a high-gain outdoor antenna or base station) to a SMA female port.

Where are these cables used? Common Applications

Because of its adaptability, the N Male to SMA Male cable is a popular option in a variety of sectors.

Wireless Infrastructure and Telecommunications:

Outdoor cellular antennas (N-type) are linked to indoor or enclosed cellular modems/routers (SMA-type) in remote monitoring stations, industrial IoT installations, and fixed wireless access points.

Connecting base station equipment with external antennas.

2. Internet of Things and Machine-to-Machine (M2M) Communications:

Linking outside LoRaWAN, Sigfox, or NB-IoT antennas to IoT gateways or industrial sensor hubs using SMA ports.

Connecting remote environmental monitoring devices, smart agricultural sensors, and asset trackers.

3. GPS/GNSS Systems:

While many GNSS receivers use SMA connections, more durable, outdoor-rated GNSS antennas use N-type connectors. This cable makes connections easier, and it is commonly used for precision agriculture, fleet management, and mapping applications.

4. Test and Measurement:

These cables are critical for labs and field workers because they link diverse RF test equipment (spectrum analyzers, network analyzers) with multiple connection types for system diagnostics and validation.

5. Amateur Radio and Hobby Projects:

Designed to link bigger outside antennas to smaller transceivers or SDR (Software Defined Radio) equipment.

Why Quality Matters: The Eteily Technologies Difference.

When it comes to RF, every milliohm of resistance and every millimeter of impedance mismatch can reduce performance. Here's why purchasing a high-quality N Male to SMA Male cable assembly from Eteily Technologies is critical:

Low Signal Loss (Attenuation): Cheap cables can cause severe signal loss, particularly over long distances or at higher frequencies. Eteily's assemblies employ premium coaxial cables (e.g., LMR-equivalent or comparable low-loss cables) that reduce attenuation, allowing more power to reach your antenna or receiver.

Optimal Impedance Matching: All of our cables are properly made with a 50-ohm impedance, which matches the majority of RF systems. This eliminates signal reflections (high VSWR), which can lead to power outages and damage to transmission equipment.

Durable, Weatherproof Connectors: The rugged, weatherproof construction of the N-type connection is essential for outdoor applications. Eteily provides high-quality connection termination that is resistant to moisture and corrosion, ensuring long-term dependability in severe settings.

Superior Shielding: High-quality braiding and foil shielding insulate your communications from electromagnetic interference (EMI) and radio frequency interference (RFI), resulting in a clean and reliable data stream.

Reliable Termination: The connection between the cable and the connector is a frequent source of failure. Eteily's cable assembly incorporate expert crimping and soldering procedures to provide secure, reliable, and long-lasting connections.

Customization Options: We recognize that off-the-shelf isn't always sufficient. Eteily Technologies provides bespoke lengths and cable types to properly meet your individual application, reducing surplus cable (which can lead to loss) and assuring a clean installation.

Conclusion: Connect with Confidence.

An N Male to SMA Male cable assembly may appear to be a minor component of your total RF system, but its performance has a direct influence on the setup's durability and efficiency. From guaranteeing a strong signal for an IoT sensor in a remote field to connecting important telecom infrastructure, the quality of this cable is uncompromising.

Contact Us

Eteily Technologies India Pvt. Ltd.

📫 Address: B28 Vidhya Nagar, Near SBI Bank,

 📍  District: Bhopal, PIN: 462026, Madhya Pradesh

Choose the Right Connector Gender: Jack vs. Plug, RP-SMA vs. SMA

In the realm of radio frequency (RF) communication, picking the perfect connection is just as important as selecting the right antenna or cable. Mismatched connectors can cause annoyance, signal loss, and even damage to your equipment. One of the most prevalent sources of misunderstanding is connection gender (jack vs. plug) and the specialist designation RP-SMA vs. SMA.

Let's clear up some confusion about these words so your next RF setup goes smoothly and efficiently.

