Work Gearz

10 Best Slip-on Work Boots Review and Buying Guide

Work boots are the best way to protect your feet from any accidents that can occur at a workplace that deal with heavy machinery, construction sites, or any other hazardous occupation.

With an increase in demand for more comfort and convenience, while working at such places, brands came up with the slip-on work boots version for protective footwear.

Today I’m going to reveal the best slip-on boots available in the market right now to help you make a more informed decision before investing in one.

Advantages of Slip-on Work Boots

Let’s take a look at some of its advantages.

1.) Slip-on boots are quick and easy to wear. Especially when in a hurry, as they don’t have any laces to be tied.

2.) They are extremely comfortable to be in while working as they reduce the stress with added cushioning in the footbed. Plus, without the laces tightening your feet.

3.) Most of these work boots come with a safety toe feature for protection against occupational hazards like falling objects and sharp items.

4.) The outsoles are made to be slip and oil resistant, adding to the safety measures needed for work boots.

5.) Slip-on work boots keep your feet warm during cold harsh winter days due to the insulation feature.

6.) These work boots are made to last for years to come with their strong and sturdy leather material.

7.) It is easy to clean slip-on boots as they don’t have any laces and tongue to be cleaned. It is one layer of fabric or material that needs to be wiped clean.

8.) They can be worn outside of work with casual attire, as they are quite stylish to look at, keeping the western design in mind.

Features to Consider While Buying Slip-on Boots

Before you decide to buy slip-on work boots, consider the below features that they should have to be useful.

1.) The material or fabric used in the making of the boots is very important as they determine their durability. Ideally, leather and rubber boots are what you should think of investing your money on.

2.) The feet should be comfortable throughout the day in the boots, hence, check the cushioning in the insoles.

3.) The boots should have a safety toe feature based on the type of work or job the person does.

4.) They should be able to provide good arch support and reduce strain or fatigue, as you will be wearing them all day long.

5.) The Insulating feature is an essential one. Your feet should be able to breathe in the boots and remain cool and dry when needed.

Slip-on Boots Best for…

Georgia Boot Men’s Georgia Giant High Romeo GR500 Work Boot Best for construction sites, heavy machinery factories, slippery surfaces, oily surfaces, wet environments, and rough weather conditions

Carhartt Men’s 4″ Romeo Waterproof Breathable Best for workplaces with electrical hazards, wet environments, slippery surfaces, and oil factories

Skechers Men’s Relaxed Fit Best for electrical hazards workplaces

Ariat Men’s Spot Hog Western Cowboy Boot Best for construction sites, yard work, slippery surfaces, oily surfaces, and woodwork factories

Stanley Men’s Dredge Steel-Toe Work Boot Best for construction sites, factories dealing with heavy machinery, slippery surfaces, and oil/petroleum factories

Wolverine Men’s Raider Twin-Gore Romeo Steel-Toe Best for construction sites, heavy machinery factories, and electrical hazardous workplaces

RedbacK Boots USBBK Easy Escape Steel Toe Best for construction sites, heavy machinery factories, wet environments, oily surfaces, and slippery surfaces

KEEN Utility Men’s Detroit Slip-On Best for construction sites, heavy machinery factories, slippery surfaces, oil factories, and wet environments

ROCKROOSTER Work Boots for Men Best for wet environments, slippery surfaces, oily surfaces, mechanics, welders, construction sites, and heavy machinery factories

Blundstone Work Series 990 Best for mine workers, slippery surfaces, oily surfaces, chemical factories, and wet environments

10 Best Slip On Work Boots

1.) Georgia Boot Men’s Georgia Giant High Romeo GR500 Work Boot

Georgia Men’s Giant High Romeo Gr500

Ankle-high work boot featuring side goring insets and dual pull loops

Full-grain leather Good Year welt construction

High performance lining steel shank

EVA midsole. Mesh covered cushion footbed. Round toe shape

$89.95 Buy on Amazon

Prices pulled from the Amazon Product Advertising API on: 12/3/2020 8:36 PM

Giant High Romeo Workboots by Georgia come in various sizes and are constructed from 100% full-grain leather with Goodyear Welt construction technology and synthetic sole. The polyurethane outsole and bumper guard make them oil and slip-resistant.

For safety measures, the boots have a steel toe that protects hazardous workplaces. Its shaft measures roughly 5 inches from the arch, and the heel measures around 1.25 inches. It features side goring insets and dual pull loops making them easy to slip into and slip out from.

They also have a high-performance lining steel shank in the midsole that aids in additional arch support and comfort. There is also an EVA midsole which is a mesh-covered cushion footbed for added cushioning.

Check Price and Reviews on Amazon

2.) Carhartt Men’s 4″ Romeo Waterproof Breathable CMS4100

Carhartt Men’s 4″ Romeo Waterproof Breathable

While the majority of buyers have indicated the Romeo line of boots fits as expected, we have heard from a few customers that these boots fit 1/2 size smaller than expected. This item qualifies for FREE returns either way.

$114.99 Buy on Amazon

Prices pulled from the Amazon Product Advertising API on: 12/3/2020 8:36 PM

These slip-on Romeo work boots by Carhartt are made of 100% leather and rubber soles. It is engineered with a waterproof membrane called Storm Defender that does not allow water to seep in, plus it keeps your feet dry from perspiration as it is also moisture-wicking.

The rubber outsole is slip, chemical, and oil resistant. They come with an Ortholite insole for added comfort and cushioning. They are also breathable which makes them an excellent choice for the summers.

Check Price and Reviews on Amazon

3.) Skechers Men’s Relaxed Fit Segment – Dorton Boot

Skechers USA Men’s Segment-Dorton Chelsea Boot

Relaxed Fit design for roomy comfortable fit

Gel infused memory foam cushioned comfort insole

dual side elastic for easy slip on fit

Shock absorbing midsole

flexible rubber traction outsole for durability

$69.95 Buy on Amazon

Prices pulled from the Amazon Product Advertising API on: 12/3/2020 8:36 PM

These slip-on work boots by Skechers are made from 100% leather and rubber sole. The upper of the boots is oiled. The shaft measures around 5 inches from the arch and the boot opening is roughly 10.5 inches around.

It has a rounded plain toe-front and the sides are embossed with an S logo. They have a relaxed fit design for more wiggle room inside and a comfortable fit.

There is a gel-infused memory foam cushioned comfort insole for added support and comfort. The midsole is shock absorbent.

For an easy slip-on fit, there are dual side elastic and leather side panels. For durability, they are designed with a flexible rubber traction outsole. It comes with reinforced stitched seams and soft fabric boot lining.

6 BEST WORK BOOTS FOR TILE SETTERS, PRINCETON

Are you looking for the best work boots for tile setters? Getting a good pair of shoes need not be difficult, but if your work ends up destroying your best buys, maybe you need to consider what actually is the best for you and your work.

Tile setting is a task that requires a lot of manual labor. You have to work with some heavy tools at times, if not always, have to continuously walk on slippery surfaces, and walk on the gravel surface prior to the tile setting. Even the tile setting job itself requires a lot of pressure on the shoes.

As you kneel or bend while working, your shoes surface a great deal of pressure as your toes are curled. The stress is then spread out to the heels of the boots and even the outsoles. All in all, your work demands a lot from you and your work boots.

Hence, this results in quick wear in the toe area along with excruciating pain in the foot. Along with magnifying the problem of previous injuries, ill-fitting and non-specialty boots can lead to slippage and injuries.

While good quality boots might run you for a few months, only the very best tile setting work boots will last you a long time. In fact, these boots come with an excellent non-slip grip that ensures no slipping on the tiled surface, and also right outsoles that run for a long time without wearing off.

Luckily, you’ve come to the right place as this guide will help you find the best work boots for a tile setter. But first, let us consider some features of these work boots.

Features to Look for in Tile Setter Boots

1.) Waterproof membrane

There is nothing worse than getting some liquid into your shoes while working, especially as you set tiles. Boots that absorb water prove to be a great nuisance. A waterproof membrane in work boots for tile setters can help shield your feet against any liquid while you finish the flooring process.

Remember, despite the waterproof membrane; the shoes should be breathable enough for fresh, irritation-free feet. Hence, look for shoes with a fast-dry lining.

2.) Safety Toes

Skilled workers deal with an abundance of daily hazards, and the only thing to save you against a misfortunate incident is your protective gear.

Your work shoes should come with steel toes, preferably unsymmetrical, to safeguard you against any potential ill-happenings. The metal housing of the isolated toes protects against tiling tools and shoe wear and tear.

3.) Electrical hazard protection

While we are talking about hazards, why not eliminate all the possible ones you could come across. Tile setting work comes with limited electrical exposure, but it is always best to be prepared rather than be sorry.

