9jabizz Online Power Tools in Nigeria

A guide to buying launch alignment equipment

It is very important to buy launch alignment machine to set the car wheel alignments in car repair factory. Car wheel alignment machine is equipment used for measuring tracking gap of wheel hub and axle under vehicle. It is a black and white machine that is used in tire shop to check the inner fender of the vehicle and it has four supporting legs that are made up of metal. These machines are used to get the perfect alignment on both sides of the vehicles at equal distance in order to provide better balance while driving. The alignments of wheels will influence the speed of your vehicle as well as fuel. It will also help you have better control on your ride quality by preventing shaking or vibrations. These machines are available not only in local general store but they can also be found online stores like www.9jabiz.com because there are many dealers who deal with quality products and can be shipped internationally as well. So keep in mind that when you go to buy this piece from seller; you should go with a reputed one who could give you warranty on their products and gives services if you find any difficulty after purchasing this product from them. These machines come with lot more features which makes them advance than other ordinary models that are available in the market.

Features and Benefits of a launch alignment machine

Launch Alignment Machine is a high-tech machine for alignment; it is equipment for repairing and maintaining the vehicle with high technology. This machine is specially designed for maintenance and repair of vehicles, this machine is used to maintain the car wheel alignment.

Launch X-861 3D Wheel Aligner Features

1. 3D measurement technology – more accurate and more stable

2. Specialized Camera System

3. Equipped with the targets without electronic elements

4. Calibration is not required

5.  Easy to operate by using User-friendly software interfaces

6. Smart measurement with fully Automatic Tracking and Moving Functions

The number of degrees of wheel alignment adjustment range of wheel alignment machine is 360 degrees. It can also adjust camber angle range 10 degree~15 degree, front toe angle 0 degree~+15 degree and rear toe angle 0 degree~+15 degree; The accuracy of wheel alignment machine  is ±1mm, whose accuracy is higher than that of traditional wheel alignment.

The Launch Alignment Machine is equipped with a sensor that detects the exact readings of vehicle wheels and displays it on LCD screen in front of the machine. This feature allows the user to view the readings clearly without any errors. The measurement values are displayed in both metric and imperial units for additional convenience.

You might be wondering, “How to buy air compressor in Nigeria?” Well, with 9jabizz, you can search and compare more than 50 air compressor dealers across Nigeria. We aggregate product prices from different vendors and help you buy best deals in any Nigerian location. Our unique and smart technology compares prices of same products across different stores to help you get the cheapest one possible.

Air compressors are the most important part of a tire-changing and wheel service kit. Before tires, these were the only means of air delivery to cars and other vehicles. The air compressor can be used for filling up tires, airing up balls, inflating mattresses and much more. Air compressors are very useful in our day to day life. Here we have listed some best to buy air compressor available in Nigeria.

Air compressors come in a variety of sizes ranging from one horsepower to three horsepower which is a good option for you to use based on your vehicle type and your needs. Air compressors are also available for home use as well as commercial use. It's not difficult to find one that will suit your business.

We have the following options for you:

1) Airmaster Ultra Quiet Air Compressor (2hp)

2) Airmax 1 HP Ultra Quiet Air Compressor(Black/Red)

3) 10 HP 2 Stage Air Compressor with Side Access Panel & Steel Wheels

4) V-Twin 2HP Single Stage Oil Lubricated Air Compressor (Black)*

5) Ingersoll Rand 2HP Portable Two Stage Oil Lubricated Air Compressor*

6) 15HP 4 Stage Industrial Heavy Duty High

Buy Air Compressors come in several different types and sizes. The type you need depends on your specific needs. Here are some of the most common types:

Portable Air Compressors: Portable air compressors are lightweight and can be moved from place to place, such as a garage to a job site. They're ideal for small jobs like inflating an air mattress or bicycle tire.

Truck Mounted Air Compressors: Truck mounted air compressors use larger tires and a truck-like frame to carry the weight of the machine. These machines are very heavy duty and used for heavy industrial jobs, such as construction site work. They can also be more expensive than portable units due to their heftier size.

Air Compressor Accessories: When purchasing an air compressor, it's important to consider accessories that will make your unit more useful. For instance, you may want an air hose reel so that you can store the hose neatly when not in use. You might also need a tire gauge to ensure that your tires are properly filled, or a connection for a pressure washer for cleaning purposes. When considering accessories, think about how you'll use your compressor to find out what you really need.

As an essential part of any machine tool, the air compressor is a device that produces a continuous flow of compressed air to power tools. It converts the kinetic energy in gas or liquid into potential energy in pressurized air through piston-type engines. There are two types of air compressors: air plants and portable air compressors. Air plants, also known as central plants, provide compressed-air services to several facilities within a manufacturing plant. Portable air compressors are attached to the machine tools when used at job sites outside of the factory floor.

