To Sign Our Names on the Pages of History With Our Blood

Hey there, true believers! Today I’m going to walk you through the tools and techniques required to begin your foray into sculpting/modeling your own custom miniatures/details using Polymerics Sytems Kneadatite (Repackaged with a 300% markup by Games Workshop under the brand “Greenstuff”.  We will start today with a simple 3D Insignia with a relatively flat plane. You can take these tools and techniques and do much more complicated sculpts, but I highly recommend starting simple and getting a feel for the tools and the greenstuff itself. It can be a cruel mistress to the uninitiated, but we’ll get there in due time. First up, the tools of the trade. 

In the picture above, you see everything we’ll use to sculpt our insignia, sans the greenstuff itself, and plus my especially ghoulish looking feet.  On the left, you have the silicon sculpting tools. They’re, as the name implies, tipped with a semi-pliable silicon shaping tool. They’re indispensable for a couple of reasons. First off, you’ll find that greenstuff sticks to everything but the surface you’re trying to attach it to, this includes your tools. There is little more frustrating than finally getting a seam perfect in the fold of a cloak and then having the effect mangled by it sticking to your shaper. Silicon tools (plus a touch of good old fashioned MK I saliva) fix that issue quite nicely. Additionally, given that they generate a soft pressure, they can be used to smooth over rough areas in the sculpt without leaving tool marks of their own. I highly recommend finding a set of Size 0 silicon shaper tools. They’re not cheap (around $30 for a proper multi tool set), but if you’re trying to get serious about mini sculpting, you’ll be hard pressed to improve the quality of your work without these at your workbench.  In the middle, you have two sheets of picture glass. You use these to mash balls of greenstuff into flat sheets (sans fingerprints) of the thickness you need for your next detail. With a little vegetable oil (also indispensable) and a straight razor, you can lift anything you’ve sculpted right off the glass sheet, and place it on your model. This allows for a 1:1 transfer of what you’ve sculpted, without it warping or distorting when picking it up. When combined with an illustration of what your attempting to sculpt, it can function like an animators lightbox, allowing you to “trace” the image with greenstuff by laying it in position on top of the glass over the image.  To the left, you have the dental tools. They’re what you use to generate crisp & sharp lines, where you’re looking for hard contrasts between surfaces. They are more fine detail than the silicon shaper tools, but lack the malleability of the silicon tools, every tool mark will show the exact pressure exerted. You have to have a delicate touch when utilizing these (and just get comfortable with the idea that you’re eventually going to accidentally stab yourself with one), but after you’ve gotten comfortable with them, you’ll be amazed at the details you’ll be able to generate, down to the 10th of a millimeter or so.  The rest is just a razor blade, a capful of vegetable oil and the greenstuff, but the greenstuff requires some explanation in and in of itself. 

Kneadatite, or Greenstuff  is a two-part epoxy/polyamide sealant/adhesive. It comes separated into two colors, The yellow, which is the basis of the putty, and the blue which contains the chemicals that activate the curing process. When you get it in the strips like this (it’s also shipped in tubes), make sure to cut away the bit in the middle where the two colors are joined. Otherwise you’ll find bits of cured greenstuff in the surface you’re attempting to work with, and I can assure you that they rarely enhance the aesthetic.  You can mix and max the ratios to make it harder or more malleable when cured, and to adjust the working time, but for just starting out, I recommend just cutting off equal lengths and mixing them together. They start out as a tie dyed mess of blue and yellow, but eventually form into a contiguous green ball. When it has softened from the warmth and pressure and you can’t see anymore yellow or blue bits, then you’re good to go.  Well, almost… I wasn’t kidding when I said that greenstuff is a cruel mistress. Part of learning how to use the material is to understand it’s life cycle. When you first mix greenstuff, it is very soft, and can easily be formed into whatever shape you please, but it will not hold sharp detail. Any fine lines you place in the sculpt at this point will be greatly diminished by the next stage in the life cycle, what I call the “Puffy Stage” about 15-25 minutes into having formed the greenstuff, the curing process really starts to begin. you’ll note that the material becomes less pliable, and that any fine detail work you’ve put into it has been undone as the putty relieves the pressure you’ve accumulated on it with your tools by “puffing” back into the fine lines and rivet holes. If you’ve done deep lines, you’ll note that the edged of them have become slightly rounded and aren’t holding the crisp and sharp edges originally sculpted.  Don’t fret. keep working with the shape until you have what your looking for, as the detail work can begin in earnest in the next step of the life cycle, the imaginatively named “detail stage”.  The detail stage starts about 30 minutes after you first finished rolling the putty, but can be in as little as 20 or as long as 45, you’ll get a feel for it after working with the stuff for a while. You can tell that it is ready to hold detail work, as it ever so slightly attempts to hold it’s shape when you manipulate it. You don’t want it so firm that it won’t take a tool mark (the next stage) but you want to be confident that it is on it’s way to curing in the shape it’s going to set in. Another advantage of this patience is that since the putty has  begun to cure, the area around the spot you manipulate it with a sculpting tool will react less. This means you can be slightly more aggressive with your pressure and motions, and not have to worry so much about warping or distorting edges around the detail you’re working on.  The final stage is the cured stage. at this point, you can poke it with a tool, and it’ll hold it’s shape, it can be handled, shaved, sanded, clipped and glued, just like any other bit, but changing the sculpt has long since sailed. You’ll often find yourself waiting until the next day to attach greenstuff bits to your miniatures, as they’ll have ample time to have cured, and you don’t have to worry about mashing a cheekbone with your sausage fingers, or leaving your fingerprints on a pauldron.  SO! How do you apply all of this? Well, I’ll show you!