Shoes with electrical hazard protection shield you from any live wires or electrical short circuits. Hence, you can accomplish your flooring work without a worry.

How to Tell If Shoes Are Slip Resistant? 

 Slip-resistant shoes are the best when it comes to save-guarding your hard-earned money on medical bills. Hospice or health care centers are the ones who benefit from your lack of expertise and frugality.

Saving is not a bad having but pinching pennies on things that put your safety in question it is not a great idea. You must know how to tell if shoes are slip-resistant as upon it lay the burden of your safety.

The slip-resistant shoes are a must for people working in dire conditions giving them the additional safety and security that is otherwise missing. Here are a few perils of that may plague you for not getting slip-resistant boots –

Risks of NOT having Slip Resistant Boots

1.) Getting Tripped

It is one of the most potential perils that cause many a roofer to visit a hospice if they are not careful enough. You may trip over anything from loose debris to materials, leaves, branches, and even small stones!

Getting Tripped

The big thing is that all these are potential tripping hazards that may lead you to break your neck if you do not have slip-resistant boots to support you. If you do not wish to end up in a hospice it is best to buy this preventive measure!

2.) Perilous Weather

It always pays to keep a careful eye out for capricious weather conditions. Often you may counter the extremes from cold to heat, from snow to hail, from light to heavy rain but that does not mean you should fall prey to it.

Perilous Weather

By investing in the right pair of boots you can ensure that a change of climate you do not affect and trouble you at all!

3.) Slippery Surfaces

The slippery surfaces also promote a great hazard. In a rainy climate, the roof is supposed to be drenched with water. If the water does not get dried up within the limited period a layer of moss starts growing up.

Slippery Surfaces

Without proper measures, an accident is bound to happen that may be avoided by investing in a proper pair of slip-resistant boots.

4.) Electrical Hazard

It may not seem much but there is a high chance of getting electrocuted up for some when they are working, especially if the work in construction or electricity. Without the right pair of protection in place, you are vulnerable to get struck by lightning or electric line.

electrical-safety

You may also get electrocuted by an electric socket while working. But by investing in the slip-resistant boots you would be able to just get off with minor injuries and without a visit to the medical emergency unit.

How to Recognise Slip-resistant Shoes?

Now that we have established how perilous it is for you to buy a pair of shoes that are not slip-resistant, it is time to learn how to recognize and buy them. Sellers may just put a tag on the shoe to be slip-resistant if it means that they get to sell it.

But not every shoe can claim the title of being slip-resistant! Here are a few checker pints to keep in mind before buying a slip-resistant shoe.

1.) Tread Check

Treads come in very handy when it comes to detecting slip and oil resistant. Most people do not realize how easy it is to recognize types of shoes through their tread marks. Most treads come in different shapes making it somewhat easy to recognize the shoe type as a singular tread pattern is used in different shoes.

treads in slip-resistant shoes

The treads in slip-resistant shoes come in the shape of circles or hexagons. These shapes are used to ensure that the treads can move when it comes to moving the liquid out of the shoe to prevent you from slipping or falling. The smaller or bigger tread shapes, when manufactured in the large qualities, works best when it comes to prevention of slips.

2.) The Revealing Soles

Just by examining the shape of the shoe sole you would be able to recognize the type of shoes that a seller is offering you. It may seem far-fetched but simply ensuring that the sole of your boots is flat edged you can denote that it is a slip-resistant one.

The reasoning behind it is that flat-edged soles can trap the liquid under your shoe makes you slide proof, much like the tires of the car in the rain. To ensure that you have the right pair to ensure that you have the round side soles.

3.) Putting the Grooves in Question

You may associate a tractor tire to grooves but it plays a mighty hand in differentiating the slip-resistant shoes with the ordinary ones. Slip-resistant shoes have grooves that keep the wearer in an upright position throughout the day.

shoe soles with grooves

This is very much possible because shoe soles with grooves put in them create and support the flexibility of the different shoe parts. This makes them less likely to trap in water in the inside. With the assistance of grooves present in the shoes, it is possible to channelize the liquid out of the sole while keeping you safe.

4.) Test the Bottom

It is probably one of the easiest ways to find out whether or not a certain pair of shoes works for them. It is quite simple to check out the hardness of the soles. You do not want soles that are too hard as it makes them non-malleable.

rubbery soles would stick to the ground better

If the shoe worn by you is not suitable to your conditions then it is not the one for you. Look for a rubber sole. This is primarily because the rubbery soles would stick to the ground better than others. This is possible because the sole is far more pliable as rubber is soft rather than rigidity and hardness that is the copyright of more expensive party wears.

5.) Take them on a Test Drive

Well, you do it with your car why not the same with your shoe do! If you find a shoe with seemingly right qualities it is time to put it to test. You may not be able to find a patch of wet flooring but the ultra-shiny floors of polished wood and linoleum to walk around in.

notice of how your foot moves on the polished surface

While you walk around to try to take notice of how your foot moves on the polished surface. Slide if you have too! While you are sliding ensure that your foot stays in place despite all the sliding on the floor.

If you cannot find the polished floor try to find a bench to sit and run your hand on the sole. This way you would be able to get a better understanding of the sleekness of the shoe. Remember if it is too sleek it is not the one for you.

6.) Online Shoes

If you are someone who loves getting stuff from online at a discount then things might not be as easy. It is impossible to find out the level of the sleekness of the shoe. Since you cannot touch it manually it is important to read through all the reviews before buying it.

Another thing that might be helpful is reading through the description of the shoe that is written description provided by the online store on the web-page. It is not the most trusted bit of information but reading it would give you the needed information that you require to decide between buying the shoe.

Does Regular Shirt Work as Undershirt for Sweating

Undershirts actually originated from the Union Suit, that the then men used to wear beneath their regular shirts or suits in order to protect their skin from the itchy and not so comfortable styling fabric and also to keep themselves cool and to keep away sweat and odor!

As the name suggests, undershirts are meant to be worn under your regular shirts to give you the feeling of comfort and to prevent as well as soak up sweat as they are made of breathable fabric like cotton. While you cannot wear an undershirt as an outerwear, similarly the regular shirts too can’t be worn as an undershirt for sweating unless and until they are made of moisture wicking fabric.

Still, if you are confused wondering does regular shirt work as an undershirt for sweating, let me get your facts correct in this article.

To know more in detail, keep scrolling…

Difference Between a Regular shirt and an Undershirt

To be straight on point, a regular work shirt or t-shirt is what you wear on the outer as outerwear and an undershirt is more like that you wear beneath the regular shirt.

An undershirt fits tight to the skin, more sort of a body hugging thing whereas; a t-shirt serves to enhance your look and style.

Let’s talk about the differences in details:

1.) Thickness of the material:

As undershirts are meant to be worn underneath your regular shirt, they are much thinner and lighter than regular shirts. Regular shirts on the other hand are made of thicker fabric and might be light or heavy depending on the material of which it is made of.

2.) Material:

Undershirts are generally made of very light and breathable fabric like cotton that absorbs sweat and also allows airflow within the body to keep you cool. Regular shirts on the other hand can be made of any material like cotton, nylon, silk, wool, rayon, etc.

3.) Sweat prevention:

As I have mentioned earlier, undershirts are made of breathable fabric that not only allows air flow that keeps away sweat, but also soaks up sweat in case your body gets heated up.

4.) Length:

Undershirts are generally longer than regular shirts because they are to be tucked in inside the pants. Regular shirts on the other hand can be short or long depending on the style of the shirt; whether formal or informal respectively.

5.) Fit:

Regular shirts can be of tight fit depending on the style you choose, but undershirts are only of tight fit because they need to act as a barrier between the body and the outer shirt to keep you comfortable and cool all day long.

6.) Sleeve length:

The sleeve length of the regular shirts may vary ranging from the half sleeve or full sleeve. But undershirts generally come in sleeveless designs; only in rare cases, you might want to search for the short-sleeved ones.

Can you wear regular shirt as an undershirt for sweating?

Though the obvious answer to the question is a BIG NO! Yet, there are certain points you need to know in case you want to wear your regular shirt as an undershirt for sweating.

Undershirts serve the following requirements:

They are to be tight fit. In other words, they need to be body hugging

They are made of breathable fabric

They are made of moisture wicking fabric

They are generally sleeveless so that do not deform the style of your outerwear

They are not collared, so that they do not show up above your outerwear

They are made of soft and comfortable fabric

They are usually longer in length so that you can tuck them in inside your pants

Now, regular shirts do not necessarily fulfill all the above mentioned requirements and if your shirt does, go and wear them as your undershirt!

And even if you might find some points matching, still there will be the following shortcomings:

Regular shirts will never be sleeveless

Regular shirts will not have that deeply cut neck that eases out its way to be worn as an undershirt so that when you wear your outerwear, it does not pop up

Even if your regular shirts would be made of breathable fabric and would soak up sweat, the sweat that is the wet appearance would be shown to the world, which is not the case with undershirts. Undershirts will hide the sweat from the world

What Kind of Gloves for Concrete Work? 