If you are looking for safety equipment dealers in Lagos you've found the right place! We at Safety Equipment Nigeria provide safety equipment and safety supplies across Nigeria. We specialize in manufacturing and supplying fall protection equipment, first aid kits, personal protective equipment and work wear.

Choose Quality Equipment

Industrial supplies and safety equipment dealers in Lagos will help you get the job done. Industrial suppliers are essential for companies that need to keep their machinery up and running on a daily basis. For example, if your company produces electricity, then the machinery may overwork or break down if the parts are not well maintained. That’s why it’s important to hire industrial equipment dealers that supply you with everything you need to keep your machinery in top condition.

Get Safe Workplace Solutions

Industrial supplies and safety equipment are an investment that every organization makes. From workers to contractors, each individual in an office has personal safety gear to keep them protected. Whether it is a simple pair of safety glasses or a complete set of PPEs, industrial supplies stores in Lagos supply such items to both large and small businesses. They also provide a wide range of safety equipment for industries like construction, engineering, manufacturing among others. Industrial supplies stores are actually where contractors go for all things related to industrial equipment.

The different kinds of industrial supplies

Lagos is the commercial center of Nigeria, just like New York City is the financial capital of the United States. Lagos offers some of the best industrial supplies, automotive supplies and safety equipment dealers in Nigeria.

Industrial supplies are used to help run a manufacturing plant. The industrial supplies are then sold to various manufacturing companies within a country or worldwide. These industrial supplies include but are not limited to chemicals, gases, liquids, electronics and raw materials. Industrial products are necessary for running a manufacturing business without these products the manufacturing process may be stopped.

Safety equipment dealers in Lagos protect workers from accidents and harm in work places and other places where there is danger. They sell safety equipment such as fire extinguishers, safety helmets, safety goggles, safety shoes and uniforms.

Chemicals dealers in Lagos take raw materials and convert them into chemicals that can be used in everyday products such as soap cleaning products etc.

Electronics dealers in Lagos sell electronic parts that can be used for building radios, TVs and computers among other electronics devices such as mobile phones etc.

Raw material dealers in Lagos buy raw materials from different regions of the world so they can resell them to manufacturing companies in their local market.

Selecting the right supplier

There are many of companies that can meet your industrial supply needs in Lagos. Scroll through the list of 9jabizz website dealers below to see if they can offer what you need.

Getting the best price

Buying spare parts of car on the internet is becoming more and more popular. There are not only many cheap offers, but also many reputable dealers. But how do you recognize a reputable dealer?

Many changes or repairs to your own vehicle can be done on your own. The internet as a shopping resource is enjoying increasing popularity, not just in terms of tires and spare parts of car. The Internet is in no way inferior to brick and mortar stores in terms of convenience and price transparency.

Even if a lot of money can be saved on the internet, supposed super offers can always be enjoyed with a little caution. In addition, the quality differences are sometimes very large. In this article, we'll tell you what to look for when buying tires or spare parts of car online.

Spare parts of car - what is the difference between original, replica or identical parts?

A fundamental distinction is made between auto parts and genuine parts or identical parts. The latter are often referred to as replica parts. In terms of quality, original parts from the manufacturer are of the highest quality. They are the same parts as the original equipment. Likewise, genuine parts are of course the most expensive. Connected to the brand dealer, they are a little less easy to buy on the Internet.

As an alternative to original parts, so-called ident parts are offered. The replicas are by no means equivalent spare parts. You should take a good look at the safety-relevant components such as brake discs or brake pads before purchasing them. You should refuse the cheapest offer and we recommend that you inform yourself about the manufacturer and its reviews.

When purchasing identical parts, it is also possible that the service life does not correspond to that of original parts. The price advantage can shrink quickly.

Spare parts of car- How to Find a Reputable Dealer

In the spare parts of car trade there are of course also black sheep. Their offer is not only highly questionable, but can also have serious consequences if in doubt. These certificates can be recognized very quickly by certificates and evaluations.

Reputable spare parts of car stores, on the other hand, are characterized by transparent information and a clear price structure. As a positive feature, the presence of imprint, contact options, general terms and conditions and instructions for withdrawal on the website must also be assessed. Established and reliable retailers often convince with a very large selection of popular brands. The delivery time is completed within a few days.

Spare parts of car online in Nigeria

Buy suitable spare parts of car? At 9jabizz Nigeria you are in the right place. Here you will find exactly the parts that belong on your car; whether you are looking for technical wearing parts, car accessories or  car parts  for styling and tuning your vehicle. View our extensive suppliers now and order car parts easily online!