Jack vs. Plug: A Universal Rule

The fundamental rule for connector gender in RF, like with other electrical connections, is rather intuitive:

Plug (Male): A plug is often a connection with a central pin. It "plugs into" the other connection.

A jack (female) is a connection having a central receptacle/hole. It "receives" a plug.

Consider an electrical wall outlet (jack) and the plug on your appliance wire. The same logic applies here.

Visual Aid:

Threads are often found on the inside of a plug's shell.

Threads are often seen on the exterior of a jack's shell.

This standard covers practically all RF connector types, including BNC Connector, N-Type Connector, TNC Connector, and, of course, SMA Connector.

RP-SMA vs SMA: The Reversal Twist

This is when things become a bit more precise, which might lead to confusion. SMA (SubMiniature A) connections are widely used in Wi-Fi, cellular, and other tiny RF devices. The "RP" in RP-SMA represents Reverse Polarity.

This "reverse polarity" does not indicate that the electrical polarity is reversed; rather, it refers to the reversal of the gender of the central pin in relation to the conventional convention.

Let us break it down:

1. Standard SMA (SMA-male and SMA-female).

SMA Male (Plug):

The outer shell contains internal threads.

The center contact has a pin.

Common Applications: Frequently encountered on wires that connect to gadgets.

SMA Female (Jack):

Outer Shell: Has external threads.

Center Contact: Has a receptacle/hole.

Common Use: Frequently used as a port on gadgets or antennas.

Reverse Polarity SMA (RP-SMA-Male and RP-SMA-Female)

RP-SMA-Male (Plug)

Outer Shell: Has internal threads (similar to a regular male).

Center Contact: Most importantly, it has a receptacle/hole (like a conventional female).

Common applications include Wi-Fi router or access point antennas.

RP-SMA Female (Jack):

Outer Shell: Has exterior threads (similar to a normal female).

Center Contact: It has a pin (just as a regular male).

Common Use: Frequently encountered on Wi-Fi routers or access points.

The outer threading still distinguishes male (internal threads) from female (external threads), however the middle pin/receptacle is flipped when compared to a conventional SMA.

Why reverse polarity?

The fundamental rationale for the widespread usage of RP-SMA, especially in consumer Wi-Fi equipment, was to prevent users from readily adding aftermarket (sometimes higher-gain) antennas. Manufacturers used RP-SMA to comply with certain regulatory bodies (such as the FCC) that limit wireless devices' effective radiated power, or to encourage the use of their proprietary antennas. While the availability of RP-SMA antennas has effectively negated this objective, the standard remains in place.

How to Select the Right Connector

To prevent expensive errors and maintain excellent signal integrity, perform these steps:

Identify the device's connector. Check the port on your network, antenna, radio, or cable.

Examine the Threads: Are the threads within or outside the barrel?

Inside Threads (often a male connection)

Outside Threads (often a female connection)

Examine the Center Contact. Is there a pin or a hole/receptacle?

Determine the kind (SMA or RP-SMA).

An SMA-Male connection is one that has internal threads and a central pin.

An RP-SMA-Male connection is one that has internal threads and a center hole.

An SMA-Female connection is one that has exterior threads and a central hole.

An RP-SMA-Female connection is one that has exterior threads and a central pin.

Choose the Mating connection: When working with RP-SMA, you must use a connection with the opposite gender and polarity.

SMA-Male mate with SMA-Female.

RP-SMA-Male mate with RP-SMA-Female.

Simple Rule of Thumb for SMA/RP-SMA: If your device has an exterior thread with a pin (RP-SMA Female), it requires an interior thread with a hole (RP-SMA Male). If your device has an exterior thread with a hole (SMA Female), it requires an interior thread with a pin (SMA Male).

Conclusion

While the terms "jack vs. plug" and "RP-SMA vs. SMA" might be confusing at first, understanding the basic concepts of external/internal threads and the central pin/hole reversal for RP-SMA simplifies the choosing process. Always double-check the connections on your current equipment before purchasing cables or antennas to guarantee a flawless, high-performance compatibility. A clean connection indicates a clear signal!

Contact Us