 Working with both wet and dry concrete can pose serious damage to the hands. Therefore hand protection becomes very crucial while working with concrete.

This protection can be offered by a good pair of work gloves that are designed especially for the concrete handling works.

There are various stages of concrete handling from: mixing, pouring, sculpting and handling and there are particular gloves designed for doing all these works.

Work gloves for concrete should be all rounder that is they should be able to offer protection from various things such as they should be waterproof, they should be cut resistant and abrasion resistant, they should be durable and provide anti-slip grip!

In this article I am going to tell you about each of the features required in gloves for concrete work in detail so that you know the essential features required to save your hands form the harmful effects of concrete!

So, let’s get started ASAP!

Required features in gloves while working with wet cement:

If you work with wet cement, you should look for the following features in your work gloves:

It should be made of synthetic rubber like nitrile butadiene

It should be oil resistant

It should have cotton flocking for offering greater comfort

It should have a textured surface for added grip

Required features in gloves while working with dry cement:

If you work with dry cement, you should look for the following features in your work gloves:

It should be made of fully coated materials or top grain leather

It should have anti-slip grip for handling slippery objects

It should be abrasion resistant like the palm should be coated with string knit material

8 Overall features required in gloves for concrete work

Your work gloves for doing concrete work should the following features:

1.) It should be waterproof:

The very first feature that your gloves for concrete work should have is that it should be waterproof. Cement work consists of handling a lot of water related stuffs starting from mixing to pouring to sculpting.

If the gloves are not waterproof then water might soak in the gloves to your hands keeping it wet all day long. Not only water but along with water the harmful concrete particles might also get along the gloves and reach our hands bringing about many harmful effects.

2.) Materials:

Work gloves for concrete should be made of materials such as rubber, nitrile, high-grade plastic, etc. these materials are not porous and are naturally water repellant therefore making it perfect for doing concrete works.

3.) It should be cut resistant:

The gloves should be cut resistant because handling cement and sculpting includes dealing with other heavy tools and equipments which might cut your hands. Therefore, gloves made of cut resistant materials especially in certain areas such as palms and fingers are advisable.

4.) It should offer a good grip:

Handling cement means working with watery and slippery objects and tools because once you touch wet cement, your hands will become slippery and will loose the grip required to hold other tools. Therefore, the gloves should provide a good grip and should be slip-resistant.

5.) It should be abrasion resistant:

Yes working with cement might invite abrasions because your hands would get continuously rubbed against the hard cement surfaces while working. Therefore the gloves should be abrasion-resistant in order to save you from the harsh effects of constant rubbing against hard surfaces especially in the palm areas.

Pull-On Vs Lace-Up Work Boots: Which One to Wear? 

 There has always been a debate around regarding the selection of safety footwear. A pair of work-boots, which is the appropriate pick for you, is just a matter of your style and convenience.

Today we will witness a tug-of-war between Pull-on and Lace-up work-boots!

Quite interesting! The competition will be tough enough.

To be very precise both the pull-on and lace-up work-boots have their own areas of excellence. Neither of them is perfectly better than the other in general terms. Their differences may be glaring but they both offer great benefits. As a matter of fact, lace-up boots give greater ankle support, whereas the pull-on boots are very convenient for wearing and taking off. Still, we ought to justify this contrast. So, stick to the discussion given below.

Witness the comparison between these two types based on better ankle support, ease of wearing and pulling off, protection and comfort level, proper fitting and potential exposure to falls, for their users.

Time to scroll down!

Briefly Defining Both the Work-Boots

What is Pull-On Work-Boots?

These boots come without laces, as the name depicts. They are very easy to wear and take off, involving minimum time period. These boots are mainly meant for workers of oil rigs, who need to pull on and off their work-boots, quite often.

They are constructed into the right shape and size for a proper fit around the foot. Materials like genuine leather, synthetic leather, nylon mesh, and foam are used to manufacture these boots. These boots represent tough and durable footwear.

Check out video on top pull on work boots

Top 10 Best Pull On Work BootsWhat are Lace-Up Work-Boots?

As the name implies, these boots come with a lace material to adjust proper fitting and grip on the feet. These boots offer high ankle support to your feet because of the shoelaces going through the lugs of your boots.

They look and feel rugged and durable. These boots are very popular among construction workers and people involved in outdoor professions. These boots are made of full-grain high quality leather and sometimes rubber and fabric.

Lace-up boots lead to more productivity, look very professional, very durable and can sometimes eliminate the fatigue you need to deal with, every day.

Comparison Table Between Pull-On and Lace-Up Work BootsFeaturesPull-On Work-BootsLace-Up Work-Boots

Proper FitSatisfactory but sometimes may lose shape with time.Very much up to the mark with desired snugness.

ConvenienceMuch easier to wear and pull off. Involves less time.The laces of these boots needs to be tied which takes time and you have to bend or kneel down for that.

ProtectionCan offer great foot protection as long as you make the right choice that suits your profession.The lace system secures your feet making them safer to wear.

Traction LevelProvides better traction by lessening the chances of tripping, slipping or falling down.Here, the laces can sometimes expose you to slips or trips, if they are hanging loose.

Ankle SupportOffers zero degree of support to your ankles. Offers high level of ankle support to your feet.

Features Overviewed in Details:

1.) How well do these boots FitPull-On Work-Boots Fit

It is quite challenging for the pull-on boots to provide proper fit because of their no-laces character. Moreover, if you choose the wrong pair, it will definitely lead to discomfort and pain.

These boots are usually not made for a single individual, unless you customize them. General foot shape is used in these boots rather than the specific one.

They start losing their original shape, in due time. The manufacturers are constantly trying to improve the quality of these work boots, so that they can come out with the best designs that fits your feet.

Lace-Up Work-Boots Fit

The laces in these boots can easily manipulate your fitting criteria. Adjusting the laces can, at times tighten your boots giving you more snugness, and loosening them, giving you more space.

These boots are quite long-lasting. Tying up the laces can sometimes create hassles for you but they can superior comfort and control in the long run.

Lace-up boots keep debris out from your feet. They are designed to give better heel support and lowers your risk of getting injuries. If, by any chance your boots get out of shape in due time, you can still adjust them to fit you nicely, with the help of the laces.

10 Best Welding Pants to Protect Your Legs | Work Gearz 

 Welding as we know can be a dangerous job to do if not wearing the right kind of gear or protective clothing. It requires the person to deal with the heat at high temperatures to fabricate two or more metal, thermoplastic, and/or wood parts together. During the process of welding, sparks and flames are inevitable, hence, it is wise to take precautionary measures before any mishaps.

While we tend to cover our face, hands, and upper body with the appropriate attire or gear during welding, the lower body often is neglected. Result of which burns holes in our pants. For us to avoid this unfortunate and frustrating experience of ruining a perfectly good pair of pants, it is best to invest in a good pair of welding pants. In this article, I will cover some of the best welding pants available in the market, along with tips on how to choose the right welding pants.

Below is a List of the 10 Best Welding Pants

1.) Wrangler Riggs Workwear Men’s Fr Flame Resistant Relaxed Fit Jean

Wrangler Riggs Workwear Men’s Relaxed Fit Jean

Fire resistant finish

Improved fit in the seat, thigh, knee and bottom leg opening

Nomex flame resistant zipper tape

Arc resistant button waistband closure with concealed inner tack reduces heat conductivity

Safety orange outside id for high visibility

Buy on Amazon

Prices pulled from the Amazon Product Advertising API on:

Wrangler Riggs Workwear Men’s Fr Flame Resistant Relaxed Fit Jean is made of cotton denim and is perfectly stylish, comfortable, and very safe that provides the wearer a lot of mobility.

These jeans are certified by both NFPA 70E and NFPA 2112. They meet the requirement of Hazard Rating Category level 2. Has a lot of room through the thighs and legs due to its relaxed fit.

It has a Nomex flame-resistant zipper tape and an arc-resistant button waistband closure with a concealed inner tack that aids in reducing heat conductivity. For increased visibility, it also features a safety orange outside id. They can be machine washed like most other jeans.

2.) ARIAT Men’s Flame Resistant M3 Loose Fit Jean

Ariat Men’s M3 Flame Resistant Loose Fit Jean

Loose-fit jean in medium wash with light hand sanding and contrast stitching

Five-pocket construction

Stitching and logo patch on back pockets

Flame resistance: HRC2, NFPA20, NFPA2112

Buy on Amazon

Prices pulled from the Amazon Product Advertising API on:

ARIAT Men’s Flame Resistant M3 Loose Fit Jean is made of 100% cotton denim, making them lightweight and comfortable.

