Car diagnostic tools

Disassembly and assessment of major part of Hitachi excavator ZX200-3 excavator 4HK1 diesel engine

tube brain deal with

Construction

(1) The tube brain deal with set up of 4HK1 diesel generator is shown in Figure 3-3-1.

(2) The tube brain deal with assembly of 6HK1 diesel engine is demonstrated in Shape 3-3-2.

Hitachi Excavator Diagnostic Tool for ZX-5A ZX-5B ZX-5G ZX-1 ZX-3 Collection

Disassembly

(1) Eliminate the cylinder brain deal with. See Figure 3-3-3 for the cylinder go cover of 4HK1 diesel engine, and Physique 3-3-4 for your cylinder mind protect of 6HK1 diesel engine.

(2) Eliminate the gasket.

(3) Remove the injector utilize connector.

(4) Take away the tube head cover. See Physique 3-3-5 for your tube head protect of 4HK1 diesel generator and Body 3-3-6 for that tube brain include of 6HK1 diesel motor

(5) Take away the gasket.

Installing

(1) Install the gasket about the decrease deal with.

(2) Mount the tube head protect, firm up the cylinder go include, tightening up torque: 18N m (4HK1 diesel motor), 13N m (6HK1 diesel generator).

(3) Put in the fuel injector control connector, and put in it entirely until the secure claw is lifted.

(4) Install the gasket on the tube mind include.

(5) Mount the tube mind protect, see Shape 3-3-7 for installing the tube head include to the 4HK1 diesel engine, and three-3-8 for installing the cylinder brain cover to the 6HK1 diesel generator. Tighten the mounting bolts in the purchase shown from the shape, tightening up torque: 18N.m (4HK1 diesel motor), 13N.m (6HK1 diesel generator).

Why You Need Autel Software Subscription (TCP) ?

Stay current with the latest Autel software versions and increase the value of your investment with the Autel Total Care Program (TCP). When you subscribe to an Autel TCP, you’ll get to take advantage of new features and functions as they roll out from Autel, including expanded coverage for the latest vehicle makes and models. Updating your tool coverage is fast and easy and the Autel Total Care Program will keep your tool running and provide you unlimited access to the latest software and functionality for a full year.

(Note: Most Autel Device is come with one year free update. After one year, You need to buy Autel TCP to get the latest update service.)

How to Pay and Get the Autel Update Service (TCP) ?

One easy way is to Pick up a Autel TCP card and enter the number from the back.

Here We Show You How to Use The TCP Card to Add The 12 More Months of Updates for Your Device.

1. Sign In on Pro.autel.com with your registered Autel ID account

2. Go to “Account” and then select “Redeem”

3. Enter TCP Code to activate extended coverage

After you finish all this, please reboot your tablet, Then you can go to enjoy your new year subscription online.

My BMW/MiniFRM module is not responding and now the power windows are not working. It’s not like earlier cars could use hand-operated switches. So I decided to read the EEPROM and rewrite the corrupted data. This article will show you How to repair BMWMini electric windows by Autel IM608.

Tools used: Autel MaxiIM IM608 FRM Info Chip: MC9S12XEQ384 Mask: 3M25J

Path On Autel IM608, go to Programmer>>Chip (EEPROM,MCU,ECU)>>Chip read & write>>Other>>BMW>>E – SERIES>FRM>XEQ384>RW

Step 1. Read D-FLASH, EEPROM, P-FLASH Check “Schematic diagram”.

Connect APA109, IM608, XP400Pro and FRM circuit board by diagrams.

Go to “Set” to check if we’ve got 5 voltage, and turn on read/write/earse validation.

Then try to “Read” D-FLASH.

Empty, that’s why it is done.

Read Partition. Also empty.

EEPROM is also empty.

So we just read and save P-FLASH as a backup.

Usually this part is intact.

Step 2. Write partition

Go to D-FLASH and select “Write partition”. (So we can get a new EEPROM to write data in.)

Set EEPROM as 16, which will give you four kilobytes of memory on EEPROM.

Set D-FLASH as 0.

Step 3. Write EEPROM back

Then I find an EEPROM file with the same part number (3456395) on Google.

Of course this EEPROM belongs to a a different car, VIN…but it allows FRM to boot.

Transfer the data file to IM608 Key Programmer.

Go to “EEE” (EEPROM), and select “Write”.

Load the EEPROM file we just found.

Write successfully.

Go back to read D-FLASH and EEPROM.

FLASH is also empty, but we have the data in EEPROM.

Step 4 . Check FRM on car

Restore FRM back, and see if it boots well.

Use an Autel Diagnostic Tool to check windows quickly.

The wrong chassis means our FRM has communications.

Before we have a DTC about FRM error.

Diagnosis>>Control unit>>Body>>FRM2 (Footwell Module 2)>>Read codes

Now our FRM comes back.

And then the rest work is to program the module the car because it comes from a different car.

Notice: IM608 doesn’t support BMW X1 FRM program.

Credits to LM Auto Repairs.

Hope this could help.

How to solve 2008 Chevrolet Avalanche P0300 Trouble code by using Xtool X100 Pad3/ X100 PAD3 SE? Check the step-by-step guide as below.