What are you dealing with Buying Spare parts of car on the internet watch out for?

Once you have found a reputable supplier, the search for the desired car part can begin. Professional retailers offer very useful search functions for this. Laypersons can quickly find the right spare part. By entering TSN or HSN and the year of manufacture of your car, you will find it even faster. Entering the OE number also provides very accurate results when searching for professional suppliers.

The selection of common wear parts is often very large. Compare different offers on their quality features and their ratings. You may only purchase safety-critical parts as original or high-quality identity parts, for example from Bosch, ATE or Knorr.

How do you ensure that machines and power tools in Nigeria last as long as possible? We have listed the most important tips. Go for the maximum lifespan of your tools!

Use the machine for its intended purpose

If you use the machine according to the manufacturer's instructions, it will last longer. The machine is more likely to break due to incorrect use. If you use your power tools intensively, let the machine run without load every now and then. Then the motor can be cooled thermally. This prevents the engine from burning out.

Charge batteries properly

A battery with an hourly charger does not charge properly when it is warm. This type of battery needs to cool down before you put it in the charger. The more often you put a warm battery in the charger, the faster the battery deteriorates. This comes at the expense of power. This problem does not occur with batteries with a fast charger. These are automatically cooled by the cooling system in the fast charger. With lithium-ion (li-ion) batteries, the ambient temperature is a concern. Some batteries do not work in frost. Then the battery must first come to room temperature. Also, many batteries cannot withstand high temperatures (above 50 degrees).

Have your machine inspected

Have your machines inspected by an expert inspector at least once a year. Then you can rest assured that you are working with safe tools. How often you have to have machines inspected depends on the load on the machine.

Cleaning and transporting tools

Clean your machine after use. Transport machines with associated parts in a box or case. This prevents damage during transport.

Tips for chisels and hammer drills

Use a sharp chisel on hammers and hammers. Replace the chisel on the chisel and hammer drills if it becomes dull. Make sure that the drill chuck of the rotary hammer is always a lick has fat. Because the chisel moves back and forth in the holder, wear occurs. Grease slows down wear.

5 tips for power tool maintenance

Tip #1: Clean after use

Get used to cleaning your power tools in Nigeria immediately after use to remove dirt and dust. Do not use soap and water for this; a toothbrush and a soft cloth are often sufficient.

Tip #2: Storing power tools

Many types of power tools are prone to rusting. Fortunately, it is possible to prevent this to a great extent by storing the tool in a dry and well-ventilated place. 

Tip #3: Keep moving parts smooth

A drop of oil works wonders for the moving parts of power tools in Nigeria. This keeps everything running smoothly. In addition, take a look at the owner's manual for important tips for the correct use of machines.

Tip #4: Keep tools sharp

Do you notice that a job takes more time because the cutting edge is blunt? Tools work best when they are sharp. This is especially important for saw blades and certain types of drills for optimum cutting quality.

Tip #5: Replacing parts

A broken part? Or a part that has worn out over time? Don't delay repairs and make them right away to avoid bigger problems.

Want to know more about power tools?

There is now an electrical tools and equipment for performing almost every job. Most devices look simple at first, making it seem that everyone can get started right away. However, it remains risky, because they remain dangerous tools. After all, many accidents happen due to unwise use of the operator or the power tools in nigeria is used for something for which it is not intended. 

What about electricity voltage?  

Do you work with electricity? Then you must be alert at all times, it is possible that you will receive an electric shock. Once you receive a shock, the muscles contract very quickly and forcefully. A cardiac arrest can then possibly be the result of a shock.

Did you know that a tension can be deadly from: 

AC voltage: 50 Volts; 

DC voltage: 120 Volt. 

AC voltage: 

At alternating voltage, electrons travel from the positive pole to the negative pole and vice versa. So the current changes direction constantly. The amount per second is called the frequency. In Europe, the current changes direction fifty times per second, so the frequency is 50 Hertz. The nigerian energy network is based on alternating voltage and a socket therefore works on the basis of alternating voltage.  

DC voltage: 

At DC voltage, electrons only travel from the plus pole to the minus pole; the current, in fact, always flows in the same direction. Most electrical appliances and installations work on a DC voltage, but sockets work on AC voltage. This is not a problem, because converting AC voltage to DC voltage is relatively simple. This is usually done using a device battery or adapter. 

Lower voltages are certainly no less dangerous. This can also generate a lot of heat, which can cause nasty burns. Moreover, a fall usually follows a not so severe electric shock, because the victim flinches backwards.   

What should you pay attention to when using electrical tools and equipment? 

Before you can start working with electrical tools and equipment, it is recommended to read the user manual carefully. 