They meet the safety criteria as per NFPA 20, NFPA 2112, and fall under the HRC (Hazard Rating Category) 2.

These jeans are quite breathable and mobile, due to its loose fit style, making them a perfect choice for hot summer days. They can be easily worn over boots because of their wide boot cut design. An added plus point is they can be machine washed.

3.) Carhartt Men’s Flame Resistant Signature Denim Jean Relaxed Fit

Carhartt Men’s Flame Resistant Signature Denim Jean Relaxed Fit

Carhartt Company Gear Collection

Relaxed straight-leg jean in 11.75-ounce denim featuring five-pocket styling and zip fly with button

Buy on Amazon

Prices pulled from the Amazon Product Advertising API on:

Carhartt Men’s Flame Resistant Signature Denim Jean Relaxed Fit is made of 100% cotton denim. They weigh about 11.75 ounces, making them a lightweight option for people working in hot areas.

These jeans provide a lot of flexibility and mobility due to its relaxed fit design. The double stitches on the main seams make them highly durable like most other jeans.

They do comply with the safety standards of NFPA 70E and NFPA 2112. It features an arc-resistant button closure at the waist, has a brass zipper fly with Nomex zipper tape. Due to its wide boot cut design, it can be worn on top of boots seamlessly, and are machine washable.

4.) Dickie’s Men’s Flame-Resistant Duck Carpenter Jean

The Dickie’s Men’s Flame-Resistant Duck Carpenter Jeans are made of 100% cotton and 11.5 ounces of durable duck.

They are certified by both NFPA 70E and UL, plus by NFPA 2112. It also has an ARC rating of 13 and belongs to level 2 of the Hazard Rating Category or HRC.

The pants very comfortable as it provides a classic fit that sits just a little below the waist. There is a lot of wiggle room through the seat and thighs. It is styled like the classic 5 pockets pants with heavy-duty button closure and a zipper-fly that is made of brass.

For more information, visit

Despite increasing lookout for occupational safety and health during the past century, an estimated 317 million non-fatal occupational injuries and 321,000 occupation fatalities occur globally each year, making 151 workers sustain a work-related accident every 15 seconds according to ILO 2013 (International Labour Organization).

Most of these accidents take place due to the absence of safety gears worn by workers. One of the most important gears of safety is head protection accessory comprising of Full Brim Hard Hats and Cap Style Hard Hat. Moreover, head, being the most important part of a body, safety and protection is needed to be top-notch and uncompromising.

Since the chief objective of these hats is to provide protection, full brim hard hats are a notch above in this category as it gives 360-degree protection of face, ears, neck from sunburn, falling objects, electrical hazards and non-toxic splashes. In short, it offers complete head protection.

Both these hats are capable of providing an extra layer of safety to the workers. Therefore, in this article, you’ll find exact details about both Full Brim Hard Hats and Hard Caps, their differences, which one you should choose and why.

Comparison Table Between Full Brim and Hard Hats Caps

Though there are not many differences between these two types, still a comparison table is given below for better information:

Features Full brim hatsHard caps

MaterialHigh-density polythene.Metals, fibreglass and sometimes rigid plastic.

Natural ProtectionProvides all round protection to head and face from sunrays and rain.Protection of head, forehead and partial face.

Way of WearingBrim should be pointing straight ahead.Suspension should fit properly on the nape of the neck with the hood facing forward.

Comfort LevelLight weighted with superior retention and balance.Light weighted, adjustable, with a secure fit.

HazardsProvides additional protection to one’s head, face, ears and back of the neck.Secures one’s forehead and half of the face only.

UsersConstruction workers, electricians, utility workers,

people working in steel factories

and farmers.Industrial, construction, factory workers etc.

PriceFrom $8 – $120.From $4 – $335.

Features of Full Brim and Hard Caps

1.) Material Used

Full Brim Hard Hats are generally made of HDPE or High-Density Polythene.

Hard hat caps were initially made of metals, later fibreglass was used and now it is rigid plastic.

2.) Colour Classification

Full Brim Hats are available in various colours on the basis of job profile like-

White for site managers, foremen, engineers and supervisors.

Yellow for general labourers and operators.

Blue for carpenters, technical operators and electricians.

Green for safety inspectors and sometimes new workers.

Orange for signallers, lifting men and banks-man slingers.

Red for fire marshal.

Brown for welders.

Grey for visitors on site.

Black, also for supervisors.

Hard Hat Caps also possesses similar criteria regarding its colour on the basis of job profile.

3.) Protection From Natural Hazards

Full Brim Hats prevents the face from the scorching sun, eyes from rain and dust and ears and neck from sunlight.

Generally, the Cap style covers the forehead and half of one’s face from sunlight.

4.) Way Of Wearing

While wearing Full Brim Hats one should keep in mind that the brim should be facing forward.

When Caps style hard hat is worn, make sure that the suspension fits properly on the nape of the neck. It’s not at all cool wearing these caps with the hood facing backwards.

5.) Comfort Level

Full Brim Hats give high level of comfort due to its lightweight along with its superior retention and balance.

Hard Caps are generally stable, lightweight, adjustable with a secure fit.

6.) Protection From Injuries

Due to the full brim all around the hard hat, they give added protection to one’s head, face, ears and shoulders.

Hard Hat Caps are more like helmets with a hood in the front, securing one’s forehead and half of the face.

7.) Maintenance

The suspension of Full Brim Hats should be modified, avoid putting stickers on it and replace it immediately after being struck by a strong blow.

Hard Hat Caps should be cleaned regularly with warm water and mild soap rather than harsh detergent. Also avoid dropping, throwing or sitting on them.

Choosing the best according to our budget, is the primary intention of all. Whenever you think of a premium quality, heavy duty and comfortable work-boot, just look out for a pair of logger boot.

It is highly recommended for workers facing harsh outdoor conditions.

Logger boots are far better than other traditional work-boots available in market. Buy, before you blindly rely on my statement, I would like to suggest you to go through the detailed information placed below, regarding its features and benefits.

I am damn sure you will also have the same opinion as mine.

So!

Start scrolling down!

Logger boots are the most popular heavy duty work-boots in market because of its unique design, raised heels and consistent comfort level. These boots are for workers working in hazardous conditions, for linemen, logger industry workers, etc. Wearing logger boots is a more flexible and comfortable option. These boots provide additional safety and support to your feet. So, why go for something else?

8 Best Logger Boots For MenDefining Logger Boots:

These are a particular designed work-boots commonly used by loggers and also by people with other heavy professions. Logger boots define a sturdy and comfortable footwear for people who need to be on their feet for long hours while working. Properly constructed logger boots are used by people in back-country also.

A Quick Glance at the Features of Logger Boots

1.) These boots have a more-square toe than narrow for a rigid grip. They have a raised heel cap to stabilize the feet while climbing.

2.) These boots are normally 8 to 10 inches tall. Most often, the lace pattern in these boots are from lace-to-toe.

3.) Logger boots are made with double-welting, i.e. the boot is attached to the sole with double-layered stitching to make them strong and durable. This double-welting feature of logger boots make them waterproof and also prevents the footwear from getting cracks and crevices.

4.) These tough boots are capable of protecting your feet from all sides, against rolling logs, sudden shocks, slipping or tripping, heavy falls, etc. People working through brush, muck, types of undergrowth and climbing, need these boots.

5.) The raised heels in these boots are usually more than 2 inches in height. This heel evaluates your feet keeping the moisture out, while you are climbing or you are in a sloping area.

6.) These boots provide lace ankle support to your feet on uneven terrain and keeps them free from bugs, debris and moisture.

7.) Logger boots have aggressive lugs to provide traction and support to your feet in wet and marshy areas or uneven terrain.

8.) These boots have a fringed paneled leather called Kiltie which is attached just at the end of the laces. The Kiltie protects the boots from getting damaged by water, dirt, mud or debris, extending its lifespan.

9.) One of the main features of these logger boots is its steel shank which is a supportive piece between the outsole and the insole. This steel shank adds support and protection to the boots, making them comfortable and durable.

10.) Logger boots have extra reinforced toes which can resist up to 75 pounds of impact or compression. These boots are made up of waterproof materials which can prevent your feet from rain, fire, wind and snow keeping them dry and odor-free.

You may require Thermolite or Thinsulate insulations in your logger boots if you live in cold regions.

People Using Logger Boots:

Matching your boots as per your job requirements is very essential.

Logger boots are commonly used by-

Workers working in logging industries

Linesmen

Land Surveyors

Hunters

Trekkers

Bikers

And many other professionals.

Is An Alloy Toe the Same as Steel Toe? 

What is Steel Toe?