We start with the aforementioned tools, the surface we’re going to attach the new bit to (in this case, a dragon’s thigh armor) and a image of what we’re going to be sculpting. Sometimes, I do the image precisely to scale with the space I’m attempting to fill, and then sculpt over the top of the image. For this example though, I figured I’d show you how you can use it as a loose guideline. 

Using the two pieces of veggie oil lubed picture glass (just a dab will do you!) we mash our greenstuff ball down until it is flat, at the thickness we want and free of sausage fingerprints. 

Next, we lubricate our straight razor, and begin making the cuts that’ll form the wings. In this case, it’s a simple geometric pattern. Straight lines are nice and easy with the razor, but symmetry can be hard to eyeball. I generally do this on a grid mat to assist with that, but it’s for Papa Nurgle, so it can be a touch sloppy.  

Having gotten our wings established, we use a lubricated tool to make the circular indentations. Can’t stress the importance of the oil enough. 

At this stage, we’ve cut out all the shapes of the fly symbol, and affixed them to the model in location using a dot of super glue for each piece. Word of caution. Make sure that you have the piece exactly where you want it to be when you have it superglued. Superglue and greenstuff LOVE eachother and want nothing more than to immediately settle down together forever.  The pounded brass texture was accomplished using a rounded silicon tool. You can really see how they can be used to develop soft and subtle detail work, without leaving individual tool impressions. In the picture, you can see me using a normal (lubricated) mechanical pencil to make the rivets. 

Finally, the result. I used the dental tools to create the wear and tear on the piece. took some little knicks out of the side to correspond with the scratches. There is no right or wrong answer at this point, you’ve got to go with what is most aesthetically pleasing to you as an artist. Go wild with it!  Following these beginner guidelines, and practicing, you’ll find yourself turning out professional quality pieces in no time!

Hey everyone, just wanted to say thank you for following! I started this blog to be able to share my hobby with anybody who may be interested, and I am blown away that it has grown so quickly. There are so many talented hobbyists, painters, modelers, and gamers here on Tumblr that impress and inspire me every day. Thank you for being such a great community, and thanks for following notimeforwargames!

On that note, to say thanks, I would like to announce a special giveaway prize for a lucky follower! 

The prize is the Army Painter Wargamers Most Wanted Brush Set, a pack of the Masters Brush Cleaner and Preserver, and the Army Painter Wargames Painting Starter Set! This is a great set of tools and paints for someone just getting into the hobby, as well as a perfect addition to the toolbox of an expert wargamer, plus it’s all free!

Please read Tumblr’s contest guidelines if you have not already!

To enter the giveaway:

1. You have to be a follower.

2. You have to be willing to provide a mailing address.

3. Send an email to [email protected] with the title of the email being your Tumblr url, and that’s it! (Only 1 email per entrant necessary, everyone will have an equal chance of winning!)

This giveaway will be open for the next 10 days, ending on March 11th, and a winner will be randomly selected from all of those who entered! I will contact the giveaway winner at the end of the contest, and if I don’t hear from the winner after 3 days, then a new winner will be randomly selected.

Skink Shaman ready. More photos on my blog:

Here’s a bunch of shit I’ve been working on: -i cleaned off my work area finally! No more cluttered work space. -i painted a unit of Paingiver Beast Handlers as a birthday gift for my brother. He seemed to like them. -im like, 1/3 of the way done with Bearka and my friends Bradigus. Idk what I’ll paint after that. Maybe I’ll finally finish a unit of bane thralls. I’m thinking of stealing the “Armor of Mourning” color scheme from Menoth for them.