Be sure to wear clothes that cannot be caught by the moving parts while performing; 

Do not wear chains or similar jewelry while working. Also make sure that any beard or long hair is tied up; 

Never hold the part to be machined with your hands, but clamp it with a tool. 

Let electrical appliances turn off by themselves at all times. Never slow it down with your hands; 

Do not pull the tool towards you by the cord or air hose. After all, there is always a chance that  the ''on and off'' button will be hit and the tool ''start''. 

Consider hearing protection during work. Many electrical appliances produce so much noise that hearing protection is necessary. 

Inspection of electrical tools and equipment

For certain power tools in nigeria, written safety instructions must be received regarding their safe use, inspection, maintenance and dangers. These instructions must be drawn up in the English language and in comprehensible text. 

It is important that you work with only approved electrical tools and equipment at all times! 

Below you will find a number of tips regarding the inspection of (hand) tools: 

Before you start work, check whether the inspection sticker is present and falls within the period for re-inspection; 

Electrical (hand) tools must be inspected at least once a year by an authorized person; 

Never repair damage to the devices yourself. 

Monday morning at its best. You have had a relaxed extended weekend at home and are looking forward to the new working week in good spirits. You quickly take a bite of your breakfast on-the-go and settle down in the car. Brrr, better have some freshness. Key in the ignition, car heating on maximum and off you go. Alone, the engine sputters as duty calls. And then comes the verdict: a flat battery. You literally have nowhere to go…  Sound familiar? In this blog article we give you more insight into how your battery works how to buy car battery and how you can avoid battery problems.

What is a car battery for?

A battery or battery is a crucial spare part of car and has multiple functions. The main task is to keep the engine spinning during start-up. The battery creates a current peak and sets the motor in motion. In addition, a battery also controls the proper functioning of some car accessories and detectors. Just think of the radio, ABS system and start-stop technology. 

When should you buy a new car battery?

A car battery does not last forever. Count on an average lifespan of five years. After that, she urgently needs to be replaced. However, there are factors that can affect the performance of a battery. If a new battery is placed in your car right away, it will last longer than one that is first stored for a while. Extreme temperatures also play an important role. At low temperatures, a battery will solidify and lose capacity. If the mercury rises seriously, a battery can overheat again. And that can be fatal.

Avoid an empty battery

How can you prevent a flat battery? A battery does not require specific maintenance, so you should not look for the answer to your question there. You can outsmart an empty battery with the tips below.

 Do you want to start the car? Then first switch off all unnecessary power consumers before turning the key. Save battery by turning off the lights, turning off the heating and silencing the radio. Small efforts that immediately make a world of difference.

Disconnect when starting your car

When all energy consumers are switched off, you can try to start the car. If you have a manual transmission, depress the clutch pedal and shift the transmission into neutral. This way the motor experiences as little resistance as possible. No success? Keep calm and make short attempts to start so as not to exhaust the battery completely.

Time for a battery check!

Rotary hammers and combination hammers are used for drilling in hard rock types and for drilling in concrete. The hammer function of rotary and combination hammers is many times stronger than with an impact drill. Below are some tips to buy rotary hammer drill or combination hammer.

 Difference hammer drill and combination hammer

The difference between a rotary hammer drill and a combination hammer is that a combination hammer has a rotation stop and a rotary hammer does not. The advantage of a rotation stop is that if you place a chisel on it, the combination hammer can also be used for light breaking work. For example, you can chisel tiles off your wall.

Striking power

The impact force of a rotary hammer drill or combination hammer is expressed in 9jabizz website power tools in nigeria. The more Joule, the more powerful the drill. With a powerful drill, you can drill large holes and drill quickly. For the smaller drilling job, for holes from 5 to 22 millimeters in concrete, you need a drill or combination hammer with an impact force of up to 3 J. For the larger jobs, for holes in concrete larger than 22 millimeters, you need a drill - or combination hammer with an impact force of more than 3 J.

Cord or battery

Most rotary hammer drill and combination hammers have a cord, but they are also available on a battery. With a battery-powered drill or combination hammer, you won't be bothered by cords that get in the way or get tangled, and you have more freedom of movement. However, battery-powered rotary and combination hammers are a lot more expensive.

Other features

There are also other properties with rotary hammer drill and combination  hammers that can be important when making your choice. This way you can look at the maximum capacity in the different materials. The maximum capacity indicates how many millimeters can be drilled in a certain material.

Drills and chisels

If you have found a suitable rotary hammer drill or combination hammer, you should of course not forget the drills and chisels. For optimal results it is important that you use the right drills and chisels.

Rotary and combination hammers are equipped with a drill head with a click system, so that the drill or chisel is better locked in the drill head. Special so-called SDS drills and chisels must be used for this.