Steel toe has been a traditional form of choice for protective workwear. The hardened steel material used in these is pretty convincing for safety boots, especially for those involved in the wood industry. They form a reliable sort of protection which is the top thing one expects before buying a pair of safety shoes.

Steel toes are specially designed safety-toe protective footwear, wherein the front is designed with steel caps; this is to ensure protection to the wearer against any kind of injury. When added to low insulation footwear, the steel toe works on enhancing the insulation to an appreciable level.

What is Alloy Toe?

In recent times, people have started to switch their perspective from Steel to Alloy’s toe and it has gained quite a loyalty in the protective footwear industry. They are expected to be as strong as steel. However, certain differences make it a superior choice and worth considering over the traditional steel toe. The material and the components used in Alloy toe, and its construction differs fairly from what you get in the Steel ones. They are extremely lightweight, easy on your foot.

This is because they are made up of a combination of titanium, aluminum, and other lightweight materials. This is what makes alloy toes extremely friendly to wear. A worker can wear it all day long without feeling a thing. For temporary workers, inspection planting tours, having these safety boots will make sense , but considering they are a bit pricy over steel toe.

Pros & Cons of Steel & Alloy Toe:

STEEL: PROS

· The top-notch safety and hazard protection in the industrial and construction business.

· The wearer gets to experience the strongest, most possible protection available.

· Toe gets thinner than that of the composite ones, thus making it less bulky and thereby preferable boots.

· It is pretty affordable and goes well for even a tight budget.

STEEL: CONS

· Sometimes steel might act like cages on your feet and can be a bit irritating and itchy.

· Not recommended for an electrician as steel conducts electricity, therefore, can turn into a dangerous scenario.

· It is heavy as compared to that of the Alloy toes.

· You might feel a bit cold in the winter.

ALLOY: PROS

· Made up of extremely lightweight material providing a satisfactory experience to your foot.

· Ensures more comfortable wear and comes with an attractive design.

· Way too thinner than that of the steel toe.

· 50% lighter in weight as compared to the Steel toe.

· More room for the toe as it is pretty spacious.

ALLOY: CONS

· It is slightly expensive than that of the steel toe.

· Not very strong as compared to steel which makes it unfit for industrial work.

· Set off the metal detectors.

Is An Alloy Toe the Same as Steel Toe?

Is An Alloy Toe the Same as Steel Toe?

What is Steel Toe?

Steel toe has been a traditional form of choice for protective workwear. The hardened steel material used in these is pretty convincing for safety boots, especially for those involved in the wood industry. They form a reliable sort of protection which is the top thing one expects before buying a pair of safety shoes.

Steel toes are specially designed safety-toe protective footwear, wherein the front is designed with steel caps; this is to ensure protection to the wearer against any kind of injury. When added to low insulation footwear, the steel toe works on enhancing the insulation to an appreciable level.

What is Alloy Toe?

In recent times, people have started to switch their perspective from Steel to Alloy’s toe and it has gained quite a loyalty in the protective footwear industry. They are expected to be as strong as steel. However, certain differences make it a superior choice and worth considering over the traditional steel toe. The material and the components used in Alloy toe, and its construction differs fairly from what you get in the Steel ones. They are extremely lightweight, easy on your foot.

This is because they are made up of a combination of titanium, aluminum, and other lightweight materials. This is what makes alloy toes extremely friendly to wear. A worker can wear it all day long without feeling a thing. For temporary workers, inspection planting tours, having these safety boots will make sense , but considering they are a bit pricy over steel toe.

Pros & Cons of Steel & Alloy Toe:

STEEL: PROS

· The top-notch safety and hazard protection in the industrial and construction business.

· The wearer gets to experience the strongest, most possible protection available.

· Toe gets thinner than that of the composite ones, thus making it less bulky and thereby preferable boots.

· It is pretty affordable and goes well for even a tight budget.

STEEL: CONS

· Sometimes steel might act like cages on your feet and can be a bit irritating and itchy.

· Not recommended for an electrician as steel conducts electricity, therefore, can turn into a dangerous scenario.

· It is heavy as compared to that of the Alloy toes.

· You might feel a bit cold in the winter.

ALLOY: PROS

· Made up of extremely lightweight material providing a satisfactory experience to your foot.

· Ensures more comfortable wear and comes with an attractive design.

· Way too thinner than that of the steel toe.

· 50% lighter in weight as compared to the Steel toe.

· More room for the toe as it is pretty spacious.

ALLOY: CONS

· It is slightly expensive than that of the steel toe.

· Not very strong as compared to steel which makes it unfit for industrial work.

· Set off the metal detectors.

Is An Alloy Toe the Same as Steel Toe?

Now that we know the exact difference between a Steel toe and an Alloy toe, we know that they are not the same. Although the purpose of both is pretty the same- to protect the wearer. Both have their own advantages and disadvantages.

It totally depends upon the budget you can afford, the occupation you are dealing with, and your prevailing work conditions. For more hazardous and industrial work that involves falling of objects, and working with sharp objects, it is best to go for steel toes.

While working in a manufacturing industry, which requires lots of moving around, lifting and going here and there, and also more standing, a comfortable Alloy toe will be a better option. The thinner nature of Alloy makes it better for the wearer to walk, roam, work effortlessly while feeling nothing.

Remember, there is no comparison between the two as each has its own specialty and is favorable under certain conditions.

So, which one to choose?

Well, earlier, you might have been confused as to which one to choose. Now that you have come this far, you might have made a clear mind in deciding which is ideal. Here are a few points that can provide you sufficient clarity:

· Ask yourself, which type of risks are you exposed to at the workplace? If you are often exposed to a lot of danger of the falling of any object, equipment, or machinery’ undoubtedly, Steels will be your best pick.

· If you are the one who loses temper and kicks any object around, especially heavy objects, you will probably have a better choice with the steel undeniably.

· Are you the one that walks a lot, carry loads of object from one place to another and stand all the time? If so, you will require safety footwear that is more comfortable to your feet. A lightweight Alloy gives you a soothing, relaxed, and comfortable feel, so you can pick them. It will help you beat tiredness and won’t make you feel drained out at the end of the day due to constant walking.

· Based on the temperature in your workplace you can decide the type of toe to choose.

Conclusion:

Static Dissipative Shoes How They Work?

The rush of sudden electrical discharge can wreak havoc in sensitive environments. Industries involved in the electronic component or pharmaceuticals handling, processing, and manufacturing are prone to the constant risk of static current build-up.

This static electricity is problematic as it triggers shocks and causes considerable damage to equipment and people working in such scenarios. It is the reason why static dissipation is a compulsory safety feature in footwear for people working in industries where static current build-up is a prevalent issue.

Static dissipating safety shoes as the name suggest are designed to reduce the amount of static electricity that is built upon your body. In this category comes safety and non-safety shoes that protect workers against the possible danger of the static current build up in the workplace.

The SD safety shoes are meant to be worn in work areas where you come directly in contact with technical and electronic components such as computer technician jobs, electronic product and component manufacturing, laboratories, clean room environment, and firework manufacturing.

These environments require you to take safety and preventative measures in advance to mitigate the effect of the accumulation of static. These shoes are designed such that they prevent contact with the floor. Plus, control the vision of sparks of the static electricity that might cause serious damages.

How Does Static Electricity Works?

Static electricity definitely can be pretty risky and a lot more dangerous in work environments. It can damage electronic components, chips that you are about to assemble in the equipment. Moreover, it can affect your ability to build a component as there is a possibility of other complications too.

Static electricity is the electrical charge that is present and circulated on the surface and floors. It occurs due to the accumulation of charge in one place. Once the sole of your shoes and the floor surface gets in contact and later is separated, there is an electrical discharge that happens thereby leading to electric shocks.

The science of static electricity - Anuradha Bhagwat

You might remember that the time when you tried to scruff your feet and then touched the floor, and later when touched your feet again, you received a mild shock, that’s what static charge is that gets build up.  It seems to sound funny back then, but in a sensitive and serious working environment, this charge is not mild, instead, it’s way too dangerous to handle.

The only way to get rid of this charge and be safe is to ensure the surface and your footwear allow the electricity to seamlessly flow through it. As the electricity flows through the surface without any barrier, it reduces the chances of experiencing any kind of shock or spark. Thus, resulting in inculcating a healthier work environment.

Selecting the Right Shoes for the Job

One must carefully evaluate their job condition and working environment, before making any sort of judgment for buying a pair of SD shoes. There are different shoes based on different industries and types of work.

1.) Safety and health experts always instruct employees to wear the required shoes that offer protection. They might be a little awkward on the street but are ideally meant to act as protective gear during work time.

2.) Each industry has designed a safety protocol and shoes that go according to their workplace condition. For example, the heavy and dangerously sharp object needs shoes that are strong solid and doesn’t harm your leg even if anything falls on it.