Now let’s start it.

Firstly, use the main cable and OBDII connector to connect X100 PAD3 and the vehicle (The OBD port of the vehicle is under the steering wheel.)

After The Xtool tablet is turned on, then go to Diagnosis-> America-> CHEVROLET-> Automatic selection-> Avalanche- 4WD

We have automatic air conditioning and there’s another type of legacy step for leveling system, so just operate as below for vehicle configuration property.

* Air conditioning: Auto. HVAC * Leveling system: Without (PRO Z95)

Then confirm the vehicle info read out.

Select Auto Diagnose, there are more than 20 systems need to be scanned, so just keep patient. After all systems are diagnosed, go to Engine control module-> Read Trouble Code-> Diagnostic trouble code

The fault code is P0300-00 engine misfire detected.

Then click “Clear trouble codes” to erase all the fault codes Erase the fault code successfully

Now there is no fault code.

Click “Diagnostic trouble code” to check again, it also shows “No fault code present”. After that, try to turn off the engine, and restart again. The trouble code comes back. In that case we are going to check what’s happening. Some stuff in near the spark plugs or the injectors or the high tension wires. Maybe there’s some problem with it if the trouble is going. Finally, after changing the spark plugs and the high tension wires, the system was back.

That’s whole process we use XTOOL X100 PAD3 key programmer to diagnose and clear fault code for 2008 Chevrolet Avalanche.

Highlights of GM MDI 2: 1.Multi-Languages available:English, French, German,Italian.etc. Total 30 languages to choose 2.Can do cars from 1990-2021 Year 3.we already installed the GM MDI 2 software into the Second Hand Lenovo X220 Laptop,You can use the product directly after receiving the product. 4.Support 2010-2021 year new cars 5.Support WIFI 

Autel MaxiIM IM608 PRO Highlights: 1. Upgraded Version of Autel IM608 Key Programmer 2. One Year Free Update Online on Autel Official Website 3. Comes with XP400 Pro which adds more functionality for BMW, Mercedes-Benz, as well as EEPROM reading 4. Used with IMKPA Accessories Which adds BMW EWS3 key learning, Benz NEC key learning and Benz ESL_W209 read/write/erase 5. Existing Autel IM508/ IM608 Users Can Upgrade To IM608 Pro by Purchasing XP400 Pro Programmer 6. with APB112 and G-BOX2 

The MaxiSYS MS919 is a 9.7-inch touchscreen Android-based advanced diagnostic device powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), 128GB memory. MS919 features the MaxiFlash VCMI, a 5-in-1 communication and testing tool providing wireless vehicle communications between the vehicle and tablet and supporting the latest DoIP, D-PDU, and Mega CAN vehicle communication protocols. The VCMI also functions as a 4-channel oscilloscope, waveform generator, multimeter, and CanBUS tester. The MS919 features dynamic topology module mapping for supported vehicles and its Intelligent Diagnostics feature that guides the technician from code to repair to test with detailed repair information and illustrations, and Oscilloscope preset guides and tests and waveform library. In addition, the MS919 features a rechargeable Lithium battery proving 8 hours of continuous use, a convenient docking station, and front and rear cameras. 

https://www.obdii.shop/goods-98-Autel-MaxiSYS-ms909-Diagnostic-Tablet-MaxiFlash-VCI.html The MaxiSYS MS909 is a 9.7-inch touchscreen Android-based advanced diagnostics tablet. It is powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), 128GB memory, and features an advanced VCI supporting the latest DoIP, D-PDU, and Mega CAN vehicle communication protocols. The MS909's topology module mapping capability for supported vehicles and its Intelligent Diagnostics feature will guide the technician from code to repair to test with detailed repair information and illustrations, and Oscilloscope preset guides and tests and waveform library. The MS919 has a rechargeable Lithium battery proving 8 hours of continuous use, a convenient docking station, and front and rear cameras. 

The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence. It features a 13-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory, all powering the new split-screen multi-application navigation to provide diagnostic guidance and test components to confirm repairs. Combined with the dynamic topology module mapping, enhanced AutoSCAN features and Intelligent Diagnostics options, the Ultra offers the technicians step-by-step repair guidance. The new MaxiFlash VCMI functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. The convenient docking station featured ensures you always have the power to scan. 

Top 4 Reason to get Tester III Diagnostic Tool : 1. Exclusive support for P0rsche third generation diagnostic PIWIS 3 2. New DoIP Ethernet diagnostic technology 3. Luxury car diagnosis, ultra low threshold 4. Support Porsche Models after 2002. Update method : Send SSD back or buy a new SSD PIWIS III with Piwis 3 Software Details: 1. Latest Version Software:

Dual System: V40.400 + V38.200 V40.400(with Engineering software support online programming) V38.200(with Engineering software support offline programming) 2. Functions: Diagnosis and Programming 3. Update: By SSD 4. Connection: Via USB or Wifi 5. Support Vehicles: Support all Porsche till 2021 6. Password for Laptop: 123456 7. Multi-Languages: German, English, US English, French, Italian, Spanish, Japanese, Chinese, Russia, Portuguese, Nederlands