Melty Choco BJD

Materials needed: - hot glue gun (and hot glue sticks of course) - fabric (non-fraying fabric strongly encouraged) - cardstock in standard weight, flexible - cardboard with a thickness between 0.3mm to 0.5mm - zipper that matches fabric colour (only for decoration) - some kind of jewelry chain, about 20-40cm total length and openable - a ruler (and a measuring tape if you're adjusting the scale)

> Preface This is the first time I've made a bag in this way and I made an effort to choose a way that is easy and cost effective, therefore the bag features a lot of paper materials. The resulting item is somewhat delicate and should not get wet. It's best used as an accessory when taking photos, not for rough play. It may not last long term due to the type of glue used. If you want a long-lasting and sturdy bag please follow tutorials for human-sized bags with real materials! > Pattern This pattern is the rough layout of the inner structure of the bag. The long strip is made of flexible cardstock, and the bag body is semi-thick cardboard. The flaps that hold the bag chain are fabric only. This pattern is not drawn to scale and can't be printed. Please draw out the shapes on paper yourself following the measurements. The given measurements are for a bag that fits 60cm dolls and above -- it would be too oversized for anything smaller. For 60cm dolls it appears as a large bag. For larger sizes it will be smaller and may need a longer chain as well. Feel free to adjust the measurements for other sizes! Just reduce the diameter of the body circle, and adjust the length of the long strip to match the circle's new circumference. Then make the long strip width smaller, and you should be fine.

> Process First step is to cut out the pattern onto the correct materials. Circles on thick cardboard, long strip on flexible cardstock, and the the flaps out of fabric. Then just cut big loose shapes out of fabric and place the cut out pieces on top of the fabric.

Now this is where you need to get your glue gun heated up and ready. You're going to glue the fabric ends to the "bad side" of the cardboard/cardstock pieces. Try and keep the fabric taught as you glue, to make sure it's not loose over the pieces of cardstock/board.

When the fabric is all glued down, it's gonna look like an ugly mess on one side. But when you flip it over it will be nice and smooth! Repeat this process for all the cardboard/stock pieces as shown.

The next step is to take the long strip and secure it in a circle shape. Attach the ends together over top of one another with hot glue. You should check to make sure it fits the flat circles before you apply glue.

Next, cut any excess fabric from the zipper, and cut it down shorter if needed. Then glue it to the long strip. You should place it on the opposite side of the strip's joined ends. The joined ends of the long strip will be at the bottom of the bag. Just a note, this bag doesn't open. The zipper is decorative only!

You should also attach the fabric flaps that hold the chains at this point, but I forgot to take pics, so here's a little diagram sorta. Make sure the "loop" end points upwards towards the zipper. You can see the next pics for visuals on their position sorta.

The only remaining thing to do is glue the flat circles to the long strip. I didn't take pics of the process, but you just apply glue to the edge of the flat circle or the long strip bit by bit and attach the pieces together as you go. Make sure the glue is inside the bag, not on the outside, and be very generous with your glue!

You should get something that looks like this:

Now just thread the jewelry chain through the flaps, doubled up, and pull it to the right orientation.

Sorry that my example pics for showing it on the doll kinda suck. Part of her outfit (the bralette thing, you can see it falling) broke while I was taking pics so I was a bit rushed to get a pic before it completely fell off.

As stated before, on 60cm dolls the bag is large. If you made this for a 70cm doll it would be smaller. But I like the size for this scale, I think it's cute.

I left mine plain, but you can also glue bows, buttons, beads, lace etc to either side to decorate it, or attach tassels or charms to the bag chains at the sides. You could also easily use this method with different shapes to make more unique bags.

I hope this was useful to someone! I had fun making the bag and will probably make more in different shapes and styles eventually.