3.) Places prone to electric shocks need static shoes that flow the electricity through our bodies. This intends to reduce the risk of the spark that causes explosion or fire. However, in such conditions, one must not wear nylon, cotton, silk, and wool material socks.

4.) SD shoes are capable to withstand electric shocks. They let the current flow through it which seems to be the best protection under all kinds of circumstances.

All You Need to Know About Static Dissipative Footwear

The danger of static buildup at the workplace can leave you in shock and a miserable situation which is the least you’d wish to expect.

Firstly, ask yourself whether you work in these two main environments that are prone to static electric charge: computer component handling workplace and plant and machinery facility, both create large static electricity in the manufacturing process.

These are the places that create static electricity which is harmful to employees working. As soon as the employee touches metal, it discharges current and the person gets unwanted shocks.  This can make the person uncomfortable and vulnerable to a serious health hazard.

Did you know everything about Static Dissipating Shoes

?

Static dissipating shoes come as a rescue in multiple work scenarios. They are helpful in but for that, the floors, mats as well machinery needs proper grounding to reduce the static electricity in the environment.

Multiple layers in static shoes allow the static build-up in the body of the person to pass seamlessly into the floor. This is the critically most important safety feature that must be used in the work shoes and people working under such industries.

Static dissipating shoes are a must-have safety norm in industries like hospitals, pharmaceuticals, explosive shells manufacturing, and firework manufacturing. There is no need to take a second chance or ignore safety as it is best to be prepared by wearing safety shoes.

“Most electric Shock occurs at Workplace”

Based on the research and survey conducted by the Australian health and welfare institute, it was stated that the most common place for people to experience shock and spark incidents is at the workplace.

During the year 2014-2016, about 1065 people were reported to be hospitalized due to electric shock at the workplace. This report was solely for one country, imagine the count of injuries around the world.

How Do Static Dissipative Shoes Help You

When you wear footwear with static dissipative feature –  

The electric charges flow through your body to the ground as soon as you come in contact and get separated from the floor.

The electricity doesn’t build up on your body which saves you against getting a shock or spark.

The chances of getting a shock are reduced to a bare minimum especially when you touch metal objects,  sensitive surfaces, or electronic equipment.

SD footwear will help you, but you must ensure to wear it in a clean environment only.

How to Care for ESD Footwear?

To make sure your footwear is working properly at its best, they must be frequently cleaned, maintained. A regular check needs to be provided to ensure safety is guaranteed every time you wear it.  

Wondering how to protect and take good care of your shoes, here is all you must follow rigorously.

The Steps:

1.) Use a mild soap to only scrub the outsole smoothly.

2.) Ensure that your shoes are clean and away from all sorts of dirt and debris, this adds to the longevity

3.) Once in a while, make sure to clean the interior of your shoes. Remove the insole and vacuum away the interior part thoroughly.

4.) The inside of the shoes should be kept clean and tidy always.

5.) Once the inside is thoroughly cleaned, the outer part needs to be wiped with a soft cloth.

Following these steps will surely help you maintain your shoes in proper condition. Furthermore, it will ensure that safety is maintained just the right way.

Are Employers Required To Pay For Steel Toe Boots? 

 Nothing around you comes free of cost.

Everything has its own price, be it a matchbox or an aeroplane.

Whenever you purchase any item from marketplace or online, you have to pay a certain amount of money for the same.

And it’s quite worthy because that purchased item is meant for your purpose.

But what if you require something related to your job profile!

Is your office or the employer liable to bear that particular expense of yours?

For e.g., if an industrial worker needs a PPE or Hard Hat or a pair of Steel Toe Boots, who is going to pay for his requirements?

The worker himself or the employer?

This issue is a big question for our readers out there.

Just imagine!

A daily waged worker who is unable to meet his basic needs properly, how is it possible for him to bear the expenses of his safety gears, necessary in his work-field!

Gradually, as you go over this article you will find all your answers.

So, keep scrolling!

Workers, never by any chance, are bound to bear the expenses of his steel toe boots or any other safety gears for his job purpose. It is the sole responsibility of the administrator or the employer to provide every safety measures to the employee, be it their work-boots or PPE or their safety glasses or head protection.

When workers are working in a factory on the basis of monthly salary, they are in action for the better production of the factory. And this increase in production level is ultimately beneficial for the employer and the owner.

Let’s make this more clear to you.

Rules Of OSHA

Just take a quick look at what OSHA has to say about this-

1.) The employer has to provide all the protective equipment like PPE, work-boots, safety eyewear, hard hats etc. to his employees and that too free of cost. The workers should also keep one thing in mind, not to wear these items when he is not at his jobsite.

2.) In case of metatarsal protection built-in work-boots, the employer cannot reimburse the worker for those shoes or boots.

3.) If an employee’s steel toe boots get lost or damaged, intentionally, then only he is bound to pay for the replacement. It is the user’s fault.

4.) In case, any employee prefers non-speciality safety toe footwear rather than the steel toed ones on their work-field, then the employer is not bound to pay for the worker’s boots, even if the workers wears them all-time.

5.) When an employer pays for the steel toe boots, he will definitely choose the right pair for his employees to avoid hazards at work-place.

6.) Moreover, he will be very much concerned about the usage and maintenance of the steel toe boots, resulting into higher protection of employees and fewer injuries and fatalities for them.

Sample Protective Footwear Policy

This policy got initiated from the 1st of July 2015.

It was the best way of that time to keep the workers informed about their safety footwear requirements along with the price.

The Policy Statement-

This policy was a clear message to the employers involving workers onsite.

If an employee (worker) needs special safety boots, the employer has to provide it by bearing the expense of the footwear.

If an employee doesn’t need the boots, then the employer has to defray some of the cost of the safety boots.

The company makes every possible protective gear available for the employees, to protect them from hazards.

This policy outlines the requirements for obtaining Company Reimbursement for safety boots.

It is the responsibility of the Management to first evaluate the various hazards and then provide the perfect safety gears to prevent those hazards.

The nature of the hazard is then noted down in the Company’s form in short, with the areas or job titles, after proper survey. The date of survey should also be mentioned in the form. Finally, the Supervisor signs the form.

The Management arranges an training camp for the employees to educate them about the proper and current usage, proper care and maintenance of safety equipment.

It is the Supervisor who maintains an acknowledgement record of the employees attending the training.

Requirements for obtaining safety footwear (steel toe boots)-

The employee should work in such an area on regular basis, where the safety boots are a must.

If the job profile of any employee requires the usage of steel toe boots regularly, he can easily obtain the footwear.

The Company-designated supplier supplies such safety work-boots.

The loss-control coordinator will decide what type of safety boots is required by the employees for that particular area or operation, like the boots can either be the steel toed ones or the metal-free shoes or metatarsal guards.

Eligibility for reimbursement of safety boot’s expense-

Both full-time and part-time employees working around hazards are eligible for these safety boots.

Limitation of the policy-

The amount of Company reimbursement for safety boots in a year will be decided by the loss-control coordinator.

The Company’s reimbursement will allow only 2 pairs of safety boots for each employee, every year. This reimbursement rule may vary as per case basis.

Replacement of safety boots is determined only after the return of the first pair to the loss-control coordinator.

The protective footwear must comply with the following standard of the ANSI Z41.

Responsibility of the employee-

Shop online at- https://workgearz.com/are-employers-required-to-pay-for-steel-toe-boots/

If there is any difference between the cost of the safety boots and reimbursement amount, then the employee shall bear it.

An employee should take proper care of his steel toe boots and maintain them.

7 Most Durable Jeans for Construction Work!  

Being in construction work means tackling tough conditions throughout the day!

For this, you definitely deserve clothing that is comfortable yet tough enough to withstand the harsh construction working conditions!

And amongst clothing, the very first thing that should be taken into consideration is the pair of pants. You can wear any work pants of your choice, but nothing can beat the durability and the toughness of jeans!

Yes, you read it right! Jeans are the best work pants for the construction workers that won’t wear and tear with the slightest scratches and pinch of tools.

That said, here in this article I bring to the 7 most durable jeans for construction work that you will love thoroughly and your colleagues are going to envy of.

My absolute favorite is the Wrangler Riggs Workwear Men’s Carpenter Jean that has all the features required in a construction jean like a large number of pockets for storing tools, comfortable, durable, and made of ripstop fabric.

So, let us first start with the requirements of a construction work jean:

Features Required in Jeans for Construction

Your construction jeans are not any simple jeans to display your fashion! It should be of tough built to withstand all the rough environments and still be durable. Following are the features that are must in your construction pair of jeans:

1.) It should be made of a comfortable fabric:

Speaking of comfort, what can be more comfortable than anything made of 100% cotton! So, for your all-day comfort at the workplace, your work jeans must be made of cotton or a blend of some other material in a small percentage with cotton.

2.) It should be durable:

Durability is ensured with the material and the stitch of the fabric. Twill fabric, triple stitched, and ripstop fabric should be your lookout in the construction jeans.

3.) It should have enough storage space:

Storage space for keeping the construction tools is ensured with a large number of deep pockets. Any jeans with at least 5 pockets should suffice as your construction jeans. The extra pockets must be at the back or in the right leg of the jeans.

4.) It should have hammer loops:

This is a very important feature in construction jeans because storing your hammers and pliers during construction works becomes essential.

5.) Durable closures:

The jeans should have durable closures in the form of heavy duty brass zippers, brass buttons and eye closures.

6.) It should also have belt loops:

Though a very common feature in almost all the jeans, yet an essential one especially for the construction jeans which ensures tight waist grip while you are working.

7.) It should be made of a flexible built:

Flexibility depends on the material, fit and stretch of the jeans. Regular fit jeans or stretch fit jeans that allow free movement of the thighs and knees should be the preference.

Are Hiking Boots Good for Work?

Are you one of those who like to wear the same pair of boots everywhere? While some people want to have a different pair of shoes for every occasion, a lot many people can’t afford to do the same. And even if those people are financially stable, they prefer wearing the same boots everywhere because they are generally too tired to get used to different boots again and again. These people have generally one question in their mind: can hiking boots be used as work boots?

Yes, you can use hiking boots as work boots. I think hiking boots are extremely versatile and in fact,  can turn out to be a  great option if you are really looking for a comfortable pair to wear at work. Hiking boots are perfect amalgamation of comfort and toughness and can sustain almost all weather conditions. These are durable, waterproof and offer great support.

However, there are some basic differences that need to be kept in mind while comparing hiking boots and work boots. In this article, I will break down these differences and will discuss the factors on which the functioning of the hiking boot depends and how they can turn out to be a blessing in a hard day’s labour.

Difference between Hiking boots and Work boots

Here are few key differences between the two styles which you surely don’t want to miss

Hiking Boots

Hiking boots, as we all know are designed to conquer everything from moderate to harsh that nature throws at them. Waterproofing is a key feature since the sole purpose of these boots is to save your feet since you will be trekking in nature. Therefore hiking boots are mostly waterproof and can face all types of water conditions.

Next comes the inner sole of hiking boots which should be of top quality in order to make the boots more comfortable for you so that you can cover distances in a blink. I think EVA is the most common and fine option in these boots. The EVA inner sole not only molds to the shape of your feet but also ensures a different level of solace especially if you are suffering from pronation and supination.

Another important aspect that you need to focus on is the outer sole. Hiking boots that have durable lug outer sole and decent grip patterns promise to be with you a little longer than your normal work boots and saves you from slipping on slippery surfaces. In short, you don’t have to worry about the things that nature throws at you.

Lastly, in order to keep your feet dry and crispy, you will need some ventilation and inner lining plays a major role in this. Gore-Tex is one of the best options which ensures that your feet remain toasty even when you drench them in water.

Work Boots

While work boots vary significantly from work to work, there are two things that are common in all which is comfort and safety in the workplace.

Since work boots are constructed for hazardous areas, you can find features like the presence of a safety toe designed from composite materials, alloys or steel depending on your needs. And this particular feature is absent in hiking boots.

The outer sole of the work boots is mostly resistant to electrical surges and hazards and are quite versatile. That is why they can be used as multiple places and for more job types giving you more value for your money.

Unlike hiking boots which are mostly waterproof, work boots are designed to be water resistant and not really waterproof which comes as an advantage in case of hiking boots. Although boots which are designed for people working in the logger industry are somewhat waterproof but unfortunately, they don’t have proper ventilation.

For your ease of understanding I have mentioned these differences according to their features.

FeaturesWork BootsHiking Boots

Weight Due to increased hazards of a construction site, presence of steel toe often adds significant weight.To avoid trips and abrasions, toe caps or bumper made of material like rubber are present which make the boots lightweight.

Flexibility Rigid in comparison to hiking boots.More flexible to avoid hindrance.

Traction Rubber outsoles with deep indentations to avoid slippage.Lug soles which includes grooves to increase stability.

Pros and Cons of wearing Hiking boots to work

Pros

We all know that hiking boots are exclusively designed to make your hiking experience much better but they are even great when you wear them at work. Getting confused? Well, let me help you by telling you some of the benefits of wearing hiking boots:

1.) Support and Stiffness: Hiking boots gives you just the right amount of support and stiffness you require to function well. The stiffer midsole and better ankle coverage in comparison to normal work boots allow you to carry out tough and hefty activities without hurting your feet. These are generally lightweight which makes them relatively comfortable and help avoiding sprains.

2.) Outer Soles: Almost every work demands a specific amount of tread to be present in the boots. The tread of the hiking boots permits them to form a steady grip on uneven surfaces. This way, these boots prevent slippage on slippery surfaces and accidents.

3.) Meant for watery surfaces: Since hiking boots are designed for hiking purposes where you are generally exposed to many things including water, these are generally waterproof. While your regular boots might remain wet, these boots are designed to dry quickly even when you walk through streams and mud. That is why hiking boots are suitable almost for all kinds of work that include even slightest of outdoor activity.

4.) Durability: You can’t ignore the fact that hiking boots are designed keeping hiking terrains in mind. When compared to normal work boots, these last longer. While with other boots, you have to replace them after every few months, hiking boots can last for years with some proper care.

5.) Better Foot Support: Hiking boots have stiff soles and great torsional rigidity which means you have a solid platform to step on. No matter how tough the environment is, your foot is safe from getting twisted.

Cons

1.) Poor Breathability: Hiking boots are made of thicker materials like leather that don’t breathe well. Another reason that could be responsible for less breathability is the presence of high tops through which heat and moisture can’t easily vent through. This not only makes your feet uncomfortable but also increases the chances of blisters.

2.) Hiking boots take time to break in: Hiking boots are designed using stiffer material that takes time to soften up. Because of this it sometimes becomes really intolerable to wear these boots at work.

3.) Your feet can get hot: Since hiking boots are less breathable, they tend to trap heat. This is bearable in cold weather but it is not so great in hot weather because it makes your feet sweat more which can increase the chances of developing blisters and other foot problems. If you are working in a hot environment then you’ll have to stop periodically and let your feet dry out and cool off which is really annoying.

Do hiking boots meet OSHA footwear guidelines for work?

If you are unaware about what exactly OSHA standards then let me tell you that these standards are generally available in footwears that are protective in nature and save workers from the risk of injury from impacts, punctures or electrical hazards at the job site. These generally impact and compression resistant as certified by the American Society for Testing and Material Standards.

However, when we particularly talk about hiking boots, these boots are not OSHA approved as they do not comply with ASTM standards for protective shoe performance and testing methods. But that does not stop them from being any less protective in nature. Although, if you are wearing hiking boots at work you should be a little more focused towards safety in comparison to your regular work boots.

Best Hiking Boots for Work

My top three choices for hiking boots are as follows

1.) Columbia Men’s Newton Ridge Plus Waterproof hiking boots

If you are looking for boots that are built to deliver the best in terms of style, performance and versatility then these Ridge plus are meant for you. Made exclusively from fine leather, the boots feature Omni-tech waterproof technology that allows them to fight unfavorable weather and prevent it from affecting your feet.

Technically, the outsole is made of rubber which is responsive, supportive and super grippy so that you can stand firmly at the worksite. The shaft measures approximately 5” from the arch and the heel measures approx 1.5” with the platform measuring approximately 0.50”.

Not just this, the boots are infused with advanced technologies which make them lightweight. Moreover, the durable midsole promises to offer long lasting comfort, superior cushioning and high energy return. The advanced traction rubber sole allows you to have a slip free movement on rough grounds.

The boots have durable mesh tongue for breathability with waterproof full grain leather and features a lace up closure for an adjustable, secure fit.

Are Doc Martens Work Boots Good?

Since the 1960s and is still one of the most preferred brands in the market. Designed literally by a German doctor during the time of the Second World War, Docs have been growing so fast that the brand was named as the eighth fastest growing British company in 2012.

According to the famous Business Insider, almost 10 million pairs of Dr. Martens are made each year but could this be the brand of your choice?

My answer would definitely be a YES! These boots are perfect for almost any kind of work whether it’s a warehouse job, an office job or an outdoor job. Docs are comfy yet cool. The cushioned soles in them are tough enough to save your day. From giving you a snug fit to a mind blowing durability, these boots are worthy of being a good pair of work boots.

However, there are other factors that make Docs capable to be your favorite work boots. What are they? Let’s have a look!

What are the Different Types of Doc Martens Boots?

Doc Martens manufactures a variety of work boots that includes work boots for men, women and work safety shoes. I have classified these boots according to their specific areas like exquisite features and technologies.

Doc Martens Boots Classification by Features

With one of its kind features, Doc Martens gives you enough varieties to browse from. Just choose from their work boots by aligning the specific features to your particular need.

1.) Anti Static Work Boots

These conductive safety boots will save your feet by sending the electrical charges directly to the ground and thus prevent electrocution, spark or a static shock. These boots are well suited if you are dealing with electricity on a daily basis.

2.) Non-Metallic Toe (NMT)

These are nothing but composite toe boots which will protect your feet from extreme weather conditions. What’s really interesting about these boots is that they can pass through a metal detector and are best for people who work in harsh conditions.

3.) Safety Plate Boots

These are the steel toe variant of Doc Martens and are known for providing a protective reinforcement in the toe area. The boots can actually save your feet from falling objects and compression.

4.) Slip Resistant Boots

You can easily guess what’s special about this boot from the name itself. Designed with rubber soles and tread patterns these boots can increase the traction which can indeed save you from slipping. Other than rubber, the materials used in manufacturing are PVC and PU which make them perfect slip-resistant boots. The boots are suitable for people who work in an oily or slippery working environment.

Doc Martens Technologies

The two unique technologies that you will definitely find in these boots are:

1.) SoftWair

This particular technology is the reason that makes Martens lightweight and comfortable. Not just this, by eliminating the feeling of a heavy boot, SoftWair engineering allows your feet to breathe easily in the workplace with the help of air cushioned sole. And yes, the boots will also save your feet while you work in grating conditions.

2.) Grip-Trax

Interestingly, this is the first tech to be developed by Dr. Martens which is the perfect amalgamation of durability, slip resistance and comfort. The enhanced flex and cushioning of these boots make the worker feel safe and protected.

Why Should You Choose Dr. Martens?

From comfort to durability, I have got a number of reasons to convince you that these boots are just the right choice for work wear.

1.) The Docs are made to last with their hard leather. These boots can sustain almost every kind of wear and tear without cracking or splitting. Thanks, to the tough lining and stitching that saves the boot from rotting or bursting.

2.) Give extra protection to your feet with Docs when you are at your job. The steel toe area of the boots safeguards your metatarsal area against stumbling. Whatever work you do, these boots promise to protect your feet from almost every kind of element whether it’s water, snow or mud.

3.) The most important factor to be kept in mind while purchasing any work boot is comfort and trust me Doc Martens consider comfort a basic need rather than a choice. Wear them for sometime and you will realize that these are the coziest shoes you can ever wear. The soft inner lining keeps your skin protected saving you from all those irritating blisters.

4.) These have got good arch support and can accommodate different types of arches. The presence of an air-cushioned sole which is bouncy and flexible makes the boots very appropriate even for people with very low arch.

5.) Sometimes boots feel too restrictive but with Doc Martens you get what you need. The slip on boots are very accommodative and are quite easy to pull on and pull off.

6.) The functionality of Doc Martens is just great. The basic, no-nonsense style of these boots is quite impressive for the long term. Trust me, these boots make a statement of their own.

Which Dr Martens should you Buy?

Doc Martens come in different styles. Here are my top three choices

1.) Doc Martens Ironbridge Heavy Industry Boots

Dr. Martens – Men’s Ironbridge Heavy Industry Boots

Rich, water resistant tumbled leather uppers

Slip resistant sole reduces the risk of slips and falls on hazardous surfaces

Welted construction foot bed offers exceptional stability and durability

Protects against accidental contact with an electric charge

$129.95 Buy on Amazon

Prices pulled from the Amazon Product Advertising API on: 10/18/2020 8:59 AM

This Ironbridge boot is a legendary model from this brand. Coming with a 8-tie, lace- to- toe work style these rugged, soft toe boots are specially manufactured for people in the service industry. The lightweightness, comfort and slip resistance make the boot suitable for a general work environment.

If we talk about the design, the heavy industry boots are available in mainly black and dark brown variants which make them blend in any type of work environment. The boots are made of oiled and tumbled leather which is 100% water resistant. The presence of SmartMask feature in its sole gives you antibacterial protection.

Moreover, if you are looking out for comfort then the padded boot’s collar and tongue are always ready to save your day. The boots have inbuilt PVC air-cushioned sole which is resistant to oil, fat, petrol and alkali so that when you walk on hazardous surfaces there is no danger of slips and falls. The boots can also save you when you accidentally come in contact with an electric charge. You can also expect exceptional stability and durability from these tough yet gentle boots.

Pros:

Oil tumbled leather

Durable construction

Exceptionally stable

PVC air-cushioned sole with moisture wicking lining.

Cons:

Break in period takes longer than usual.

A person working at factories or a construction site pays the most amount of attention to investing in a pair of solid work boots. While that is a good practice, you often tend to neglect the significance of wearing a reliable pair of socks, which is just as important as work boots. Especially because for such workers, standing and being active on foot comes with the territory.

I am here to help you understand the advantages, and disadvantages of wearing good socks, plus a list of recommended socks to consider.

A Quick Summary of Top Work Socks

SL No.ProductProsCons1Carhartt Men’s Force Performance Crew Work Socks

Made of polyester & spandex

Durable and breathable

Fast dry and moisture-wicking technology

Heel & toe area have extra padding

Provides arch support

Tight around the calves

2Dickies Men’s Dri-Tech Moisture Wicking Crew Work Socks

Made of cotton, polyester, spandex, & nylon

Highly durable and long-lasting

Breathable due to ventilation channels

Uses Dri-Tech technology

Heel & toe area have extra padding

Provides arch support

Affordable

The length of the socks is a drawback

3Fruit Of The Loom Men’s Heavy Duty

Made of cotton, polyester, & lycra spandex

Weather friendly

Durable and breathable

Wicks away moisture

Superior quality elastic

True to its size

The entire sole has extra padding

Some may find it thin

4Smartwool Men’s Ultra-Light Wool Crew Work Socks

Made of wool

Breathable due to mesh zones

Dries moisture and keeps feet dry

Perfect for cold weather

The complete sole of the socks is cushioned

Premium quality wool

Thin enough to be worn in summers

Thick calved people will find them bothersome

5Hanes Men’s Tube Over The Calf Work Socks

A trusted brand for years

Very affordable

Made of cotton, polyester, & spandex

Very breathable

Premium quality elastic

Gives complete coverage from the toes to the calves

Thick cushions covering the sole

Flat toe seams reduce fatigue

Regular wash thins out the socks

Advantages of wearing the right kind of socks for construction workers

1.) When your work requires you to stand or walk all through the day for 9-10 hours, you need to make sure your footwear is appropriate. Along with it, you should be wearing comfortable socks. They add an extra layer of cushion to our feet. Being comfortable in a demanding workplace is necessary to be productive and drive results.

2.) Wearing the right kind of socks also aid as an added layer of protection from accidents caused at construction sites.

3.) Socks are a good way to wick away moisture caused by sweaty feet in work boots all day. Such jobs can sometimes be outdoors too, which means working in the scorching heat sometimes, or even factories can get hot with all the machinery around. Sweaty feet can lead to several issues of bad odor or even sores. Hence, for better foot hygiene, it is good to wear the right pair of socks.

4.) A good fitting pair of socks look great and smart as well. Work boots can be made to fit better with proper socks.

Tips on finding the right socks for construction workers

Now that you know the advantages of wearing appropriate socks while working in construction, you should also understand what you should look for while buying one.

1.) When buying socks for work, make sure they fit you well. The socks should not be a size larger or smaller, they should have a snug fit from your toes to your heel. Since work boots are generally ankle length or sometimes slightly higher, it is wise to buy socks that are long enough to cover till your mid-calf.

2.) The material of socks plays a big role in preventing any discomfort while at work. Pick a fabric based on the kind of weather you are exposed to at all times. If you are someone who sweats profusely, you should consider staying away from cotton socks. While they do soak up moisture or sweat quickly, they take longer to dry, leaving you feeling uncomfortable in damp socks throughout the day. Instead, you should go for materials like spandex, nylon, lycra, and mix of cotton and any of the others. They will keep your feet dry and healthy.

3.) At the end of the day, being comfortable while working is of utmost importance. Hence, you should buy socks that provide maximum comfort. Some socks are even padded for specific job requirements. Some socks are designed to give more arch support. Look for those particular features that would suit your needs while at work.

4.) The socks should be of breathable fabric to keep your feet dry and clean. They should, however, be able to keep your feet warm in cold weather conditions. Wearing breathable socks will help keep your feet odor-free.

5.) It can be quite frustrating having to buy new socks every few weeks due to wear and tear. Hence, it is viable to invest in a durable pair.

6.) Superior quality socks can be expensive, even so, you should not compromise on the quality. Check what your budget allows as many brands in the market will fit your requirement.

Read more..